No need to take the mirrors off. Point the mirrors all the way down. You can use a pick tool, or even a flathead screwdriver, to get the upper tabs pushed up/down.
Yeah bro you're right, if you are familiar to remove this mirror cap, you don't have to take the mirror off. But many customers can't line up the pins very well, and they always broke the clips. The point to take the mirror is trying to make sure they can see where the clips need to align with. Generally, we use the same way like you say to help customers change the mirror. Thanks for your advice :)
@@Matt_C_N Yeah, we sell a lot of those mirrors, and we know how customers break the tabs Lol... But at the same time, if they don't work carefully, they probably will break the mirror glass too... Hard to say, we are just trying to find the best way to let customers know how to install this.😆
How to adjust the lens position to a flat angle? I think I tilted the mirror when I took it off. Now that I have the mirror back on, I cannot adjust the tilt of the lens.
Take a large flathead screwdriver, put it in between the tabs, and twist it. It'll push the top tab up and the bottom tab down. You can then use your other hand to gently pull
No need to take the mirrors off. Point the mirrors all the way down. You can use a pick tool, or even a flathead screwdriver, to get the upper tabs pushed up/down.
Yeah bro you're right, if you are familiar to remove this mirror cap, you don't have to take the mirror off. But many customers can't line up the pins very well, and they always broke the clips. The point to take the mirror is trying to make sure they can see where the clips need to align with.
Generally, we use the same way like you say to help customers change the mirror.
Thanks for your advice :)
@@DongsaiCarStyling That's a good point; I didn't consider that. I'm sure some people line it up generally and start pounding it in, breaking tabs.
@@Matt_C_N Yeah, we sell a lot of those mirrors, and we know how customers break the tabs Lol... But at the same time, if they don't work carefully, they probably will break the mirror glass too... Hard to say, we are just trying to find the best way to let customers know how to install this.😆
Link to where you got the mirror caps?
@@alexdaniels1117 Bro, can you send message to WhatsApp +8618054200136?
Hello. For G16 also we can follow same step?
Hey mate, yeah, it's the same!
How to adjust the lens position to a flat angle? I think I tilted the mirror when I took it off. Now that I have the mirror back on, I cannot adjust the tilt of the lens.
There are a few points back of the mirror, just make sure they are fixed on the back. And you push the top and bottom to adjust the mirror.
Bro the clips that u remove with you fingers are so extremely hard ive been trying for 30min omg my fingers are in pain f this
Don't just use your finger brooooo... the OEM clip is very strong, find some tool to loose it!!! 😖
Take a large flathead screwdriver, put it in between the tabs, and twist it. It'll push the top tab up and the bottom tab down. You can then use your other hand to gently pull
Link for mirror caps ?
Change music
Putain c'est long