Fixing the 3000T SCSI by flashing The Terrible Fire Accelerator firmware with a raspberry Pi!
HTML-код
- Опубликовано: 10 фев 2025
- E568: In this episode I teach you how to flash your Terrible fire firmware with a Raspberry Pi and a few commands. While the initial setup may seem daunting. it is easy with some copy/paste from the GodFather . This Fixes the TF4060 to work native with the 3000D/T scsi system and boy does it fly now! when it comes alive mona shakes them 20 min mark dont miss it
The Godfathers official instructions
wordpress.hert...
MR Alen's TF4060 setup page and firmware
alen.dreamhost...
If you would like to help me keep this going, consider supporting my channel! Through patreon for as little as 1$ a month, (heck i spend more on lunch in one day). Please Consider helping me save Amigas. 100% of funds i receive assist me in purchasing replacement parts , tools and supplies to save these beloved machines for free.
/ chrisedwardsrestoration
Or a one time PayPal donation at paypal.me/macp... you should see Captain Picard holding a green beer.
(you will see)
Thank you to all my current patrons and supporters, I cannot express how much your support means to me.Because of you and your support and generosity, I am able to fund repairs for others FOR FREE. I cannot fix everything, but i do save many. So a personal thanks directly to each and every one of you!
It’s Dangerous to go alone, take this!
be sure to check out Retro Rewind for all your Commodore goodies and services at www.retrorewind.ca
you can use my code NOCODE, to save up to an additional 15% off your next order. must be signed in for code to work Thanks everyone!!!
Tools used in this video:
The Retrofriends, GBS8200 vga box, 75$ on ebay usa. 99 for a hdmi one
www.ebay.com/u...
Tonya - a hammer
www.harborfrei...
Lorena Bobbit
www.harborfrei...
Aven Desoldering Wick
www.mouser.com...
Jonard IC extractor
www.amazon.com...
Kester 186 liquid No Clean Flux that you have to clean
www.amazon.com...
BackBit Chiptester pro v2
store.backbit....
DIP Pin Straightener
retrorewind.ca...
Helmet of Goober:
www.amazon.com...
Solder station WepTools 853d-5AII
www.weptools.c...
Desoldering station WepTools 948d3
www.weptools.c...
Wep 982_III Precision soldering station
www.weptools.c...
Wep 982D3 Precision Hot Tweezers and soldering station
www.weptools.c...
Fume Extractor: Weptools 948DQ
www.weptools.c...
Siglent SDS1052DL digital oscilloscope
www.amazon.com...
Kotto silicon solder sucker aka Moana3
www.ebay.com/i...
Joyalense Digital microscope:
amzn.to/3rQhwKk
Thermal Master P2PRo FLIR Camera
thermalmaster....
TV pixel display and wall pixel display
www.divoom.com
like the wall neon? get it here
www.retroledsi...
VTOMAN Jump 1500x Powerstation
vtoman.com/col...
That feature on the TF4060 is an amazing option. I updated the firmware on my card in the A4K in the networked up workshop using putty and ssh from my PC.👍
Thank you Dr Chris diagnosis and treatment executed perfectly.
Story how this was fixed:
My friend here in Sweden lend me an A3000T. I connected it to my network, added a VGA->HDMI adapter. using a BliKVM (to remote control PCs most servers remotly. where you remote a machine with mouse/keyboard etc) and using RiskyKVM USB keyboard-> mouse adapter. and then Terriblefire remoted to me from Scotland. and fixed it remotly..
Math and science at its finest! Danke!
So happy - new video! Awesome!!
Always learn something 😃
Hi Ya & best wishes. SuperB! Thanks for work. Be Happy. Sevastopol/Crimea.
11:00 - Have you tried triple-click on a line to select the sentence? Works for me with most apps on my Win 10 PC...
i was using ubuntu, it has a little square thing you click to clipboard copy. but ill try the triple click
The gluten free twisties are quite good, don't make you as sick feeling after a whole packet.
05:27 I usually use tan for flashing... 👀
Nice!
Thanks for the tutorial Dr Chris 👍🏻 Unfortunately this sort of thing puts me off from buying the newer stuff 😔 Back in the day with the Phase 5/DCE Cyberstorm, it was just a case of download a file onto floppy, boot from it, execute the firmware flash. Job Done. It think a lot of these innovators need to carefully think that not all of us like to tinker and mess just flash a firmware 😳 Cheers 🍻
that would:
1. Make the board more expensive
2. Take longer to develope
3. NOT update the cpld/fpga code. it would only update the software.. those old cards could only update the software not the hardware (cplds)
@@ChuckyGangSo be it. But give the end user a choice. Everyone of these great cards has an Achilles heal, which is always how you have to update them. The Apollo Vampire cards just used a USB blaster. Now-a-days you have to buy and solder stuff… Just my 2 cents (Pence) on the subject. Puts off the normal person. Always believe in the K.I.S.S principle. To me, a lot of these new products are too rushed and more time should be spent on them. Even those who spend time building the boards should think about pins for headers etc… Feels like you get short changed. Each to their own.
@@cullmaster7361 USB blaster can be used on the TF4060 to change the FPGA. but it also have a CPLD. this IS done by the KISS principle and THAT is why a inplace from amiga-way is not possible. as the very very second you start an upgrade you will halt ANY cpu progress. meaning it is impossible, unless you had a extra cpu somewhere doing the job. people nag about the price already. add yet another 100-200eur for this possability would make people just go bananas..
pins and headers? for what? upgrading? not needed.. I have shown on my TF1260 flash videos how to do it without those unnecessary headers.
@@cullmaster7361 also. this pi will in the future be used for more features. not just flashing the firmware..
@@ChuckyGang I get your point of view from an engineering perspective. But again, all you need to do is give the end-user the options. A card where it’s DIY and cheaper and spend monte monies later or a fully blown card where you can just upgrade it. As the furry Meer cat on the U.K. compare the market AD says “Simples!”. Let the end user decide. As an example of the issues I and others faced with the BFG card. I got so fed up with how it was so flaky with certain setups. A lot of us abandoned it as you then had to mess around with it, soldering this bit, then buying this bit this, then work out how to then flash firmware. If you don’t believe me, check out the Amiga forums. I’m considering buying the Z3360 card. But am happy for the dust settle as much as possible first. Not getting bitten again…. Not here to argue, just putting my case out there. Happy that new innovations are coming out etc..
And oh when we have a better pi setup I will make it more easy. as the pi will be useful even from the amiga... :)
Watch out Analogic will charge you VAT when you should not pay it. I just noticed all my orders over the last 4 years included VAT and I live in good old America. I have a mind to email them and tell them to send me an AGA chipset in place of a refund!
Shalom to All
Hello what max 68040 mhz overclock? Mask L88? Thanks
i wouldnt push a 25 more than a 33mhz bump, the 040 runs hot as is, any overclocking would surely bake her.
👋🤜🤛🤝👏💥
ruclips.net/video/Q_4bp8bBNVw/видео.htmlsi=dJxUxaAXS49cnhwP
I have use that one lol