How many of you have looked at Axminister's site since they started sponsoring me? Use this link to help support the channel 😁👍: www.tagserve.com/clickServlet?AID=3456&MID=485&PID=691&SID=4242&CID=1965&LID=1276&SUBID=
To my eyes, this has more beauty than any Greek urn, or Japanned item. You have found yet another artistic way of doing what you do so well: showing off the beauty of natural materials. And for that, thank you.
Harry, I like this piece. Let me say up front that it is beautiful. As I have gotten older I find myself drawn to this type of turning. I like it’s beauty. The black and gold work excellent together. The turning is evidence of your experience. Thank you so much. Best wishes to you.
I use black lacquer spray a lot and gold gilt cream. When the lacquer is dry I put on a surgical glove and load it lightly with the gold cream. I turn the lathe back on and touch it here and there with the point of my gloved finger and the effect is very pleasing.
Hi Alan, thanks for your comments and also for sharing your particular technique. Sounds good. Is there any specific technique that you would like me to focus on 🤔 .... 😃🪵👍
I guess that worked Allright, Allright !! You never cease to surprise us with one beauty after another! I am so happy to have found your channel. It has provided hours of delight watching you create masterpieces!!!!
Thank you so much Annmarie! I really appreciate the support, without subscribers like you I wouldn't be able to produce these videos. On a side note, would you like to see me use this finish more often? 😁👍
@@HarrySmithWoodturning I think it would depend on the piece Harry, I'm partial to the natural grain showing so that's not an easy question to answer. 💗💗💗
Who knew?! Oh my land! Absolutely breathtaking! All of your pieces are beautiful and exquisite and I love every one of them but I have to say this one is my favorite! When you started spraying I was .... OK let's just wait and see. Then you put the gold on and I was... ohhh not to sure... but oh my! Love it! I would have never imagined the grain popping like it did!
@@HarrySmithWoodturning I'd love to see more. I'm subscribed to your channel, so I watch all of your videos. I'm not one for painting, but the grain, the black, and gold just popped out. Going to give this a try on my lathe.
Nicely done. Did myself a table lamp base in exactly the same way. Gotta be quick rubbing off the excess gilding tho. Dries real quick. Ended up using methylated spirits to do it👍👍
I had my doubts about the black paint because I love the natural wood grain to show. Adding the gold made it really pop though. So I concede to the better color choice. Beautiful job.
Thanks Chris, I'm really pleased you liked it. Sometimes Ash can be a little boring, that's why I chose this finish, plus you can't beat a little BLING! Is there any specific technique that you would like me to focus on 🤔 .... 😃🪵👍
@@HarrySmithShorts I have expanded my knowledge of diverse subjects due to the pandemic. I work in a public library, so I love learning new things. I have very little experience in woodworking, but took a class in middle school in the 1970's, one of three girls to in a woodshop ever at the middle school. I never got the opportunity to turn wood back then. But I enjoy watching others create. So as for techniques, I have no suggestions at all, I'm just watching to learn and be entertained, but I love art!
Looks awesome. Maybe look into using an ebonizing solution instead of spray paint. If needed you can also boost the darkness by using a tannin solution on woods that don’t have a bunch of tannins before ebonizing the piece.
Many thanks for sharing Erik, this was an ebonizing spray not just a paint spray. Is there any specific technique that you would like me to focus on 🤔 .... 😃🪵👍
Hello Harry! Here’s why I liked this video: I also use HSS tools and carbide studs. These are sometimes very useful. I liked the different phases of machining mixing HSS and platelet tools. And the finish is really very successful, you made a very beautiful object!
That came out beautifully! I really like how you stop as you work, it looks like you are seeing what the wood has to say about the finished product. That either sounds nuts or you know EXACTLY what I mean, I do the same thing with other art forms, even what belongs in a painting or drawing and what to leave out. :)
C’est vraiment un très bon travail Harry bravo finition top couleurs magnifique 👍👏 ton mandrin avec grande mâchoire est rassurant c’est quel marque merci pour ton retour Harry 👍🇨🇭
Merci Denis, Désolé pour ma réponse tardive. Le mandrin et les mâchoires peuvent être visualisés en utilisant le lien ci-dessous. Je les recommande vraiment; ils sont fantastiques pour les gros objets. Acheter via ce lien soutiendra également la chaîne 😁👍www.tagserve.com/clickServlet?AID=3396&MID=485&PID=691&SID=4175&CID=1965&LID=1276&SUBID=&TARGETURL=www.axminstertools.com/axminster-evolution-sk114-woodturning-chuck-m33-x-3-5mm-106885?queryID=89e3386e8e5d85f39489ae08bf6e607a www.tagserve.com/clickServlet?AID=3396&MID=485&PID=691&SID=4175&CID=1965&LID=1276&SUBID=&TARGETURL=www.axminstertools.com/colossus-150mm-gripper-jaws-210887
I would love to have the speed control your lathe has. Mine is as analog as it gets. Very little speed adjustment. I can't turn items slow like you do when you start this video
Great video Harry. Use of gold leaf on ebony background really brought out the veins of the wood. Do you build these items purely on inspiration or based on something that you have seen or liked? It seems that you create these items without lots of measurements so they are unique items.
Thank you Rob! I get inspiration from everywhere, and I hardly ever measure, I just go for it and adapt my design throughout the turn 😊👍 Would you like to see me use this finish more often? 😁👍
@@HarrySmithShorts I'm always intrigued by hollowing. I can turn the shape you did (not as well) but hollowing still challenges me. I was hollowing a smaller vase today and have a hard time doing it smoothly, avoiding catches. I managed, but would like to do it better. I realize, though, that showing hollowing is, by its nature, difficult. even on full length videos.
@@joshblumenthal4873 it's not my favourite part Josh. I have issues with it also. Just patience, work slow and with fluidity. But it can all go wrong very quickly ... 😃🪵👍
Interesting. How deep is the internal cavity? Is it protected with some sort of finish? We can’t really tell. Can the finished piece actually hold a bouquet of flowers and water?
Thanks for watching Gary! The cavity goes to the bottom of the vase and it is protected by sanding sealer, however it wouldn't be able to hold water 😊👍
What an awesome gaint vase you've turned and I like the black spray paint, I was abit weary at first. The grain is great and the gold finishes it off. Was it soft or hard wood to turn? Well done Harry
Hi Jed, I would say, Firstly - be a wood turner or crafter, Secondly - like or use Axminster products and Thirdly - approach them. Did you enjoy the video? 😃🪵👍
Nicely turned from an unusual piece of original stock. But personally, I think it would have looked much better with a medium-dark stain on the original wood. The black with the gold highlights makes it look tacky.
![[SFM] Risky Recital](http://i.ytimg.com/vi/RzNkY1_Nk3o/mqdefault.jpg)
How many of you have looked at Axminister's site since they started sponsoring me? Use this link to help support the channel 😁👍: www.tagserve.com/clickServlet?AID=3456&MID=485&PID=691&SID=4242&CID=1965&LID=1276&SUBID=
WOW magic !!!beautiful
Thanks Manu, just call me Harry Potter 😂🤣.
@@HarrySmithShorts 😂
@@manutaveau5929 🧙♂️
The things this guy does with a log, most people throw on a fire, is staggering. He’s a wood wizard with a variety of metal wands.
😂🤣 Thanks Thomas that's praise indeed, I appreciate it!!
I was hating this until that gold paint in the grain trick and then.. BAM! I loved it.
Thanks Cowboy I'm glad the finished piece managed to change your mind... 😃🪵👍
@@HarrySmithShorts I live with artists... In my life, I've learned to with hold judgement until the finished product is revealed.
@@CowboyDave1812 very wise Dave, I expect it would save on a great deal of crossed wires and misunderstandings ... 🪵😃👍
Wow very pretty. Looks like a topographic map with the grain and gold
Thank you! Yes I see that resemblance. Would you like to see this finish used again? 😊👍
I love love love 💘 💗 💕 this piece.
Thank you Maria! Would you like to see me use this finish more often? 😁👍
@@HarrySmithWoodturning Yes I would.
Just awesome and stunningly beautiful
Many thanks Kobie, I'm glad you liked it, did you have a favourite part of the turn? 🪵😃👍
Yes everything about it. I love wood and discovered wood turning on RUclips and now that is all I watch. Anything to do with wood is just awesome.
Very pretty. Wasn't sure when you were painting black. Gorgeous.
Thanks for your comment Judy. Sounds like a Rolling Stones song. Is there any specific technique that you would like me to focus on 🤔 .... 😃🪵👍
To my eyes, this has more beauty than any Greek urn, or Japanned item. You have found yet another artistic way of doing what you do so well: showing off the beauty of natural materials. And for that, thank you.
Many thanks for your kind comments Nigel. Is there any specific technique that you would like me to focus on 🤔 .... 😃🪵👍
Neat idea. That would have a place in the house.
Thanks Robert you obviously have a good eye for class object d'art. 🪵😃👍
Beautiful, absolutely beautiful 🌞
Many thanks Ray, Is there any specific technique that you would like me to focus on 🤔 .... 😃🪵👍
Can be summed up with one word; talent.
Very, very, very nice. It's beautiful.
Thank you very much Linda! Would you like to see me use this finish more often? 😁👍
What an incredible piece. When you sprayed it black, I did panic a little... But OMW!!! The finished item❣️❣️❣️
Thanks Venita, I'm glad you liked it, it's a great finish to work with but can be Marmite to some ... 😃🪵👍
Colouring super 👌🏻
Thank you! Would you like to see me use this finish more often? 😁👍
what kind of woods is easy to work and transformed , like always the final result impress me .Great video,thank you dear Harry Smith.
Thank you Joe! Would you like to see me use this finish more often? 😁👍
Nicely done, Harry!
Thank you Curt! Would you like to see this finish used again? 😊👍
Every time I thought I knew where you were going with this it completely changed! It looks very Egyptian. Gorgeous.
Thanks, I like to keep you guessing Elle! 🤣
I'm glad you liked it, did you have a favourite part of the turn? 🪵😃👍
Once again, my friend- you leave me absolutely amazed! So beautiful!
Thank you very much! Would you like to see me use this finish more often? 😁👍
@@HarrySmithWoodturning definitely! As much as I love the look of natural wood, I like this as well. Get creative! 😉
Harry, I like this piece. Let me say up front that it is beautiful. As I have gotten older I find myself drawn to this type of turning. I like it’s beauty. The black and gold work excellent together. The turning is evidence of your experience. Thank you so much. Best wishes to you.
WOW that's awesome ❣️❣️❣️
Thank you Gaynl! Would you like to see me use this finish more often? 😁👍
I use black lacquer spray a lot and gold gilt cream. When the lacquer is dry I put on a surgical glove and load it lightly with the gold cream. I turn the lathe back on and touch it here and there with the point of my gloved finger and the effect is very pleasing.
Hi Alan, thanks for your comments and also for sharing your particular technique. Sounds good. Is there any specific technique that you would like me to focus on 🤔 .... 😃🪵👍
@@HarrySmithShorts Thank you Harry. I would like to see some small off-centre turing.
Fantastic finish Harry, well done!
Thanks Michael you didn't find the finish a bit tacky then?? 😃🪵👍
Looks great. Well done.
Thank you Doug! Would you like to see me use this finish more often? 😁👍
@@HarrySmithWoodturning sure thing
Absolutely amazing Harry.
Take care mate.
Cheers, Huw
Thank you as always Huw! Would you like to see me use this finish more often? 😁👍
@@HarrySmithWoodturning Yes please. I have them as well but don't really use them very often. It would be good to get some ideas. Thanks Harry
@@WoodenItBeNice thanks Huw ... 😃🪵👍
That turned out really nice.
Thank you Randy! Would you like to see me use this finish more often? 😁👍
@@HarrySmithWoodturning Yes, it's very beautiful and makes the piece look priceless.
@@randycline1385 thanks for the additional information Randy ... 😃🪵👍
Turned out nice.
Thanks Brad, Is there any specific technique that you would like me to focus on 🤔 .... 😃🪵👍
@@HarrySmithShorts Keep doing what you are doing.
@@bradwiebelhaus7065 absolutely will Brad ... 😃🪵👍
Wow! That is beautiful!
Many thanks Mr V, I'm glad you liked it, did you have a favourite part of the turn? 🪵😃👍
Beautiful job
Thank you Dotty! Would you like to see me use this finish more often? 😁👍
I guess that worked Allright, Allright !! You never cease to surprise us with one beauty after another! I am so happy to have found your channel. It has provided hours of delight watching you create masterpieces!!!!
Thank you so much Annmarie! I really appreciate the support, without subscribers like you I wouldn't be able to produce these videos. On a side note, would you like to see me use this finish more often? 😁👍
Just Beautiful!! 💕💕💕💕
Thank you Rennae! Would you like to see me use this finish more often? 😁👍
@@HarrySmithWoodturning I think it would depend on the piece Harry, I'm partial to the natural grain showing so that's not an easy question to answer. 💗💗💗
@@rennaehanson9996 thanks Rennae but a little non-committal... 🤔 I will have to produce something which will blow your mind!!! 😃🪵👍
@@HarrySmithShorts Hahahahahaha 🤪🤣🤪🤪🤪 I love everything you create Harry, very difficult to choose!
That's absolutely gorgeous
Thank you Sue! Would you like to see this finish used again? 😁👍
Why having doubts? When You're at the lathe everything works! Really a masterpiece, wel done!
Thanks Umberto, I'm really pleased you liked it. Is there a specific technique that you would like me to focus on next time 🤔 .... 😃🪵👍
It looks like the vases discovered in an Egyptian Tomb. 😍🏺
Hi Andrew - I just hope there aren't any internal organs inside ..! 🧠🫀🫁
@@HarrySmithShorts 😆👍
Very elegant piece and I love the new lathe and tools.
Thank you Sol! Would you like to see me use this finish more often? You'll certainly see more of the new tools in upcoming videos😁👍
Great work Harry, what a beautiful finish
Thank you Dave! Would you like to see this finish used again? 😊👍
@@HarrySmithWoodturning Yes but how about silver on a deep red background
@@taysider01 oooo sounds nice 😃🪵👍
Great piece Harry, really effective. Stay safe, John
Thank you as always John! Would you like to see this finish again? 👍😁
Great finish Harry, if you do more projects using this finish I would welcome that. Take care, John
Who knew?! Oh my land! Absolutely breathtaking! All of your pieces are beautiful and exquisite and I love every one of them but I have to say this one is my favorite!
When you started spraying I was .... OK let's just wait and see. Then you put the gold on and I was... ohhh not to sure... but oh my! Love it! I would have never imagined the grain popping like it did!
Thank you I really appreciate the comment! I've used this finish a few times now, would you like to see me use it more often? 😁👍
@@HarrySmithWoodturning for sure! Yes please!
Good work!
Thank you aldebaran, Is there any specific technique that you would like me to focus on 🤔 .... 😃🪵👍
Absolutely beautiful. That was a great idea.
Many thanks James, I'm glad you liked it, did you have a favourite part of the turn? 🪵😃👍
@@HarrySmithShorts I liked the choice of paints. The gold on black makes the vase stand out.
Wow. That was amazing. I’d never even think of doing something like that. It turned out beautifully.
Many thanks Chanda, I'm glad you liked it, did you have a favourite part of the turn? 🪵😃👍
Good good thank your video
Thanks for watching! 👍😊
So beautifully made
Thank you! Would you like to see this finish used again? 😊👍
@@HarrySmithWoodturning yes harry it’s very pretty looks good with the grain showing through
@@untamedtiger657 great, as I love working with this material ... 😃🪵👍
Beautiful work sir have a great weekend ✌️
Thanks very much mate! Have a great weekend too! 😁👍
That looks amazing.
Thank you Len! Would you like to see me use this finish more often? 😁👍
@@HarrySmithWoodturning experimenting is always fun, especially when it works. And when it doesn't, you make design modifications.
Very nice!
Thank you Ronnie! Would you like to see me use this finish more often? 😁👍
@@HarrySmithWoodturning
Sure, I enjoy watching all of your wood turnings.
Beautiful work.
Thank you Matthew! Would you like to see me use this finish more often? 😁👍
Absolutely beautiful!!!
Thank you John! Would you like to see me use this finish more often? 😁👍
Anova' banga' mate!! Cheers!🍻
Beautiful !!!
Thank you! Would you like to see me use this finish more often? 😁👍
very nice looking item.
Stunning 💛Love it.👍
Thank you . . . 😃🪵👍
Superbe pièce de bois beau travail magnifique
Awesome.
Many thanks Jack, I'm glad you liked it, did you have a favourite part of the turn? 🪵😃👍
@@HarrySmithShorts it was all awesome. I'd have to watch again to puck.
Amazing as always!
Thank you Martin! Would you like to see me use this finish more often? 😁👍
@@HarrySmithWoodturning yes. But your natural finishes are also fantastic!
@@martinpennock9430 thanks Martin!! 😃🪵👍
@@HarrySmithShorts You are most welcome!
Wow, that really turned out beautiful!
Thank you Kenny! Would you like to see me use this finish more often? 😁👍
@@HarrySmithWoodturning I'd love to see more. I'm subscribed to your channel, so I watch all of your videos. I'm not one for painting, but the grain, the black, and gold just popped out. Going to give this a try on my lathe.
Cool gemacht.👍👍👍👍👍👍
Beautiful
Great work!
Very nice work-pretty
Exquisite design...I love it!
Thank you Vivian! Would you like to see me use this finish more often? 😁👍
Well done.
Thank you Josephine! Would you like to see me use this finish more often? 😁👍
Nicely done. Did myself a table lamp base in exactly the same way. Gotta be quick rubbing off the excess gilding tho. Dries real quick. Ended up using methylated spirits to do it👍👍
Thanks Pedro, I appreciate the comment I think the finish looks really classy, I'm sure the lamp looked great 👍 😀 🪵
Nicely done.
I'd like to know more about this ebonizing spray you used, please.
Hi JT, its a standard spray that you can purchase from most good woodworking outlets ... 😃🪵👍
Wow 👌
Many thanks . . . 😃🪵👍
love the shape and color combo, very elegant! that flat spot on the side is bugging my OCD though 😅
Thank you! I didn't want to reduce the vase anymore so that flat spot had to stay 😂 Would you like to see me use this finish more often? 😁👍
That is stunning. Great work.
Que trabajo hermoso y tan delicado!!!!💖💖💖
un genio te felicito que hermoso trabajo 👏💕
Many thanks Alberto, I'm glad you liked it, did you have a favourite part of the turn? 🪵😃👍
Very Nice!
Thank you Jeffrey! Would you like to see this finish used again? 😊👍
I had my doubts about the black paint because I love the natural wood grain to show. Adding the gold made it really pop though. So I concede to the better color choice. Beautiful job.
Thanks Chris, I'm really pleased you liked it. Sometimes Ash can be a little boring, that's why I chose this finish, plus you can't beat a little BLING! Is there any specific technique that you would like me to focus on 🤔 .... 😃🪵👍
@@HarrySmithShorts I have expanded my knowledge of diverse subjects due to the pandemic. I work in a public library, so I love learning new things. I have very little experience in woodworking, but took a class in middle school in the 1970's, one of three girls to in a woodshop ever at the middle school. I never got the opportunity to turn wood back then. But I enjoy watching others create. So as for techniques, I have no suggestions at all, I'm just watching to learn and be entertained, but I love art!
Nice one mate!
Thank you Mate! Would you like to see me use this finish more often? I just love it 😁👍
Looks awesome. Maybe look into using an ebonizing solution instead of spray paint. If needed you can also boost the darkness by using a tannin solution on woods that don’t have a bunch of tannins before ebonizing the piece.
Many thanks for sharing Erik, this was an ebonizing spray not just a paint spray. Is there any specific technique that you would like me to focus on 🤔 .... 😃🪵👍
Stupendo
Many thanks Ezio, I'm so glad you liked it. Is there any specific technique that you would like me to focus on 🤔 .... 😃🪵👍
WOW 😳
Thanks Bronwyn, I hope that's a good WOW? Is there any specific technique that you would like me to focus on 🤔 .... 😃🪵👍
@@HarrySmithShorts just keep on truckin', Harry 👍 you are awesome!
Very nice and beautyfull!
Thank you very much Philippe! What was your favourite part of the video? 😁👍
Hello Harry! Here’s why I liked this video: I also use HSS tools and carbide studs. These are sometimes very useful. I liked the different phases of machining mixing HSS and platelet tools. And the finish is really very successful, you made a very beautiful object!
Lindo trabalho.
Thank you Claudio 🪵😃👍
Какая красота, вы мастер!
Many thanks for your comment. Is there any specific technique that you would like me to focus on 🤔 .... 😃🪵👍
Комментарий в поддержку канала и ролика, а также труда мастера.
Thank you for your comment. I prefer to let the wood speak for itself and allow the tools to tell their own story as they make their changes. 🪵😃👍
That came out beautifully! I really like how you stop as you work, it looks like you are seeing what the wood has to say about the finished product. That either sounds nuts or you know EXACTLY what I mean, I do the same thing with other art forms, even what belongs in a painting or drawing and what to leave out. :)
C’est vraiment un très bon travail Harry bravo finition top couleurs magnifique 👍👏 ton mandrin avec grande mâchoire est rassurant c’est quel marque merci pour ton retour Harry 👍🇨🇭
Merci Denis, Désolé pour ma réponse tardive. Le mandrin et les mâchoires peuvent être visualisés en utilisant le lien ci-dessous. Je les recommande vraiment; ils sont fantastiques pour les gros objets. Acheter via ce lien soutiendra également la chaîne 😁👍www.tagserve.com/clickServlet?AID=3396&MID=485&PID=691&SID=4175&CID=1965&LID=1276&SUBID=&TARGETURL=www.axminstertools.com/axminster-evolution-sk114-woodturning-chuck-m33-x-3-5mm-106885?queryID=89e3386e8e5d85f39489ae08bf6e607a
www.tagserve.com/clickServlet?AID=3396&MID=485&PID=691&SID=4175&CID=1965&LID=1276&SUBID=&TARGETURL=www.axminstertools.com/colossus-150mm-gripper-jaws-210887
Merci Harry c’est sympa 👍👏👋
Yes, AGREE 💯
très beau, bravo.
Thank you Jean! Would you like to see me use this finish more often? 😁👍
I would love to have the speed control your lathe has.
Mine is as analog as it gets. Very little speed adjustment.
I can't turn items slow like you do when you start this video
Thanks, It's my new upgraded Axminster Professional lathe its the best! I feel spoilt now, my old lathe only had 7 set speeds. 😃🪵👍
Una verdadera joya
Many thanks for your comment Andoni. Is there a specific technique that you would like me to focus on 🤔 .... 😃🪵👍
Great video Harry. Use of gold leaf on ebony background really brought out the veins of the wood.
Do you build these items purely on inspiration or based on something that you have seen or liked? It seems that you create these items without lots of measurements so they are unique items.
Thank you Rob! I get inspiration from everywhere, and I hardly ever measure, I just go for it and adapt my design throughout the turn 😊👍 Would you like to see me use this finish more often? 😁👍
@@HarrySmithWoodturning One of the thing that I like about your creation is variety. Please continue to make different things as you have been doing.
Another beautiful creation. What did you do with the inside?
Hi Josh many thanks, the inside was left natural but treated with sanding sealer. Did you have a favourite part of the turn? 🪵😃👍
@@HarrySmithShorts I'm always intrigued by hollowing. I can turn the shape you did (not as well) but hollowing still challenges me. I was hollowing a smaller vase today and have a hard time doing it smoothly, avoiding catches. I managed, but would like to do it better. I realize, though, that showing hollowing is, by its nature, difficult. even on full length videos.
@@joshblumenthal4873 it's not my favourite part Josh. I have issues with it also. Just patience, work slow and with fluidity. But it can all go wrong very quickly ... 😃🪵👍
Interesting. How deep is the internal cavity? Is it protected with some sort of finish? We can’t really tell. Can the finished piece actually hold a bouquet of flowers and water?
Thanks for watching Gary! The cavity goes to the bottom of the vase and it is protected by sanding sealer, however it wouldn't be able to hold water 😊👍
Super
Hello, the vase is really beautiful. What did you pre-treat the wood with? The finish looks amazing.
Hi Dennis, the wood was treated with sanding sealer prior to the ebonising spray. Glad you liked it
. . . 😃🪵👍
Harry thats better than a watermelon, and it really did work out looks cool and that techie, what's the gold powder, ???🏅🏅🏅
Thank you Ernie! The gold is called Gilt cream 😊👍
But you can't beat a Water Melon 🍉 !! 😃🪵👍
What an awesome gaint vase you've turned and I like the black spray paint, I was abit weary at first. The grain is great and the gold finishes it off. Was it soft or hard wood to turn? Well done Harry
Thank you Amanda! I made it using Ash which is a hardwood Would you like to see this finish used again? 😁👍
@@HarrySmithWoodturning yes please it really looked nice
@@amandatallis9875 ok, booked for a future project! ... 😃🪵👍
😍👌روعه يافنااااان
Now that is uniqeu
Thank you Tinus, I'm glad you liked it, did you have a favourite part of the turn? 🪵😃👍
The whole vidio was entertaining
Мастер!!!!❤👍👏🎖
what do you have to do to get sponsored by axminster?
Hi Jed, I would say, Firstly - be a wood turner or crafter, Secondly - like or use Axminster products and Thirdly - approach them. Did you enjoy the video? 😃🪵👍
@@HarrySmithShorts yes i realy enjoy your videos.
@@HarrySmithShorts do you have to show pictures of your work?
@@jedferguson5376 glad to hear that Jed ... 😃🪵👍
@@jedferguson5376 oh yes, lots of footage ! 😃🪵👍
🤩🤩🤩🤩
Nicely turned from an unusual piece of original stock. But personally, I think it would have looked much better with a medium-dark stain on the original wood. The black with the gold highlights makes it look tacky.
Thanks for your comment Bob, but I let it dry thoroughly before applying the gold, it wasn't tacky. 😃🪵👍 🤣😂
👍
Thank you! Would you like to see me use this finish more often? 😁👍
That's not a watermelon 🤣😂😆.Ernie smith from brisbane Australia
Thanks for watching Ernie! It looks better but the watermelon did taste nicer 😂😉👍