DIY Adjustable Cable Machine (Detailed Build Vlog - HOW TO VIDEO)
HTML-код
- Опубликовано: 26 сен 2024
- Here are the plans:
drive.google.c...
Here is the website where I purchased parts:
www.exercise-e...
$1000 for everything. $500 for the 250lb weight stack ($2 per pound), $250 for accessories including pulleys, $250 for metal (from the scrap yard). - Хобби
Dude that build is so good you'd think it was a commercially available piece of equipment from established manufacturers rather than a DIY project. Huge respect.
thank you brother more coming soon
@@solomonmachine2137 looking forward to it. If I had access to metal working tools/machinery I'd seriously have a go myself but sadly I don't 😥
This is astonishing! This is the best diy gym equipment video on RUclips because of all the explanation, easy to follow. Keep them coming!
I agree
thank you, I love you
You have made a fantastic machine and a very comprehensive yet easy to follow how-to video - best I have found on RUclips! I love your relaxed approach and the paint job, too.
Cant believe this is your first one, nice job!
if you set the stack at 40 it feels like 20lb at the handle.. no it doesnt feel like 20 it actually is 20 at the handle. Also, the missing energy you speak of , as you said, results in twice the range of motion of the travel of the load up and down the guide rods but the reason there is less energy required to move the weight is because half of the weight is being supported by the other end of the cable which is fixed to the adjuster. Your video is awesome and I havent seen anyone else on youtube just hauling off and fabricating an adjustable pulley system. Great spirit man and your machine is flawless. Impressive.
you look very happy using the machine hope you build a whole homegym equipment and be buff i enjoy watching this brother👌
Just watched the wooden one he made also just before and now I’m watching this one and it clear to me now he makes em cos he likes to and he sells em for more than the cost of the make with all em ❤.
Dude.
This video was truly what I needed to watch on my lunch break. It was so, chill and entertaining. Really, really, enjoyed how you broke it down and made it seem like I can build this! Also love that your video is long. So many other youtubers are going to this 5 mins or less crap. You just can't tell the story in that amount of time. Good job 👏 👍
Thanks man glad I could help! I got some other vids coming out soon like a leg extension and an adjustable bench
amazing work. you are maybe the only one to explain how to make an adjustable pulley system. thank you
Very nice!
I was ramping up to build something like this. Had the design complete and was pricing materials out. Just the weight stack was well over $500.
I looked on Facebook marketplace to find a donor weight stack, and found an entire complete machine for $200. So, I went with that.
I’ve been trying to figure out how these work to make for my home gym, this video is perfect
Be sure to do vids for other builds you make. Nice work!
I’ve got a lat pull down/low row machine coming up soon!
@@solomonmachine2137 Thanks for the headsup, i'm already subbed and got that bell noti set ;p
@@solomonmachine2137 If you could combine them that would be incredible. Make it 1:1 for the fixed high and low pulley for pulldown/row and then 2:1 for the adjustable pulley. Is that possible?
Brilliant! Open your own fabrication shop for DIYers, inspirational.
This is one of the neater builds on you tube. Well done!!
thank you, coming from somebody who i presume is a real machinist or a hobby machinist I really appreciate your opinion. I really want to be able to have access to a mill, maybe someday
@@solomonmachine2137 just keep your head down and keep posting quality stuff and you'll earn your mill and or lathe. GOOD LUCK!!!!
The final product is very nice! It is also very well explained! I browsed several other videos of DIY cable machine and no video is well detailed like this one. Can't wait to see your next projects!
Hell of a first build, great instructional detail. Look forward to more 👍
Thank you for the kind words.
Great build! And thanks for the drawing, can't wait to build one myself
I thought the same thing with the drawing. From his hand to paper. Then paper to design on software.
i dont mean to be offtopic but does anyone know a way to get back into an instagram account??
I stupidly lost the password. I would appreciate any help you can give me.
@Devin Amari instablaster =)
@Cesar Yehuda I really appreciate your reply. I got to the site on google and im waiting for the hacking stuff atm.
Takes a while so I will reply here later when my account password hopefully is recovered.
@Cesar Yehuda It did the trick and I actually got access to my account again. I am so happy:D
Thanks so much, you saved my account !
For the price this one is by far better than rogue machine
The machine you've made is beautiful.
Also, you look like a medieval European peasant from Mount and Blade. You're also beautiful, nohomo.
This is fantastic.
I really liked it. I hope to see more. I'm thinking of building one, but it would be double I believe.
Thanks for the inspiration 🙂
My prediction: this channel is going to blow up! Very cool!
i wish man! idk if there is a market for this kind of specific video. Thanks for your comments though! keep on doing what you're doing
Great .... thank you partner .... you have been a great inspiration ... it is what I was looking for .... blessings.
Sir jee aap bahut dimak wale hai. Aap ke aisi idea se hum gareeb log bhi ye machine bana lete hai. Please aap gym machine ka video jarur dale. Bahut bahut Dhanyawad. Jai hind.
jai hind. Thank you very much.
Really Nice and professionel made
Adjustable bench and reverse hypers would interest alot of home gym owner! Liked and subscribed good stuff brother
Yesss it’s a great build! Waiting for more diy building videos! Subscribed !
You did a really good job. Congrats 👏
Wow. So neat and pretty. Works great, apparently. Bravo.
Great work Mr Moss! I share your sense of accomplishment 😁 highly functional machine you've built here. I actually wanted to do the same at one point and had produced very similar drawings but at the time struggled to find the "user interface" piece and how exactly to devise the weight stack. Nor did I have to option weld. Anyway this video should help many others, congratulations! Now just to repeat the process for cable crossovers 😜.
maybe ill do crossovers someday in the future!
Awesome first build.
Very impressive, especially for a first fab project.
Muchas gracias llevo tiempo buscando un video asi de bien explicado y con planos y medidas gracias y exito
Bro absolutely an amazing job!!👍wicked nice
Badass build man. Inspirational.
Also, would love to see how you would go at building a full squat rack with the adjustable cables incorporated!
Awesome build! Very impressive, enjoy!!
This is awesome. I love this man.
Good job
Well done bro..
Love man. If I had a budget I would try and build one but I just said screw it and bought one for $4000 😂. Didn't use a gym membership for 4 years so I guess it paid itself off already 👍
Great job Sir. You are an inspiration.
Great video mate! I know from it being your first video its alot to remember to film everything.. its a pain but it comes more natural over time! If you can come over to the UK build me an Sorinex apex rack that would be great :) haha
Awesome build well done!
So good Thanks
VERY GOOD !
I lovee the video bro!! !nice machine!!+
This is great i like watching diy gym equipment pls do more
That's bad ass. Love to see more. Especially gym equipment.
good job
Nice. I want ro build my own stuff too
THANKS 👍 I WILL DO THE SAME
Great job Bro...👍
Amazing. I was searching for the wiring design. Thanks a lot
this is so cool
Thank you very much for this,great Work 👌💪
holy shit! impressive!
I wanted to build one of these but couldn't sort out building the "user interface" parts. Great video
hardest and most important part for sure!
greetings from Colombia, very good video and the machine too, friend just a small detail, can you give the detailed measurements please,
This is amazing! good job, I really enjoyed watching this
I say make another and put them like 10 feet apart like in tbe gyms so you can do dual chest Flys high medium and low
Not sure if you can slip this in now, but some UHMW tape on the inside of that “user interface” would eliminate the little bit of slop and metal-on-metal wear and tear.
dude great idea! i totally could. thank you
@@solomonmachine2137 I’d be interested to see how you go about building a belt squat setup if you go that direction with your cables. I’m currently trying to figure that out within my own rack by adding a low pulley and extra cable to my existing DIY lat pulldown.
Solid Build, nice job man. thanks for the plans
Incredible job!
Perfect.
GOD DAMN BRO NICE MACHINE 💪
YAAAAAS
soak that plate in evaporust... it will look like a new piece of stock. Or you could just bead blast it once you're done with it...
Great job sir
professional work!!!perfect
Теперь я точно знаю, что буду делать для себя
I hope you build a cable machine and send a picture of it to me!
nice one, pls. make some more equipments 😁
Very nice brother
Can somebody explain in adjustment pulley why rope is not fully tighted or loose rope is always in balance not tight nor loose what is that machenisam
Bro where did you buy the height adjuster where the handles attach to from? I’m desperately looking for a pair
Very nice bro
Hello my friend !
You work it's amazing ! 😍
It really inspire me, i have some technical questions
- What is the distance between the two pulley of the adjustable pulley ?
- What is the thickness of the metal you used for the adjustable pulley tube and the hinge bracket with hole ?
- What is the thickness of the tall tube with holes ? And what is the size of the holes?
Thanks 😊
I just made the two pulleys as close together as I could without touching them.
For the tube, its a standard 1 inch pipe. Which should fit around a 3/4 inch bolt perfectly. And the brackets that mount the bolt, they are 3/8" thick. I just found some metal and cut out bracket shapes and drilled holes and welded them on.
11 GA steel for the perforated square tubing. 1/4 inch thickness for the back and base, and 11GA for everything else.
@@solomonmachine2137
Hello my friend
Thanks you so much for your answer, it help me a lot 😊
I have another question, how did you fix the guiding rode ?
Can you make me some pictures please ?
Thanks again for your help, your last video of the lat pull-down is amazing 👏
Make two, make a bar that connects them and voila, you've got a functional trainer, thousands of dollars saved. Can you elaborate more on the pulley system, where does it start from and where does it stop.
That elaboration is in the video! I explained the cable/pulley system in great detail, give it another watch if you’re interested in making one yourself. Thanks a lot for commenting!😀
What about smith machine?
5:27 how did you made this give us a video of showing each part of this bracket
Now its $1000 for the 250lb weight stack 🥲
Great machine, seems too light for you though
Great job. Maybe not a masterpiece of craftsmanship in terms of detail lol, but you successfully built what you wanted with not much experience. It functions exactly as intended, well done!
I may have missed it somewhere in there, but what was the total build cost?
good afternoon!
Please, I want to know if the metalon you used in this project was 50x50? or is it 20 x 20?
Very, very nice Rogue charges $2300 for that set up
Great💪
I always wondered what the stacks from that website would be like...
Actually very nice. They’ve gone up in price quite a bit since I bought mine. But steel, 6 machined surfaces, beveled edges throughout, and a nice powder coat. You couldn’t make a better stack unless it was chromed out or something
🔥🔥🔥
Hi, what is the size of perforated stainless tubular that you used for the adjustable pulley?
i have question about friction force 2 colume what the desing no friction force
Looks good but how much was the total cost to build?
congratulations beautiful .. you can have the measures, there are no measures in the drawing, thanks a lot........you have other ideas being very good
Did he say what he spent once he finished? I heard the metal price but that was it?
f yeah dude this is what im talkin about
Hey man, just wanted to let you know you that you accidentally doxxed yourself. When you showed the boxes that the weights came in, it says your name and address
HI, why there are no dimensions in the project?
Hey man that build is awesome. I'm trying to find the Guide Rods you are using, looked through amazon for a while and couldn't find the length you've stated. Could you please list the link if possible. I have Rogue uprights and would like to utilize them for the build but the only issue is I'm unable to find the guide rods that would fit. Thanks
yeah it is hard to find good guide rods. My great idea was to use closet rods, the chrome pipe that holds the hangers. However you literally cant find them online in the 1" diameter. The best ones I could find were unpolished, free shipping on amazon:
www.amazon.com/Unpolished-1008-1010-Diameter-Thickness-0-8700/dp/B003TPMM8G?pd_rd_w=jm2NL&pf_rd_p=0d55604f-77be-4514-b038-26b5285c5695&pf_rd_r=VN634VSAYT4WM3D699J7&pd_rd_r=98ad28af-fecb-4e91-a1bd-97ae4e2a96b7&pd_rd_wg=BONhA&pd_rd_i=B003TPMM8G&psc=1&ref_=pd_bap_d_rp_c_2_18_t
This si wonderfull but the way I don't speak English very well but i like yours yob fantastic
Bro, you need to be in business
Hi, I've been designing, fabricating and welding stuff like this for well over 20 years, including my own crossover cable machine, and I'd be impressed if I'd built what you've just done on your first go, so very well done. Do the weight stack weights have any kind of bearing in them against the guide rods, or is it just an air gap? SIimon
can you makie a pec dec fly machine
Thank you, was wondering how the cables worked in these adjustable cable machines, essentially it has to connect in a circle/loop for it to be adjustable. The diagram was a big aha moment. Thanks.
Yeah that’s a perfect way to think about it. It’s a cable circle with a weight stack in the middle weighing it down
Can you purchase the front sliding mechanism with 2 pulleys (from which the cable comes out)