🚀 Keithley 2600A/B起手式 - 10分鐘快速上手攻略 (以K2636B為實作機型) | Quick Start 💨

起手式: Keithley 2600A/B, 10分鐘快速上手攻略
1. 起手式: 開機! [00:00]
2. DUT: 市售100-ohm電阻 + 鱷魚夾 (e.g., Keithley 2600-ALG-2) [00:36]
3. 如何輸出電壓 (Source Voltage), 量測電流 (Measure Current)? [00:48]
4. 如何輸出電流 (Source Current), 量測電壓 (Measure Voltage)? [1:28]
5. 如何直接量測電阻值(Ohm)或是功率(Power)? [02:02]
6. [Mode]: I-Meter? V-Meter? Ohm-Meter? Watt-Meter? [02:33]
7. 什麼是Limit? 為什麼需要設定Limit? 又該如何設定呢? [03:00]
8. 操作小技巧與量測位數顯示? 右上方的3D轉盤? [DIGITS]? [03:25]
9. 與精準度相關的設定與操作: [SPEED]? [REL]? [FILTER]? [04:55]
10. 恢復出廠設定與儀控相關等設定與操作: [MENU]功能介紹 (e.g., RECALL, GPIB, LAN) [07:15]
官網連結: www.tek.com/tw...
#Semiconductor #SourceMeter #SMU #Keithley2600B #DeviceCharacterization #instrumental
---
Quick Start: Keithley 2600A/B, a 10-minute guide to getting started
Getting Started: Power On! [00:00] - This section likely covers how to power on the instrument and perform basic initial setup.
Device Under Test (DUT): Off-the-shelf 100-ohm resistor + Alligator Clips (e.g., Keithley 2600-ALG-2) [00:36] - Introduces the simple test setup using a common resistor and alligator clip leads (possibly Keithley's own accessory).
How to Source Voltage and Measure Current? [00:48] - Explains how to configure the instrument to output a specific voltage and simultaneously measure the resulting current flowing through the resistor.
How to Source Current and Measure Voltage? [1:28] - Covers the opposite scenario: setting a specific current output and measuring the voltage across the resistor.
How to directly measure resistance (Ohms) or power (Watts)? [02:02] - Shows how to use the instrument's built-in functions for direct resistance and power measurements.
[Mode]: I-Meter? V-Meter? Ohm-Meter? Watt-Meter? [02:33] - Likely discusses different measurement modes available on the device, allowing it to function as various types of meters.
What is Limit? Why set a Limit? How to set it? [03:00] - Explains the "Limit" function, which is crucial for safety and preventing damage to the DUT by setting maximum voltage or current values.
Operating tips and measurement digit display? The 3D dial in the upper right corner? [DIGITS]? [03:25] - This section probably covers some useful tips for using the instrument, including how to adjust the measurement display and what the 3D dial does.
Settings and operations related to accuracy: [SPEED]? [REL]? [FILTER]? [04:55] - Delves into more advanced settings that affect measurement accuracy, including measurement speed, relative settings, and filtering options.
Restore factory settings and instrument control settings and operations: [MENU] function introduction (e.g., RECALL, GPIB, LAN) [07:15] - Covers how to access the main menu and use functions like restoring factory defaults, and configuring communication interfaces like GPIB and LAN.
Website Link: This is a link to the official Tektronix/Keithley webpage for the 2600B Series SourceMeter, where users can find more information, datasheets, and support resources.