How to make a bubble wall from the acryl double panel / DIY Bubble Wall
HTML-код
- Опубликовано: 14 окт 2024
- The most important thing about a bubble wall is that it works and that it doesn't leak.
In this video I want to show you how to make a working bubble wall from the acryl double panel. I'll show you a design that I developed myself. Because I have not found comprehensive information on how to make a bubble water panel, and even at home. From the beginning it was clear to me that I would not make a cell plate out of glass myself. The panel must be bought ready-made. There are such. These are cellular panels made of acryl (plexiglass) or polycarbonate. As a rule, the width of the plexiglass plates is 98 cm or 120 cm, the height is practically unlimited. The width of the cells is different, it looks nice, in my opinion, which is the size of 64 mm. Polycarbonate panels have a mesh size of 32 mm, I did not find others.
So, such a sheet is cut off with a length of, for example, 2 meters, and the cut side is glued tightly. The panel will then stand on this side. Rather, it is necessary to first bring an air supply system to the panel and only then glue the open side. And finally, attach the LED lighting around the perimeter. To prevent the panel from falling, it is either tucked into a sturdy base (support frame) or, if the base is small or flat, attached to something convenient that stands next to it, to the wall, ceiling and cabinet, etc.
In the case shown here, the base is quite massive, so I didn't insert the air vents into the edge of the panel cut, but from the side. This makes it easier and there is no competition for space with LED lighting.
Well, then everything can be seen from the video: vinyl tubes are placed on the nozzles, which are connected to a common bus, which in turn is connected to the air pump via the return valve. A clip is placed on the hose of each nozzle, and the pressure of the air flowing in the hose is adjusted by its control. The pump and the lighting are connected to the mains. That's all! The idea seems simple. However, it's not that easy to do. Those who have worked with plexiglass understand me. The material is fragile and requires careful work. But who is not afraid - go on!
#bubblewall #diy #doityourself
Hello from Arizona
This is a absolute beautiful build. I have defiantly subscribed to your channel and I look forward to other videos.
I hope you give a clearer view of how you put together the air flow assembly on your next project.
That is show us how your putting it together.
Again fantastic job
Sieht mega schön aus und inspiriert mich sowas auch zu bauen, vielen ❤️ Dank.
Aber dein Video ware viel besser geworden, wenn du deine Anleitung und Herstellung der Wasserwand direkt eingesprochen hättest.
Danke!
Dios mio cada vez tu saber me asombra mas !! 🎉
Gracias
Great job, It looks very good.
I just got my parts in the post the other day. If you could help out, I have a couple of questions:
1: What type of glue did you use? (epoxy, silica, acrylic cement)?
2. What was the spacing between the 2 main panels ?
3. What is the size of your pump (watts)?
4. How did you cut the thin sections between the main panels, (jigsaw, tablesaw) ?
5. What was the thickness of the polycarbonate sheets (2.5mm) ?
Regards,
Yes, the glue and tools are suitable, the dimensions are given in the description. I will probably make a separate video about this if I see interest from subscribers.
UR VIDEO IS VERY INFORMATIVE....IT WOULD BE GRATEFUL IF YOU MAKE VIDEO HOW YOU MAKE THIS....PLEEZ UPLOAD . WE ARE EAGERLY WAITING FOR IT....
Hola ¿que bomba usarias para una pared de 400x196 cm? Gracias, magnifico vídeo y explicación
Hasta 3 metros de Altura: Shego ws 3
@@aqualdostyle tiene 4 mts de largo por 1,96 de alto ¿cual sería entinces? Gracias
Excelente trabajo. Hace bastante he buscado como realizar este trabajo, pero no hay mucho material.
Encontré todo el material en Internet, en Alemania. Creo que tú también puedes encontrarlo.
como se.llama el panel si me puedes apoyar porfavor
Pueden dar el nombre de los materiales a utilizar que van en las mangueras
After turning it off for, say, 5 hours and restarting the pump, do you also have a problem with not every chamber working? How to solve this problem?. installation of check valves on each chamber?
To solve this problem, each panel chamber is equipped with an air flow regulator.
hi, das sieht klasse aus. eine echte alternative zu einer glaswasserwand. würdest du auch gegen entgeld eine solche wasserwand bauen? elektrik (rgbcct cob oder wled würde ich mit smarten controllern und der elektrik bestimmt hinbekommen. es geht mir primär um die wasserwand selbst nebst luftdüsen
No gasta nada es todo 12 voltios
Спасибо за вашу оценку. Я не делаю панели на заказ, я только показал, как их можно сделать самому
Vielen Dank für Ihre Note. Ich fertige keine Paneele auf Bestellung, ich habe nur gezeigt, wie man sie selbst herstellen kann
i would like to ask about the type and trade name of the diffuser or nozzles you used in this video.
And are there flow changeable?
Many thanks
What air nozzles do I use and how they are mounted are shown in this video ruclips.net/video/u6_3bEf8Mro/видео.html
Can U guide me from where did U buy the panel with these wider cells, as I could not find it anywhere in Toronto Canada. And what is the with of yr cells, please. Thanks Sam.
Polycarbonate amzn.to/3FPLAw4 or plexiglass amzn.to/3PemDyJ panel I find on the Internet on the market in Germany
@@aqualdostyle en México donde puedo conseguir el panel como el que úsate?
@@carmenmontejo8497 Lamentablemente no puedo decirte esto, no vivo en México
hi sir good job!
I just want to know
Where does the drain pipe come from And where is he going please?
The drain will be shown in the next video. In this panel, water is drained through the top or through an air drive disconnected from the pump.
thanks for the quick reply. when the video on drain will be displayed?
tyvm.
I have another question please. Do you need a drain pipe? And if I need drainage, where do I get the drain from and where do I direct it? Explain to me exactly how please. I am in the process of building one like this and have ordered all the required parts
If you need to drain the water from the panel, think for yourself how to do it. I don't have a video on this topic yet. Obviously, you need to drain it to where it was poured from. If you want to save water. Otherwise, you will need to buy a new one. The water must be distilled.
@@aqualdostyle i got you man tnx
Hi hallo
Wie hast du das gemacht das nicht immer das Wasser in die Schläuche zurück laufen tut
amzn.to/31tUOyn
Would you please tell us about the tools you use for the airflow and how you adjust them?
Air regulation is achieved by clamping the air line overlapping the hose
Hey ich würde gern wissen, wo ich Vinylschläuche mit den ganzen Verbindungen zu den Düsen herbekomme. Ich finde überall nur einzelne Schläuche ohne Verbindung.
Lieben Gruß,
Alena 😊
Schläuche 4x6 mm und Schlauchverbindungen in Baumärkten, eBay, usw.
Düse habe ich selbst gebastelt.
Z.B.: www.ebay.de/itm/164490138506?hash=item264c60538a:g:aYcAAOSw~9Bgi9IX
Auf was hast du die Pumpe da gebaut ? Ist das sowas wie ein Dämpfer ?
Schaumstoff unterlegt
Sir which glue use to fix acrylic to acrylic
amzn.to/3NklpQT
Welche Luftpumpe ist das denn? Kannst du mal "zeigen" wie laut die ist?
Sie steht im Video.
hast du irgendwo ein Rückschlagventil eingebaut oder braucht man das nicht?
Auf dem Video ist das Rückschlagventil sichtbar.
Hola, una pregunta, donde compro el panel de plexiglas ?
Busca en tu país amzn.to/3PemDyJ
Hey
Kann man dich irgendwo kontaktieren?
Habe nemlich genau das selbe Projekt vor und habe dazu ein paar Fragen..
lnd.dbrv@gmail.com
hi im interested in how are you sealed bottom of panel?
ruclips.net/video/fygzfy9bFqg/видео.html
Hello, could also please tell us clearly that how did you connect air pump with air hose for each vertical sections ?
This is done using T-piece hose connector. This video shows more clearly how it looks ruclips.net/video/igS4MmbQW-Q/видео.html
@@aqualdostyle Thanks for your reply and link. I have one more question that what type of nozzles did you use or it is just 4mm hose pipe you left inside each sections ?
@@akshaymurteli4473 Nozzles in the form of caps, they are visible in the video
@@aqualdostyle understood the green ones are air controller right if I am not wrong ? And the tip where the bubble get generate is ?
@@akshaymurteli4473 The nozzles are in the water inside the panel. Perhaps I will make a video on this topic.
А каким клеем клеили? Где брали сотовое оргстекло? Из чего форсунки?
Клей силиконовый прозрачный каким клеют аквариумы. Сотовый плексиглас 64 или поликарбонат 32 в торговых строительных центрах, можно найти в интернете. Форсунки из пластика сделал сам, в одном из следующих роликах планирую показать.
@@aqualdostyle спасибо за ответ, маякните пожалуйста как видео будет 🙂
@@Santexnik_Vitebsk Маякнет автоматически, если подпишитесь.
Would you please tell which glue you used for sealing the plexiglass??
silicone glue for aquariums
@@aqualdostyle thankyou👍
@@aqualdostyle will you please name it
ACRIFIX 1S 0116, EGOSILICON 300
Mit was und wie hast du schwarze Verkleidung gebaut ?
Plexiglas Zuschnitte habe gekauft und geklebt
Could you tell me where you bought the acrylic pannel from please?
ebay
@@aqualdostyle if you please give me the link of this product because I didn't find same ... all are narrow not clear enough
@@waleedelgamal Everything is shown on RUclips, there are no other links. If something is not clear, you can watch other videos of the channel.
Did U find any supplier selling wider cells corrugated sheet as I also cannot find one here in Toronto
What is the name of the piece you tuned
What is the name of the air outlet part?
Hola amigo me podrías explicar mejor como hiciste la conexión
Watch my other videos, they show all the connections and the complete panel assembly in detail
Hallo. Ich bin Japaner. Ich war beeindruckt von dem Video, also beschloss ich, es zu machen! Lassen Sie mich Ihnen eine Frage stellen. Wo kann ich Polycarbonat kaufen?
Ich bin in Deutschland und solche Polycarbonatplatten amzn.to/3FPLAw4 oder Plexiglas amzn.to/3PemDyJ findet man problemlos im Internet. Aber wo sie in Japan verkauft werden, weiß ich leider nicht. Versuchen Sie sie zu googeln. Viel Glück!
Danke für die Antwort! Ich werde versuchen, es bei Amazon in Deutschland zu finden. Übrigens, ist die Zellbreite der Polycarbonatplatte im Video 32mm?
@@aqua2700 für Polycarbonatplatte 32mm, für Plexiglasplatte 64mm
in diesem Video wird Plexiglasplatte gezeigt
Nun, es ist sehr hilfreich.
Danke sehr! !!
Donde se consigue el panel ?
Search your country at amzn.to/3PemDyJ
Dónde puedo comprar ese panel y como se llama ese material ?
Láminas acrílicas para paredes múltiples Plexiglas® de 16 mm, transparente, espaciado de 64 mm, sin revestimiento de caída 980 mm x 2000 mm (ancho x profundidad)
amzn.to/3DBc7dE
El panel y la manguera es fácil de conseguir, sin embargo me gustaría saber de los aditamentos que van en las mangueras , que son? Dónde se consigue
El panel y la manguera es fácil de conseguir, sin embargo me gustaría saber de los aditamentos que van en las mangueras , que son? Dónde se consigue
Pero el agua no lleva algo para que no se enlame???
el agua debe ser destilada
Dimana bisa membeli alat pengatur waktu gelembung udaranya?
I didn't understand you, ask in English
@@aqualdostyle where i can buy timer air pump for bubble wall
@@Ray-te9zp I use air pump Shego ws 3. The word "timer" is superfluous here.
Was willst du für so eine wasserwand
Ich verkaufe keine Wasserwände, ich zeige wie man sie selber machen kann
Acrylic sheet kahan per milegi
amzn.to/3PemDyJ
Bn tardes yo fabrique una en vidrio pero le coloque un motor de aire y no era capaz de hacer las burbujas
las burbujas de aire se producen ajustando correctamente las abrazaderas de la línea de aire
а в Ростовской области где нибудь такую штуку продают,вы не в курсе где купить в России вообще??
Я не в курсе. Поэтому показываю, как можно сделать аквапанели самому.
What name plastic?
plexiglass
Welche Pumpe und welchen Schlauch hast du benutzt ?
Schego ws 3, vinyl Schlauch 4/6 mm
Enseñen como se hace!!!
watch my videos
Muy gèntil o nada
Nunca entendí porque los creadores de estos videos nunca responden
¿Cuál es tu pregunta?
@@aqualdostylehola amigo, de principio tu eres un genio, lo haces todo muy explicativo y de ti aprendemos, mí única duda es porque pones tantas válvulas mientras otros solo ponen una manguera? Y mí segunda consulta es saber cómo pedir una bomba de aire para un panel de 1 metro por un metro por 6 milímetros de espesor, agradecería mucho tu respuesta, un abrazo desde Quilmes argentina 🎉
@@JorgeRoberto-h9n Me alegra que te gusten mis vídeos.
A tus preguntas.
1. Por supuesto, puedes introducir aire en todas las celdas a través de un tubo o manguera, y yo también lo hice. Estructuralmente, esto es más simple, pero con este diseño es imposible implementar un control separado de los flujos de aire en diferentes celdas del panel, como se muestra aquí ruclips.net/video/mevTeEtIbRE/видео.html.
Además, si con el tiempo alguna boquilla se obstruye repentinamente, se puede "soplar" dirigiendo el flujo de aire principal hacia ella.
2. Utilizo una bomba de aire "Schego WS3".
@@aqualdostyle muchas gracias querido Bro por tu respuesta, sigue haciendo estas cosas tan lindas 🇦🇷🇦🇷🇦🇷🙏
И как сделать?
Из показанного не ясно? У меня вообще ничего не было, когда я начинал.
Hi
ফোন নাম্বার দেন আমি কাজ করবো
प्लीज आपका नंबर दे
lnd.dbrv@gmail.com