Hello. I found you on Lazada. I am planning to learn Arduino. But I read something in the review about a password some have problems with. Can I ensure you can help me about that before I buy? Hehe.
Hello, Juan! Thanks for the comment! ❤️ The password is for the Fritzing software installer from the seller. And honestly, I didn’t even use it. lol. There are tons of online resources if you want to learn Arduino.
Hi there! Thanks for the comment! ♥ Please make your circuit on this website: www.circuito.io/ Then, download the code. It will be a zipped file/folder names "Firmware". Extract it. Open the "Firmware.ino" and then run your code again and see if it works.
Hello, Nikka! Thanks for the comment! ♥ Please download these files put them inside of your sketch folder. Here's the link: drive.google.com/open?id=1N-SwmFOJYvkfcr_OLhmFGhZYvZgbajfH If you have anymore questions, please don't hesitate to send a message on my fb page. Thanks!
Hello John, and thanks for the comment! You can try other usb ports on your system, restart your PC, use other usb cables, or click view on the Device Manager Then, click on Show Hidden Devices to see if the driver is properly installed. If it has a yellow ish thingy on the icon, try to uninstall it, restart your PC, then reconnect your MCU.
@@HeathenHacks Thank you bro, I am not sure what fix this problem I installed a lot of drivers , and spent whole day in getting started.yesterday the computer cannot detect it , but today I don't know what happen this thing works fine today :D
Why is it that sometimes, it works fine, but when I shut down the computer and turn it on again, the error comes again, now the things that I did to solve is to update the driver again, and again, then restart the computer numerous time, then after that the board will works fine again. every time I shutdown the computer, and then turn it on again, the problem occurs. I am using windows 10. Is this normal?
@@johnjeromeo.colico1259 Hi John, have you tried using other USB cables to connect the arduino? I think you got a faulty one. If the answer is yes, then try connecting your arduino to another computer and see if the problem still exist. If it does, try contacting the person/seller/store you bought it from. And no. I don't think it's normal. I'm also using Windows 10, but I haven't had that problem before.
Alternatively, you can try to adjust the brightness of the LCD by adjusting the potentiometer at the back using a screwdriver if it's lighting up but with no visible text.
Hello. I found you on Lazada. I am planning to learn Arduino. But I read something in the review about a password some have problems with. Can I ensure you can help me about that before I buy? Hehe.
Hello, Juan! Thanks for the comment! ❤️ The password is for the Fritzing software installer from the seller. And honestly, I didn’t even use it. lol. There are tons of online resources if you want to learn Arduino.
Lazada ?
Thanks for the comment! ♥ Yes.
Please help me, when I open the serial monitor it says 'Board at null is not available.
Hi there! Thanks for the comment! ♥ Please make your circuit on this website: www.circuito.io/
Then, download the code. It will be a zipped file/folder names "Firmware". Extract it. Open the "Firmware.ino" and then run your code again and see if it works.
Thanks for the help 👍
Is it working now?
Yes it is
Nice.
sinunod ko yung tutorals sir pero sabi lcd not found , maayosnaman yung wires ko pati pagkakabit kay arduino , paano po kaya mafix un ?
Hello, Nikka! Thanks for the comment! ♥ Please download these files put them inside of your sketch folder.
Here's the link: drive.google.com/open?id=1N-SwmFOJYvkfcr_OLhmFGhZYvZgbajfH
If you have anymore questions, please don't hesitate to send a message on my fb page.
Thanks!
@@HeathenHacks same issue. I have put those files in my sketch folder but proble still persists
@@crease701 Hmmm.. if you can message me on my fb page, I'll try and help you there. RUclips notifications is not that instant. Thanks!
Found the workaround. Yung lcd adress dapat ay 0x27.
link of the shop please
Thanks for the comment! ♥ I'm not affiliated with them in any shape or form, but here's the link: www.lazada.com.ph/shop/v-sy-electronics/
How can I make my arduino work, it cant be detected in device manager
Hello John, and thanks for the comment!
You can try other usb ports on your system, restart your PC, use other usb cables,
or click view on the Device Manager
Then, click on Show Hidden Devices to see if the driver is properly installed.
If it has a yellow ish thingy on the icon, try to uninstall it, restart your PC, then reconnect your MCU.
@@HeathenHacks Thank you bro, I am not sure what fix this problem I installed a lot of drivers , and spent whole day in getting started.yesterday the computer cannot detect it , but today I don't know what happen this thing works fine today :D
Jerome Colico glad to know that it’s working now. 😂. GLHF.
Why is it that sometimes, it works fine, but when I shut down the computer and turn it on again, the error comes again, now the things that I did to solve is to update the driver again, and again, then restart the computer numerous time, then after that the board will works fine again. every time I shutdown the computer, and then turn it on again, the problem occurs. I am using windows 10. Is this normal?
@@johnjeromeo.colico1259 Hi John, have you tried using other USB cables to connect the arduino? I think you got a faulty one. If the answer is yes, then try connecting your arduino to another computer and see if the problem still exist. If it does, try contacting the person/seller/store you bought it from.
And no. I don't think it's normal. I'm also using Windows 10, but I haven't had that problem before.
whats the library?
Hello and thanks for the comment! ♥ I did not use a library for this one. I used the code and C++ file that came from the website that I used.
i follow your tutorial no display on my lcd?can you help me pls
Hi there! Thanks for the comment! ♥ Can you tell me what kind of LCD you are using? This setup is specifically for the ones with an i2C backpack.
Alternatively, you can try to adjust the brightness of the LCD by adjusting the potentiometer at the back using a screwdriver if it's lighting up but with no visible text.
Hello po, i've sent you a message sa facebook account nyo po regarding my problem with the LCD Not Found issue. I hope you can help me with it. Thanks
Hello, Arlene! Thanks for the comment! ❤️
my password ka sa kanilang Download Link for Manual / Tutorial
Better ask them on facebook, sir. I don’t think I have the authority to give passwords. Sorry.
naka bili kasi din ako, kanina pa ako nag ask sa kanila, kanina pang umaga patulong nmn please, pre...