Oh no! Did you get any resin on the inside of the case? This shouldn't happen if it's just on the outside. You can try warming it up a little bit, but once epoxy cures it's usually not going anywhere.
@@promiseepoxy after apply flowers did you top coat them with resin layer and after 2,3 months they will turn yellow or not pls tell my phone cover owner said white cover will turn yellow after 2,3 months ? pls tell m what to do
@@qmresinartandsupplies all epoxy will yellow over time unfortunately. It's one of the annoying truths about the chemical. If you're using a dark case it won't show up, but if you're using a clear case as shown in this video or a lighter case in general, it will amber after 6mo - 1yr. depending on how much sun expose it gets.
For sure! This video shows a cell phone case being decorated with epoxy resin, dried flowers, and a butterfly decal. They are using Promise Table Top Epoxy (it used to be called ProMarine Table Top Epoxy before we rebranded). Check out the video for more details on the exact process.
This is actually a 1:1 table top epoxy. Since this project only needed a thin coat we didn't go with the 2:1. You can learn more about it here if you wish - promiseepoxy.com/tabletop/
Ooo we've never heard of this before! What kind of projects do you normally use this application for? We've heard of salt in epoxy to make it extra glitzy, but never sugar.
Unfortunately we don't sell them, BUT you can make one on your own! You'll want to use a clear phone case, make sure your table is level, and use Table Top Epoxy. Have you used epoxy before?
@@promiseepoxyhi! ive never used epoxy before and dont even know what it is but i want to make a clear phone case. could you explain how to use epoxy or do you have a tutorial or video suggestions?
@@roeboat4679 are you looking to just use epoxy to coat and decorate an already existing phone case? I'd recommend checking out this video to help learn more about our recommended resin for this kind of project - ruclips.net/video/V74JEJdcCw0/видео.html
this is a very cool video! would you make a thorough step by step tutorial on this?
We don't have one currently, but if it's something our audience is interested in we definitely could!
Do you add a layer at the end to cover the flowers?
You totally can!
Resin konsa ration h
Need suggestion- what do if phone cover gets tight after doing this and can not fit in phone ?
Oh no! Did you get any resin on the inside of the case? This shouldn't happen if it's just on the outside. You can try warming it up a little bit, but once epoxy cures it's usually not going anywhere.
Beautiful case but a tutorial would help. Thanks.
Noted! Thanks for the feedback.
Do we pour the resin inside the cover or on top? Silly doubt but yeah :p
We poured it on the outside so the phone will still sit properly in the case!
@@promiseepoxy after apply flowers did you top coat them with resin layer
and after 2,3 months they will turn yellow or not pls tell my phone cover owner said white cover will turn yellow after 2,3 months ? pls tell m what to do
@@qmresinartandsupplies all epoxy will yellow over time unfortunately. It's one of the annoying truths about the chemical. If you're using a dark case it won't show up, but if you're using a clear case as shown in this video or a lighter case in general, it will amber after 6mo - 1yr. depending on how much sun expose it gets.
Butterfly Kahan se order ki hai apne
Amazon!
Does it not peel off the silicone case? I tried uv resin and it peeled off. Tips?
This one didn't, but we used a surface coating UV resistant epoxy, not a UV curing resin.
Did you put resin or glue on the mobile cover?
Epoxy!
How to clean resin when it overflows on sides ? Tia 🙏
You'll want to get the excess with a paper towel and some isopropyl alcohol before it starts to cure.
are those butterfly and flowers made of print paper?
We got them on Amazon! So they might be.
hi! can u pls tell me the product used and how they're used? thx!
For sure! This video shows a cell phone case being decorated with epoxy resin, dried flowers, and a butterfly decal. They are using Promise Table Top Epoxy (it used to be called ProMarine Table Top Epoxy before we rebranded). Check out the video for more details on the exact process.
Resin konsa use Kiya hai aap ne 3:1 ya 2:1
This is actually a 1:1 table top epoxy. Since this project only needed a thin coat we didn't go with the 2:1. You can learn more about it here if you wish - promiseepoxy.com/tabletop/
Can we use sugar + water resin to our phone cover
Ooo we've never heard of this before! What kind of projects do you normally use this application for? We've heard of salt in epoxy to make it extra glitzy, but never sugar.
I want to do this!! Or can I buy one? I’d love to know how u did it.
Unfortunately we don't sell them, BUT you can make one on your own! You'll want to use a clear phone case, make sure your table is level, and use Table Top Epoxy. Have you used epoxy before?
@@promiseepoxyis table top epoxy the same as hard epoxy?
@@arif9770 yes it's a 1:1 mixing ratio 2 part hard epoxy. Gives things a nice hard protecting layer with high gloss.
@@promiseepoxyhi! ive never used epoxy before and dont even know what it is but i want to make a clear phone case. could you explain how to use epoxy or do you have a tutorial or video suggestions?
@@roeboat4679 are you looking to just use epoxy to coat and decorate an already existing phone case? I'd recommend checking out this video to help learn more about our recommended resin for this kind of project - ruclips.net/video/V74JEJdcCw0/видео.html
What is the exact ratio to mixing resin
For the Table Top Epoxy used in this video it's a 1:1 mixing ratio of epoxy to hardener.
@@promiseepoxy thanks 👍
@@deexucollections2620 you're welcome!
My phone case is stuck to my clothes even after pouring resin and using it, why is that, can you tell me the solution
Sounds like you didn’t let it cure fully, or if you didn’t mix it properly it would also cause that problem
Wrong proportion, I think
What type of phone cases are used for making resin phone cases? Can we use silicone phone cases. As far as I know silicone will not stick to the resin
It is just silicone case)
But even wen I tried making on silicon from the side if I liftinv a lil it's completely getting peeled off
❤
කවර් එකක් ගන්න කොහෙද තියෙන්නේ ..
We found this one on Amazon! But you'll want to find one that fits your phone size.