how to draft double breast suit step by step
HTML-код
- Опубликовано: 24 окт 2024
- #suits
MUST WATCH
In today’s video we are doing practical pattern draft of double breast blazer coat / jacket @topts(topstitch tailoring studio)
WHATSAPP: +256707310852
TEL: +256779892259
Using these measurements:
BODY MEASUREMENT NEEDED
COAT FL = 28" ( 71.1 CM )
SHOULDERS = 17" ( 43.18 CM )
CHEST = 39" ( 99.06 CM )
BELLY = 37.5" ( 95.25 CM )
HIPS = 43.5" ( 110.5 CM )
ACROSS BACK = Chest divide by 4 minus 1"
ACROSS FRONT = Chest divide by 4 minus Chest divide by 48
NECK = ????
SLLEV LENGTH = 24" ( 60.96 CM)
CUFF / WRIST = ????
of this table that we used in our
Previously sleeve coat theory calculation tutorials
Below is a standard denomination table:
ANY BODY MEASUREMENT
DIVIDE BY ÷ 48
÷ 24
÷16
÷12
÷ 8
÷ 6
÷ 4
÷ 2
NOTE: APPLY THEM WHERE NECESSARY
Other requirements that are needed when drafting any pattern for this project I will need:
A note book
Drawing rulers preferably fashion rulers
You will also need a tracing wheel
Paper scissors
Tape measure and
Different color marker pens etc
So ladies and gentlemen
Guide 2
When drafting a blazer coat pattern you have to draw one vertical straight line and 7 horizontal lines which are distanced and placed vertically from each other using the body calculations as you will be seeing in this video.
To elaborate them better I will be marking and labeling these 7 lines alphabetically.
Please if this video tutorial has been helpful to you Guys I real need your support to help this channel grow to 100 million subscribers by liking, sharing this video, and leave a comment on anything you did not understand in the drafting part I would wish to read your comments and give you back the replies and don’t forget to subscribe to this channel for more future video of the same.
GOD BLESS YOU ALL SHALLOM
#Sewingforbeginners
#patterndraftingforbeginners
#patternmakingtutorial
#femaleshirtcuttingandstitching
I love the manner by which you break everything down with the formulas. Very important
Thnx dear am humbled. But long time and regards
I spend most of my time making leather garments you're very good at explaining what you do making patterns for suits and doing different lapels and also doing the lapels without talking about the whole there's other ways to make lapels like seeing people who are Innovative and show different techniques thank you
Thanks you so much for encouraging and advice may Almighty bless you.
PLEASE GIVE US AS SUCH DETAILED DESCRIPTION FOR THE SUIT SLEEVE.
Thxs a lot for the illustration but explain those constants how they are came up with
Next video I will.
Keep up the good work. I love the manner in which you apply all the formula in all the areas. This very important and interesting
Thanks for appreciating
Awesome video my friend! So happy I found it! Thank you veru much!!!
Thanks for appreciating. Regards from Uganda🇺🇬
Sooo detailled can wait to try. Be blessed !!!
Much appreciated regards
Am new subscriber and I haven't watched the video but seeing all the good comments I was moved and that's shows you are the best among the best
Thnx dear for appreciating much regards
This was so so helpful. I'm making my first suit. Please continue doing such good work
Thank you! Will do! Regards
Olá boa noite tudo bem! gosto muito da tua explicação uma aula excelente esta de parabens
Wonderful my dear and thanks for appreciating
This is a very deep tutorial. Thanks so much
Amen and thnx for appreciating much love from Uganda🇺🇬
It's really professional the lecture is educative but please give more light on the constant figures how you come about with them as ere applied thanks
Thanks for appreciating regards. For figures research if the best weapon to explore things
Sou Brasileiro e comecei a te seguir
Oh my God thanks for the support. Much regards from Uganda🇺🇬
Very inspiring and educative thanks God bless you
Thanks dear
its fully detailed enjoy and learn how to make yours today. for inquiries check the description box for contacts
Best suit tutorial....much love from Uganda 🇺🇬
Thnx bro for appreciating regards from Uganda 🇺🇬
I'm very glad to following you
Wonderful dear thanks for watching and learning
you are just too much, i really enjoyed the video, appreciate you so much
Thank you so much my dear much regards
Good explanation how to cut on Fabric the paper drafting
Kindly reach me in my WhatsApp +256779892259 I see how I can help you in details. Thank for learning.
What does the importance of back and front sum of dungaris tell
Please sir your watsapp no and insta I'd I have to do you photo whatsapp
Hey the CEO himself all the way from Kachumbala now to expressway, big up my bro i always enjoy your suit cutting tutorial, this one is not exception. It goes with fun for me. Please, I humbly request that you do the sewing tutorial for this. Am looking forward to seeing it in anticipation. Remain blessed for the good work. Regards to your family especially mr. Deworming all the way from Nakaloke, Kachumbala..................................
Keep up the good work bro!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thnx for appreciating blood. I will do the sewing once I return to TOPTS workshop. Regards from 🇺🇬
Greatly explanation ❤
This is well explained and useful to me ❤
Thanks for applause. Regards
Back neck width 3.25" ( 8.25 cm) good 👍
I always enjoy your suit cutting tutorial, this one is not exception. It goes with fun for me. Please, I humbly request that you do the sewing tutorial for this. Am looking forward to seeing it in anticipation. Remain blessed for the good work. Regards to your family
Thank you so much for appreciating much regards from 🇺🇬 me. Your right 100% Indeed sewing tutorials are needed but I do apologize currently am unable but soon I will be traveling back to where my tailoring workshop is and I will work tirelessly to full fill your honourable request. Regards once again.
Good work sir. Can you please post measurement video?
Will upload soon bro, thanks for watching and regards from Uganda 🇺🇬
Sir your all Explain very very best
My boss thank you so much for appreciating. And if you are in Indian allow me say Namaste to u
Yes sir ❤️❤️❤️❤️
This is professional .
What type of drafting pattern are u using.
Better learning from you sir,,thanks
Wonderful thanks for appreciating much regards
Round chest 39 inches Divided by 12 chest 39" ÷ 12 = 3.25 (8.25 cm) Back neck good explanation I understood . But please 🙏 make me understand 1.625 thank you😢
Ok 1" Then 0.625 convert it into cm (1.5 cm)
1" = 2.54cm So 0.625x2.54= 1.58cm you ignore 8 to make 1.5cm or round up 8 to make 1.6cm
In this cut that you made,the small seam of stein is placed at the side seam
Yes
I enjoy your lecture, please at the back arm whole, you don't give it any curve
Yes dear you can curve it slightly not too much or u you leave it as long as you have taken the measurements correctly. Regards and thanks for contacting TOPTS TAILORING STUDIO.
Wel explain sir God 🙏 bless you
Thank so much my dear. Plenty of regards
Hi Master I Glad To Show your vedio but My question Why you don't bk body armhole Shap ---
Thanks for contacting Topts tailoring. Please I do request to resend your question because am not understanding the first one. Or WhatsApp me on +256707310852
Sir aap iski stitching or bataiye pliz sewing easy mathord full vedio
Ok
HELLO I AM GULZAR from India in delhi I am a cutting master but i want to learn a heavy size coat cutting make this video . My client measurement is chest 43,Belly 47,hip 42,shoulder 19,sleeve 26 and length 31
Thanks for your request I will also have this kind of request from another subscriber. I promise I will my dear
Sir thank but i need you to explain about diveded of 48,24,16,8 ,4,2 slow but slow
Thnx for your inquiry please.
The division ➗ of:
48, 24, 16, 12, 8, 6, 4, 3, 2 , those are standard division jargons that u a pattern maker or tailors can use. It's like any other divisions. I hope you always divide your chest measurements by 4 for shirts, thigh by 2 for trousers etc so still use 48, 24, 16, 12, 8, 6, 4, 3, 2, applicably.
🙏🏽🙏🏽🙏🏽🙏🏽 sir help me please Cover all pattern full tutorial I need to your help
Yes please I haven't understood your request please kindly details me so that I can help. ( Cover all pattern full tutorial on........) Regards 🇺🇬
Sir plz drafing single Brest for 28lenght 40chest 42waist 41hip and 18 shoulder plzzzzz
Yes dear I have received your requests and it my que I will work on it I promise. Just subscribe and turn on the notification bell so that you will be notified when the video is uploaded. Thnx and regards 🇺🇬
Thank you bro ! ❤
Thanks for appreciating regards 🇺🇬
Above back neck width upward 0.8125" (2 cm) 2cm I understood but on measuring tape to mark in inches 0.8125" Please 🙏 explain need your help brother Thank you
Convert 0.8125" Into cm. 1" = 2.54 cm. Now get 0.8125x 2.54= 2cm
If have have tape measure that counts upto 10th it's ok but this normal ones its hard u just need to improvise a centimeter ruler.
I love your videos
Thank for loving my videos cheers
I love your video
Wonderful thnx for the love dear keep it up
Please explain it to me Thank you God 🙌 bless you and your family
Ok 1" Then 0.625 convert it into cm (1.5 cm)
1" = 2.54cm So 0.625x2.54= 1.58cm you ignore 8 to make 1.5cm or round up 8 to make 1.6cm
Thanks for building the nation glory to God long live bro
Thanks dear be blessed too
Sir, why don't you complete the pattern in only one tutorial video? And there's no sleeve pattern included in this. Thank you.
Watch full video:
HOW TO MAKE COAT SLEEVES #topts👇👇👇👇👇👇👇👇👍
ruclips.net/video/W8_yrbwVQtA/видео.html
And thanks for that observation but if I join this video tutorial together it will be too long so I try to shorten by separating.
And now due to your lovely comment indeed I will adjust so that everything is covered in one tutorial. Much greetings from Uganda 🇺🇬
I'm proud with you
Thanks dear regards from Uganda 🇺🇬
The only place I don't is the measurements of the chest region around the side pattern part of the suit
U mean your not understanding that. There's a video premiering soon I will elaborate more on that part for u.
thank you sir
Thanks for appreciating regards from Uganda 🇺🇬
Great tutorial...please do drafting for ladies blazer
@caroline Thnx for appreciating regards 🇺🇬 Your request is of a value and too helpful to any designer so dear I will do as per your request I promise. Just subribe and turn on the notification bell.
Great suggestion!
your request: how to draft female blazer jacket /chest size 36/topts tailoring studio
ruclips.net/video/36djXpTykVI/видео.html
My question is also on that denominations
Kindly more light on your question
Thank you so much
You're most welcome
Nice job
Thanks regards
i like this process of drafting double breast suit.
Wonderful thanks for appreciating regards
Where is 24 coming from?
Yes dear thanks for your observation of """"" 24" """" But I can't understand this 24 try to highlight it. Regards
Like 1.625 (4.1cm) can you 🙏 please make me understand
To avoid loosing much. First measure 1 inch which is complete then the other dimensions you can use unit converter to to change into cm which will be 1inch and 1.5 cm. Hope this helps you dear.
Hello brother how to measure 1.625
Ok 1" Then 0.625 convert it into cm (1.5 cm)
1" = 2.54cm So 0.625x2.54= 1.58cm you ignore 8 to make 1.5cm or round up 8 to make 1.6cm
Thaks
Regards
Pattern making bookand it sewing steps
Inbox your number on WhatsApp +256779892259
You convince me by making her methed and plase chart
I am from indonesia
Thanks dear all the way from Indonesia thanks for supporting TOPTS TAILORING studio. Regards and much love from Uganda 🇺🇬
@@ToptsTailoringStudioAfricaTeso love you too
@@ToptsTailoringStudioAfricaTeso well come
❤❤❤❤
🙏👍
Please sir help me
Let's chat on Whatsapp: +256707310852 so that I can know how I can help you
Plz do drafing for 40chest 42 belly
What about the hips and full length send me all your body measurements
@@ToptsTailoringStudioAfricaTeso sir my full length is 28 sleve23 che40 ws42, hip41and shulder are18 plz sir guide me
Sir my length is28 chest40 waist42 shoulder 18 hip41 sir plz drafing single Brest
Sir plz drafing single Brest for 28lenght 40chet 42waist 41hip and 18sholder plzzzzzz
ACTUALY YOUR PROGRESSION IS SOMEWHAT INTERESTING AND .....BUT .I AM IRRITATED WASTING MY TIME ,THE FINAL SHAPE OF THE PATTERN LOOKS NOT FANTASTIC AT ALL ANY WHAT I LOVE IT...........GO ON
Thanks for the uplause though I haven't understood your last statement. Regards
Plase insta I'd
Text me on my Whatsapp so that we can voice and Text chat chat. +256707310852