I ordered MS260 AM clutch springs because of this video, I’m in MN so I usually buy from Sawagain. Can’t wait to get them. Thank you, I am a throttle blipper.
Just to report back, the clutch spring tip is fantastic and I am absolutely loving it. Coupled with a high speed adjustable carb and heavy muffler mod I am a throttle blipping limb thrashing animal.
I love my stihl saws. My little ms250 cuts the bulk of my firewood without ever giving me trouble. My saws are all stock,other than muffler mods and cut several cord of oak and maple every year. I've been thinkin of buying a ms400c or ms462 to replace my aging ms441c, but every time getting to thinkin about it I just cant justify the cost.
I had the exact same experience with a Red Barn piston for an Echo 351VL resto job I did recently. The fit was no where near what the oem unit was and I did not care for the casting job on the underside. Drop it down into the bore on the bench with no rings, and the thing fell like a rock. I did the same thing with the oem piston and it built up compression after it passed the exhaust port. The Red piston was a rattler compared to the (used) oem part.
BE THANKFUL FOR WHAT YOU HAVE WHO CARES ABOUT VIEWS AS LONG AS YOU'RE HAVING FUN MAKING THE VIDEOS THAT'S ALL I CARE ABOUT YOU HAVE WAY MORE OF A FOLLOWING THAN I DO I HAVE LIKE 20 SUBSCRIBERS THAT'S NOT MY POINT I LOVE TO MAKE THE VIDEOS THAT'S THE POINT!
@@CharlesBrisco I ordered a cross proformance pop up for a ms390 and wasn't happy with it at all, just like yours very heavy bad timing and very soft . And where the piston was notched out for the transfers it was too narrow . Just wast very happy about it
Charles - I'm trying to get ahold of Indy Doug - and wonder if you could pass info to him directlynor throufh Killinger when your "Live in tbe Comments" at the same time as me. I can "comment" my e-mail addy, then delete my comment once you have it. I really think the way yoir doing your channel is great, Charles! WELL DONE!
There must be something wrong with the web bots that run youtube analytics because ether I look like Brad Pitt or Johnny Depp because in the gender section of my studio app it says 70.0 women and 29.9 Men . Hope that true he he he peace
Charles, I looked for it in the vids but couldn't find... What did you set the Transfers at? Farmertec cylinder I have is timing at Intake 84 exhaust 98 Transfers 129....I plan to raise 5 degrees to 124 and maybe even higher to 120 after testing. Just wondering where u set yours
![YoungBoy Never Broke Again - Missing Everything [Official Video]](http://i.ytimg.com/vi/dTYeMZGzOzw/mqdefault.jpg)
I ordered MS260 AM clutch springs because of this video, I’m in MN so I usually buy from Sawagain. Can’t wait to get them. Thank you, I am a throttle blipper.
Just to report back, the clutch spring tip is fantastic and I am absolutely loving it. Coupled with a high speed adjustable carb and heavy muffler mod I am a throttle blipping limb thrashing animal.
Thanks for the update. All goods things to hear.
Always watching and giving a thumbs up, don’t always comment. Appreciate all the info you share always! Thanks
This lil saw has amazed me an how stout this lil booger is. Great work sir!!
You have my appreciation keep up the good work much respect for your efforts and your honesty thank you
I love my stihl saws. My little ms250 cuts the bulk of my firewood without ever giving me trouble. My saws are all stock,other than muffler mods and cut several cord of oak and maple every year. I've been thinkin of buying a ms400c or ms462 to replace my aging ms441c, but every time getting to thinkin about it I just cant justify the cost.
Thanks for the update, wait until you hit a million subs
Stinking awesome man! I hope you just keep growing!
I had the exact same experience with a Red Barn piston for an Echo 351VL resto job I did recently. The fit was no where near what the oem unit was and I did not care for the casting job on the underside. Drop it down into the bore on the bench with no rings, and the thing fell like a rock. I did the same thing with the oem piston and it built up compression after it passed the exhaust port. The Red piston was a rattler compared to the (used) oem part.
Nice little hot rod! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
turned out nice
BE THANKFUL FOR WHAT YOU HAVE WHO CARES ABOUT VIEWS AS LONG AS YOU'RE HAVING FUN MAKING THE VIDEOS THAT'S ALL I CARE ABOUT YOU HAVE WAY MORE OF A FOLLOWING THAN I DO I HAVE LIKE 20 SUBSCRIBERS THAT'S NOT MY POINT I LOVE TO MAKE THE VIDEOS THAT'S THE POINT!
Wow..
My dream chainsaw 🙂❤️
What was your final numbers you guess our numbers you would recommend for a ms250
I have an 023 can I put a ms250 cylinder on it?
What carburetor did you use?
Brisco, do you need anything for the ms260 build yet
I'm not shure yet I'll no more when I tear into it
@@CharlesBrisco k I may have spare parts have to check what I got if you needed something
👍
Was that a cross proformance piston from red barn?
It was a red barn not shure if it was a cross tho
@@CharlesBrisco I ordered a cross proformance pop up for a ms390 and wasn't happy with it at all, just like yours very heavy bad timing and very soft . And where the piston was notched out for the transfers it was too narrow . Just wast very happy about it
Charles - I'm trying to get ahold of Indy Doug - and wonder if you could pass info to him directlynor throufh Killinger when your "Live in tbe Comments" at the same time as me.
I can "comment" my e-mail addy, then delete my comment once you have it.
I really think the way yoir doing your channel is great, Charles! WELL DONE!
Does a 170 cover need modification to change out the stupid flip cap I have on my ms250c?
Can I have Indy manage my life, because I don't have a RUclips channel?
Anytime buddy👍🏻
@@IndianaDoug SAW-WEET!!! Think I'm gonna go play the lottery, because it must be my lucky day.
@@jerseyjoshua4818 🤣🤣🤣
There must be something wrong with the web bots that run youtube analytics because ether I look like Brad Pitt or Johnny Depp because in the gender section of my studio app it says 70.0 women and 29.9 Men . Hope that true he he he peace
Charles, I looked for it in the vids but couldn't find... What did you set the Transfers at?
Farmertec cylinder I have is timing at Intake 84 exhaust 98 Transfers 129....I plan to raise 5 degrees to 124 and maybe even higher to 120 after testing. Just wondering where u set yours
660 seem to run good 124 to120 for me at least