@@excellentideasineducation Please explain in siemens contour turning programming classes. It's too difficult to me. Please explain these model programme in siemens
Your second z.value is -7.93 or -7.94 if you round it off. From diameter 16 to diameter 30 at radius 8 ,will not blend smoothly. .that's what I was saying. We may get away with it as the difference will be 0.06 in radius or 0.12 in diameter.
it would not be a good idea to use it directly on the CNC m/c, in this program multiple passes are required to execute this design without damaging the tool.
By default diameter is set in CNC. So that we took the diameters (16,30,40) instead of (8,15,20). If we sets 16,30,40 mm deflection in x-axis,the actual deflection goes to 8,15,20 mm in x-axis.
how to calculate r2 z-1 and r18 z-10 without knowing the starting point on x?? (r2 and r18 are on the same piece and are consecutive one after the other)
Wow wow...brilliant ...! past so many years of doubt it's clear in matter of seconds
Thank you
Your calculation of z value from diameter 16 to diameter 32 is wrong. Fix the error please.i however enjoy watching your videos too.
I don't understand your question.
I like your explanation.
I give you 👍
Thanks you
❤excellent 👌 does this program works for any turning machine??
upload more cnc Turning videos .please
Sure...I will upload soon
@ waiting🤩
Useful video for me ..I learnt how to write program thank you
Thank you.
@@excellentideasineducation Please explain in siemens contour turning programming classes.
It's too difficult to me.
Please explain these model programme in siemens
Nice mam. Simple and easy program.
Thank you
Nice madam.........Plz show full rough turn also.....This was easy single tool pass.....
Your second z.value is -7.93 or -7.94 if you round it off. From diameter 16 to diameter 30 at radius 8 ,will not blend smoothly. .that's what I was saying. We may get away with it as the difference will be 0.06 in radius or 0.12 in diameter.
Would this still work if you were programming it directly into the CNC or do you need the CAD CAM software?
This program works directly in CNC.No need to go for CAD CAM software.
it would not be a good idea to use it directly on the CNC m/c, in this program multiple passes are required to execute this design without damaging the tool.
Thanks 👍
Welcome
Please send cnc traini software in discription madam
Right now I don't have CNC software. I will check and let u know.
Nice
Madam we taken absolute at the center(0,0) means the cutter start at the center , why we used diameters (16,30 ,40) instead of radius (8,15,20)?
help
By default diameter is set in CNC. So that we took the diameters (16,30,40) instead of (8,15,20).
If we sets 16,30,40 mm deflection in x-axis,the actual deflection goes to 8,15,20 mm in x-axis.
@@excellentideasineducation its depend on cnc parameter setting
Nice explain thanks it will help alot
Thank u and keep watching.
Shouldn't x value be 32 after radius? 16 + 8r + 8r = 32 ...?
X value should be 30 only.Pls draw the drawing as per dimensions & check X-axis value.The dimension mentioned in the program was correct.
how to calculate r2 z-1 and r18 z-10 without knowing the starting point on x??
(r2 and r18 are on the same piece and are consecutive one after the other)
CNC turning program software ha Aap ko pas link send kar do please
Mam thank you so much.. I can easily understanding the program mam 🙏🙏
Welcome
@@excellentideasineducation RUclips guys are not mentioning the raw material details in siemensradius 8 is not possible.
Please try it in siemens.
In redius 8 turning to take 32 not 30 because in x axis the dimension is double
Draw the drawing as per dimensions & check x-axis value.The dimension mentioned in the program was correct.
Can we start the program at N01 there's any problem mam
Yes,we can start at N01,N02,N03...goes on
Mam is it is incremental method
It is absolute method (G90)
Thanks madam
After z45 in this diagram taper is there so which code put on it
@excellentideasineducation there is taper....can you check this
In coordinat 3-4 point mam u can check it
mamm z10 r 8 it is possible ....?
Yes..it's possible
Madam, From which book question is taken ?
From Engineering CAD/CAM
I have doubt ma'am. Why don't you take zero return?
Are u asking before end of the program?
N22 z-68 only requred becouse N21 X40 is there
G71 and G70 FTW!!
Coordinates (0,0)
We goiing upper side than coordinates (8,0) but u write 16,0
If we set (16,0) coordinate in x-axis,the actual coordinate goes to (8,0) in x-axis.It depends on CNC parameter settings.
N15 crash machine madam
Lekin uhapar 7ka redis lagaya medm 8 ka nahi
Aaj uchi rkho
Hello, I'm a beginner, can you please leave your email for me to send you some shaft to help me out with the codes?
excellentideasineducation@gmail.com
Helo
Hi
Mem Hindi me bataiye na apni Matt bhasa me