Solo quería agradecerte tu ayuda y colaboración prestada. Me han sido muy útiles a la hora de pasar mis exámenes. Un abrazo grande y dentro de poco a CCNA3
Man I mean damn fckng loving ur channel, and Im actually learning more from you than my CCNA classes, thx a lot, you should make videos 'bout theacinhg the entire CCNA bro, i really know you and your channel will grow bigger and bigger, you really rock dude, greetings from Peru!
Hi Christian, can you try and add a wireless router to the Town office Lan that has a laptop and mobile device connected to it and connect that to the Lan and configure it please, devices have to receive DHCP addresses?
Part 2, step2 , in the "ip dhcp excluded address " command , please tell me why you've used 192.168.10.254 as a "management ad of wlc " instead of .100.254 as it montionned in the table.i really dont know why did this ??
WLC controller in this case is managing more than one VLAN, for VLAN 10 uses ip address 192.168.10.254 according addressing table, but for other VLANs will use another IP address, for management VLAN is 192.168.100.254
I am not understanding one thing, that is can kindly explain when you Configure IPv4 and IPv6 host routes on R-1-A to the Server O-S-10 on the Town Office LAN you put the subnet mask for ipv4 is 255.255.255.255 and for ipv6 you used prefix /128,,,, but why? i am getting confused because used ipv4 address is an IP of /24 network, and ipv6 is of /64,,,, this matter is unclear to me, please my cordial request to explain,,
Hello! On Part 3, Step 1/c it says Town Office LAN WLAN but you routed the ipv4 address of Village Branch 192.168.10.0/24 Shouldn't it be 192.168.3.0/24 as it is on the scheme on Town Office LAN???
yes, but the instruction is incorrect, "Town" does not have a WLAN, and the only on WLAN is 192.168.10.0, the next step will create the static routes to "Town"
Thanks man, very helpful. For some reason, at the very end when entering on Laptop LT1, it would never connect, there were no wireless networks avaialble, and the default network only appeared after the one we created, but again, it would never connect to either of them. . Also, almost all the "Configure IPv6 static host routes" were incorrect. Maybe I missed a step there. I got 78%. Anyways, thanks again for the video
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Viejo, no tengo palabra como agradecerte. Gracias por tomar el tiempo y permitir que aprendamos contigo. Saludos desde NYC
Saludos desde Perú, gracias por tu comentario, mi objetivo fue justo lo que describiste.
instaBlaster
Solo quería agradecerte tu ayuda y colaboración prestada. Me han sido muy útiles a la hora de pasar mis exámenes. Un abrazo grande y dentro de poco a CCNA3
Muchas gracias por todo tu apoyo, lo aprecio mucho, no te detengas
Many Thanks very good lab
We really learn a lot with you
Many Thanks
Regards
I appreciate all your support my friend, nice to meet you
Tyvm man, I learned more from you in 1 hour than from the netacad in a week
Thank you for all your support, you are helping me to continue with this for long time
Muchas gracias por tu apoyo, amigo. ¡Saludos desde CDMX!
Saludos cordiales, dónde es CDMX? algún lugar de México?
@@romeroc24 en efecto, es la abreviatura de Ciudad de México.
Gracias!!! lo aprecio mucho
Man I mean damn fckng loving ur channel, and Im actually learning more from you than my CCNA classes, thx a lot, you should make videos 'bout theacinhg the entire CCNA bro, i really know you and your channel will grow bigger and bigger, you really rock dude, greetings from Peru!
Thank you for all your support I really appreciate, gracias por ver estos videos compatriota!
muy agradecido por la práctica.!
Gracias por todo tu apoyo
Thank you very much, I got 100% ,😁❤️+ I learned from you
Great job! Thank you
Gracias bro muy buen vídeo, god bless you
GRacias por todo tu apoyo
les aparece el ssid al ingresar con el perfil, work net ?, eso ya me paso en anteriores practicas que no me apracia el ssid.
can you help me int the final question : the LT-1 laptop is not connected wwhat should i do ?
you need to configure the WLC, if something is missing on the WLC configuration, laptop will not connect
eres el mejor broder
aprecio tu comentario
Hi Christian, can you try and add a wireless router to the Town office Lan that has a laptop and mobile device connected to it and connect that to the Lan and configure it please, devices have to receive DHCP addresses?
you need to add a Access Point the configure with SSID and Security, or maybe you have more specifications
@@romeroc24 I need to add a wireless router, hosts connect to it get a dhcp addresses but become part of the full LAN.
I tried making the router an AP, bridge etc but still can't ping other LAN's
@@abbasleaders5214 send me your file using social media shown in 00:03
@@romeroc24 I will try uploading it to Facebook later on today. Thanks a million for your help
Disculpa como podria contactarte.
las redes sociales se muestran en 00:03
Part 2, step2 , in the "ip dhcp excluded address " command , please tell me why you've used 192.168.10.254 as a "management ad of wlc " instead of .100.254 as it montionned in the table.i really dont know why did this ??
WLC controller in this case is managing more than one VLAN, for VLAN 10 uses ip address 192.168.10.254 according addressing table, but for other VLANs will use another IP address, for management VLAN is 192.168.100.254
@@romeroc24 thanx a lot 🙏🙏🙏 for your reply .but i still dont understand😣 .pleaaz can you explain it more ?
@@norwaytoronto6601 this video will explain all ruclips.net/video/bN8Rh6-QjEY/видео.html
Very good
Thank you
I am not understanding one thing, that is can kindly explain when you Configure IPv4 and IPv6 host routes on R-1-A to the Server O-S-10 on the Town Office LAN you put the subnet mask for ipv4 is 255.255.255.255 and for ipv6 you used prefix /128,,,, but why? i am getting confused because used ipv4 address is an IP of /24 network, and ipv6 is of /64,,,, this matter is unclear to me, please my cordial request to explain,,
mask 255.255.255.255 defines the host and for ipv6 /128 defines the host, /24 defines the network and /64 the network of subnet
@@romeroc24 understood,,thanks a lot,
No estara en español ? Por favoooor !
No lo tengo por ahora, puedes usar los subtítulos traducidos automáticamente
Hello!
On Part 3, Step 1/c it says Town Office LAN WLAN but you routed the ipv4 address of Village Branch 192.168.10.0/24
Shouldn't it be 192.168.3.0/24 as it is on the scheme on Town Office LAN???
yes, but the instruction is incorrect, "Town" does not have a WLAN, and the only on WLAN is 192.168.10.0, the next step will create the static routes to "Town"
Thanks man, very helpful. For some reason, at the very end when entering on Laptop LT1, it would never connect, there were no wireless networks avaialble, and the default network only appeared after the one we created, but again, it would never connect to either of them. . Also, almost all the "Configure IPv6 static host routes" were incorrect. Maybe I missed a step there. I got 78%. Anyways, thanks again for the video
Hello, maybe the problem is a incorrect ip address on the static routes, thank you for all your support
Hola buenas, tiene este video en castellano? Gracias
Lo siento, no lo tengo es español o castellano
Good video👌🏻
Thanks 😁 I appreciate
Gracias carnal me salvaste la vida :/
Aprecio tu comentario, gracias
Thank you for this video. Is the result 100 or less than 100%
hello, more than 92%
@@romeroc24 thanks so much 💛💛
can I have your Email sir
I have a new question
You can contact me using social networks shown in 00:03
Saque 74 :v
Con este video se puede obtener más de 90