Just throwing this idea out there. I think you should do a giveaway with Larry after you get it completed! 🤷🏽♂️ 25-50 dollar mystery boxes one box has the keys. That would be pretty cool.
Larry looks sick! Definitely 2inch spacer in rear and swap the grill and front bumper from Big Red. Then 37 Grapps on 03 f150 FX4 stocks, or 24x14's on 35's!
L…A…R…R…Y…!!! He looks absolutely incredible, been a long time and I’m so glad Larry finally has his lift! I say 37s with a 10-12 wide at max but I would love any old school look as you mentioned!! Keep up the amazing work!👍
Recently just bought a 2005 crew cab Silverado with a 5.3 in it and I love to see chomper content gonna have to go back and look at what u did love the videos keep it up
16:43 could be camera angle but it kinda looks like the rear axle ain’t centered in the opening just figured id mention it bc it could cause issues when you go to a big boy tire. I know some lift blocks have off center alignment pins. Larry looks dope btw keep ‘em coming.
I say do an old school style look. I think all the options you said would be sick. But I think some 16x12 or 16x14 or even a 16x10 and go really big on tires would look sick
Okay this re earned my sub. I refused to be following a squat queen. Lifted Tahoes a rough one but atleast it’s not a massive lift on dumbass big wheels
For future reference it’s a lot easier to lift the truck from the rear diff, undo the u-bolts then take two pieces of wood (like the one you stacked on the jack but bigger) and put them under the leaf springs on each side of the wheel hub then lower the truck onto those blocks it will then separate the space you need to remove the old block and replace with new one then Jack the axle back up to put ubolts back in. ALWAYS jack the truck from the rear diff when changing blocks and do one side at a time it will avoid messing up rear alignment.
The inner wheel seal behind the inner wheel bearing should be a press fit into the rotor/hub assembly. I don’t know why yours seems loose and staying with spindle unless it’s the wrong seal for the rotors/model you have. It should have to be pressed or tapped into place on the back of the rotor with a seal driver and hammer, retaining the inner wheel bearing too.
16s and 38" mud grapplers on old Larry! Keep it classic with the late 90s early 2000s.
Yea that’s the only way to go hope he does that
I agree!
And not that gangster shit
Time to put some 37 mud grapps on it now
38x15.50 graps!!
Only on 24 foes 😂
Hell no he already did mud grapplers you idiots
38x15.50
Nah wides
Definitely should do the bullet holes and mud graps bc they go so well with the look of the 10th gens
Love the idea of 37s and bulletholes
Larry lookin hard!!!
35x14.50 Boggers on 15x12 bullet holes.👌
Bud loving the content, putting out bangers.i think 37s and 12 wides would look🔥
Larry looks good
The way he is doing the truck make it look so hard
I think 37’s on 24x14’s would look nice. Nothing crazy but also kinda crazy at the same time.
That’s what I was gonna say cause 35s even with offset is way to small
24's? them some blackie rims lol not enough tire
“Nothing crazy”
24x14 chrome wheels with 37 inch tires would be the perfect setup
Just throwing this idea out there. I think you should do a giveaway with Larry after you get it completed! 🤷🏽♂️ 25-50 dollar mystery boxes one box has the keys. That would be pretty cool.
loving the squat
Larry looks sick! Definitely 2inch spacer in rear and swap the grill and front bumper from Big Red. Then 37 Grapps on 03 f150 FX4 stocks, or 24x14's on 35's!
Gotta find a set of 16.5x14 welds with 35x16 boggers
I am agreeing with you I wanna see that old Larry look with the bullet holes and mud graps.
it looks so good love the vids man.If nothin else you’re getting to know the front end of the truck super well 😂
The squat looked so good though 😢
39.5 swampers on some old school wide welds would be 🔥
Chase you should put those stocks back on Larry for a video it looks cleannnn.
Think it would look pretty good with the Mickey Thompson classic 3’s 16x12 with a decent 35 or 37 mud grip. It would have a good old school look.
L…A…R…R…Y…!!!
He looks absolutely incredible, been a long time and I’m so glad Larry finally has his lift!
I say 37s with a 10-12 wide at max but I would love any old school look as you mentioned!!
Keep up the amazing work!👍
I like the welds idea, but definitely wide is the way to go
Recently just bought a 2005 crew cab Silverado with a 5.3 in it and I love to see chomper content gonna have to go back and look at what u did love the videos keep it up
We need Larry chopping too!! Maybe a cam for Larry? Been watching for years always loved your videos and Ole lare bear💪🏼💪🏼💪🏼
the shorty headers for the ole 2 valve 5.4 would wake this truck up and make it sound like a beast Shorty headers are a must
I have been waiting for this video since the first time I saw ol larry great job man
Looks good. You may think about adding a 2” spacer to the rear the front sticks out more than the rear just how them knuckles do when put on
Beadlocks with 37’s would looks sweet
Yes Larry! Finally! That looks so effin good dude! I agree with goin old school with it!
Done put ole Larry in the clouds. 😮. I dig it man.
i think if you put a wheel spacer on the onther end to bring the wheels out the same as the other end it would look really neat
37in mud grapps wit 20in 2016 stocks would be 😮💨
Looks great ready to see it on some gladiators again
CHASEEE, amazing video.
Looking awesome! don't go higher
Love the vid keep up the great work #straightpipelife
Such a badass truck. New front end grille/bumper swap & complete respray would be🔥🔥
26x14s would be insane. I say find some 22x12 or x14 forged wheels that fit that lug pattern and run some 35 boggers would be sick
Looks good brother!! BFTough!!
Og 16x12’s and 35s would look awsome. Nice work man!
37s and 12 wides is what it really needs
16x10 or 12 on 38s on mud graps
I will forever be on the search for this fabtech lift 😅
I just bought one at a junkyard
Trying to find this lift, is it discontinued?
16:43 could be camera angle but it kinda looks like the rear axle ain’t centered in the opening just figured id mention it bc it could cause issues when you go to a big boy tire. I know some lift blocks have off center alignment pins. Larry looks dope btw keep ‘em coming.
I saw that too, I'm glad I'm not the only person who saw that.
Forsure gonna have to regear to some 4.33’s or 4.56’s to keep your transmission from burning out
Yea only gonna be at 5k rpm at 60
I wish you would do a ram build
Gon be looking so good luv Larry's upgrades he looked better before but even better now🔥💪🏾
Love seeing you include Lauren in the vids! Keep the posts coming brother, I watch them as soon as they release
Looks perfect maybe biggest tires now all that’s left is to go mudding
12 wides on boggers or 16s and 38 Grapps have my vote👍
Gotta do the bubba set up
My 10th Gen wants to be living like Larry, looks awesome man 🤙🏾
Old school look!
Larry is lookin good, I’m more of a Chevy guy but he looks good. Can’t wait to see what wheel and tire setup you go with.
If you could you can put Step ladders on there if you want to the ones that come down luv larry🔥🐐
She’s so beautiful😍😍😍😍
OG look with boggers
“it looks and feels absolutely massive”
Needs the tsl swampers
Time for some bullet holes 16x12 on some 35” or 37” mud grapps
I thoroughly enjoyed this upload, Good job man 💪🏽💪🏽🔥🔥
Duuuddddeeee, this has gotta be the best Larry has ever been. By far my favorite so far. I hope sides are in its future 😅
Boggers and billets fs
26s and 37s
Looks awesome man. Sitting perfect
Looks like larry is ready for 37s on stocks
Put some circular offroad lights on the front
Need to get some THORNBIRDS!!
I really like the idea of a small, wide wheel and some graps
Also, at 0:00 is a phrases I’ve never heard before
Larry’s really giving me prerunner vibes so I think it would look sick if you went with a prerunner style wheel and tire setup
I say do an old school style look. I think all the options you said would be sick. But I think some 16x12 or 16x14 or even a 16x10 and go really big on tires would look sick
Yes find some 12/14 wide welds and throw them on there
16x12/14s with 35/37s def boggers look the best
We love larry
Man I wanna learn how to do my own work. Clean truck
37 grapps or boggers on bullet holes would be insane
Old school with 37s no doubt 🤞🏼
Bro I have been waiting forever for this video
Did I miss the part how you fixed the spindles?
Interco thornbirds
Definitely something on 37s
I think the old school look would look amazing on it
20x10s and graps😮
Nice hey man where can I get that impact looks really handy?
Okay this re earned my sub. I refused to be following a squat queen. Lifted Tahoes a rough one but atleast it’s not a massive lift on dumbass big wheels
"it looks and feels absolutly massive"
Larry looks good but the bumper needs change
For future reference it’s a lot easier to lift the truck from the rear diff, undo the u-bolts then take two pieces of wood (like the one you stacked on the jack but bigger) and put them under the leaf springs on each side of the wheel hub then lower the truck onto those blocks it will then separate the space you need to remove the old block and replace with new one then Jack the axle back up to put ubolts back in. ALWAYS jack the truck from the rear diff when changing blocks and do one side at a time it will avoid messing up rear alignment.
FX4’s and 38” graps, right now!!!
Sickkkkkk bro!! So happy for you man keep up the badass content!
Leave it squated pls bro
I just bought a kit and it came with break line extensions, if you get any id love to see a how to video, keep up the larry videos 🔥
Keep like that to clean
Old school with bullet wholes and 37s and grapps or boggers
The inner wheel seal behind the inner wheel bearing should be a press fit into the rotor/hub assembly. I don’t know why yours seems loose and staying with spindle unless it’s the wrong seal for the rotors/model you have. It should have to be pressed or tapped into place on the back of the rotor with a seal driver and hammer, retaining the inner wheel bearing too.
I'm glad someone else saw this too
@@Timetractsdotcom curse of being a mechanic and working on thousands of trucks over the years, stuff like that stands out haha
@@MikeOn2Wheels it sure does! Just wait for his hubs to start leaking grease
Larry sittin pretty a set 14 wides would tie it together
Great video trucks looking good
I would love to see billets and Boggers
Where did you get the spindles from?