I know a guy who did that. He built it in the attic of his workshop out of full length pvc tubes. He had lots of storage for air. He thought he was really clever. When it blew up it blew all the sheetrock off the ceiling and most of the walls of his shop. Wasn't using a "baby" compressor...
Yes I have one of these compressors, and really good if used for a fishroom. There's usually a pull valve , or some type of release valve, and psi guage can easily be installed for other things. Good videos because I listen to music all day, and can just watch you build.
@@kishoresoni4055 these compressors are small, airbrush compressors. You will have to have a pressure Guage , to test it. They usual rate products like bike tires, at 90 psi, car tires at 35 psi. Anything hire than 90 psi, is for sand plasting and not for inflating pressure or painting.
I really loved this video and I would like to make it, but I just don't know what those two things that looked like hollow machine screws are. What are they called? I know others have asked you to name all of the parts and tools you used, but I read all of the comments and there was no reply. I've watched the videos a couple of times now and the first part several times. Are they some type of tire valves? I understand all of video except for those two items.. Thanks. Hoping for an answer. GREAT video either way!!
Your cylinder is good Inquiry : Why did not you cut it from the back to enter the air and break the air? Why did not the cylinder add 45% water to increase oxygen? There is air-conditioning and needs rubber to prevent air leakage and a rubber film that isolates air leakage How much cylinder capacity do you have? Can it be doubled? You'd better connect the air shaft with a 1 mm copper wire Connecting the air pipe inside and outside with a dedicated iron wire
I've seen many good videos on this channel, this is not one of them. Implied behavior cannot be achieved. The only form of pressure regulation is poor workmanship, it will blow the hose off unless you turn it off. Never imply that PVC should be used as a pressure vessel, particularly after modification! Vessel failure under pressure will result in an explosive release of razor sharp shards. If you had properly installed a pressure rated hose, we would never know because you wouldn't have survived to finish the video. That specific pump is capable of 200+PSI (almost 14 bar), that piping will tolerate 300-600psi - but only when brand new and professionally assembled, details you omit. Heaven forbid we lose you to a stupid video meant to get views, or you spend the rest of your life regretting the loss of a viewer - we appreciate you too much! The mature thing to do would be to take this video down, any corrections could get lost in translation. It was creative thinking, but there's a reason you dont see plastic air tanks anywhere! I would give you time to take these down yourself before I report them, but now I see there are several - if someone were to get hurt in the time I gave you, I would certainly regret it.
As well, there is a visible drop in pressure with each squeeze of device -- it would be more efficient to simply fit the gun to the device and let the little puffs do the (minor) work possible. You're right: it's click-bait, with click-bait music, and fine click-bait production, and ultimately dangerous.
*One video; so many lies.* First, there is nothing about this video that is "American" -- it is video schock intended as vacuous click-bait. Second, there is a visible drop of pressure with each puff from the device -- there is NO appreciable storage going on here; the "tank" runs out in seconds; *if it were pressurized to any degree, it would present a danger to those around it.* Structurally, it is a bomb with an incredibly obvious weak point (being two proximate holes in the end cap). I'd say, "What an idiot!" but I believe this was a purposeful post of dangerous idiocy.
Thats great bro.
Muito, mas muito mesmo, instrutivos , seus vídeos. Um grande abraço, aqui do Brasil, da cidade de São Paulo.
Absolute genius! This would be perfect for painting models with an airbrush. Thanks for posting this!
Have you tried doing this and using for airbrush? Wanting to create one for airbrush
I made this air tank and because a lot of air it is blast 💥💣
Can you please write the parts names you used in project ?
*Wow that's great & good idea* & wonderful 😘😍👌👌👌👌👌
Nyc bro!
Keep it up👍👍
Woow excellent
Hi. Pro. I love channel for you :)
Please how to make a using water tanker
I know a guy who did that. He built it in the attic of his workshop out of full length pvc tubes. He had lots of storage for air. He thought he was really clever. When it blew up it blew all the sheetrock off the ceiling and most of the walls of his shop. Wasn't using a "baby" compressor...
can you tell me more about it?
Yes I have one of these compressors, and really good if used for a fishroom. There's usually a pull valve , or some type of release valve, and psi guage can easily be installed for other things. Good videos because I listen to music all day, and can just watch you build.
Can you please suggest how much psi can a cylinder sustain inorder to avoid a blast if it is overdose.
@@kishoresoni4055 these compressors are small, airbrush compressors. You will have to have a pressure Guage , to test it. They usual rate products like bike tires, at 90 psi, car tires at 35 psi. Anything hire than 90 psi, is for sand plasting and not for inflating pressure or painting.
You're near to 1 million I've been seeing you since when you had 24k subs
hyuiuo
i realize it is quite off topic but do anyone know of a good website to stream newly released movies online ?
@David Patrick lately I have been using Flixzone. Just search on google for it :)
I come here for every new video! You express excitement that myself and many others are feeling.
Yes 👍👍👍👍👏👏👏
hi, friend
Thank you, I got new knowledge. I like to press and subscribe button, awaited reply from you🙏👍
ใช้เติมลมรถยนต์กระบะได้ไหมคับ
Good & creative idea. Please show each items name📝 and some points 📋when connected items together 📏✂📌in video.
Pompa pake adaptor yg brph volt bang,bisa kirim fotonya gak🙏🙏🙏
How many PSI do you have in that tank????
Nice...! 👍
Please mention MATERIAL needed for every project
Sandeep naik
And tools
how much psi is the maximum for that tank?
Possible to make auto turn off a machine when air tank get filled
I really wanted to build this man but you left no materials list or tool list
Can you use it for airbrush?
Badiya
You are really good. One of the best maker.
Indonesia hdr
Aa tenk preshur horn te kina time kado
Muéstranos un poco de tu divinidad desde peru
Or best
What u going to do with this i like to have it
I really loved this video and I would like to make it, but I just don't know what those two things that looked like hollow machine screws are. What are they called? I know others have asked you to name all of the parts and tools you used, but I read all of the comments and there was no reply. I've watched the videos a couple of times now and the first part several times. Are they some type of tire valves? I understand all of video except for those two items.. Thanks. Hoping for an answer. GREAT video either way!!
They are vehicle tubeless tire valves. Hope this helps
They're called schrader valves. Can get them at any parts store, or online
Can it paint the motorcycle body like a pro?
😍
Как детская поделка - вполне. Удивлен цепкостью цианакрилата, емкость видимо тоже им собирали...
How max tank pressure? It's can 7 bar?
if spry gun derect connect with compres can or not without air tank??
Xboleh
How much maximum psi can be set. And how much inches PVC pipe you had used. Please show proper procedure.
With water pump
Your cylinder is good
Inquiry :
Why did not you cut it from the back to enter the air and break the air?
Why did not the cylinder add 45% water to increase oxygen?
There is air-conditioning and needs rubber to prevent air leakage and a rubber film that isolates air leakage
How much cylinder capacity do you have?
Can it be doubled?
You'd better connect the air shaft with a 1 mm copper wire
Connecting the air pipe inside and outside with a dedicated iron wire
Really, all that for 20 pounds of air? What can you do with 20 pounds of air?
In the airbrushing world that's about perfect
American tech Bey
ปั้มลมราคาเท่าไรคับ
Id0
What is the back sound
Sir ye motor kahan milega
Coba tes pake ngecet
Muy bueno! Da las medidas del tubo pvc
Pvc ukuran brp
I'd be careful to not pressurize that more then 20 P.S.I.
Can we change this old style music please? I have to watch the video with the sound off
Dangerous, it's a bomb.
1 brush empty 😂
ABSOLUT DANGER!!
noisy music...
Wtf, useless but cool :D
u8
I've seen many good videos on this channel, this is not one of them. Implied behavior cannot be achieved. The only form of pressure regulation is poor workmanship, it will blow the hose off unless you turn it off. Never imply that PVC should be used as a pressure vessel, particularly after modification! Vessel failure under pressure will result in an explosive release of razor sharp shards. If you had properly installed a pressure rated hose, we would never know because you wouldn't have survived to finish the video. That specific pump is capable of 200+PSI (almost 14 bar), that piping will tolerate 300-600psi - but only when brand new and professionally assembled, details you omit. Heaven forbid we lose you to a stupid video meant to get views, or you spend the rest of your life regretting the loss of a viewer - we appreciate you too much! The mature thing to do would be to take this video down, any corrections could get lost in translation. It was creative thinking, but there's a reason you dont see plastic air tanks anywhere! I would give you time to take these down yourself before I report them, but now I see there are several - if someone were to get hurt in the time I gave you, I would certainly regret it.
Dang Mom! Stay off my RUclips. You're embarrassing me!
As well, there is a visible drop in pressure with each squeeze of device -- it would be more efficient to simply fit the gun to the device and let the little puffs do the (minor) work possible. You're right: it's click-bait, with click-bait music, and fine click-bait production, and ultimately dangerous.
*One video; so many lies.* First, there is nothing about this video that is "American" -- it is video schock intended as vacuous click-bait. Second, there is a visible drop of pressure with each puff from the device -- there is NO appreciable storage going on here; the "tank" runs out in seconds; *if it were pressurized to any degree, it would present a danger to those around it.* Structurally, it is a bomb with an incredibly obvious weak point (being two proximate holes in the end cap). I'd say, "What an idiot!" but I believe this was a purposeful post of dangerous idiocy.
Easy copy video of the other youtuber... 😑 😠
you are he or she?
She 😍
no. hee
please dont try this at home if u have a brain