2024年首台三色激光投影 极米RS10 Ultra首發體驗 XGIMI RS10 Ultra Review
HTML-код
- Опубликовано: 28 июл 2024
- 這是2024第一台三色激光投影，做工非常好，三色激光的短板補了一大截。畫面不多說，看視頻。電動雲台，低延遲，高刷，能給的都給了。
This is the first tricolor laser projector of 2024, with excellent craftsmanship, significantly improving the shortcomings of tricolor laser technology. Without saying much about the visuals, watch the video. The motorized gimbal provides low latency, high refresh rates, delivering everything it can.
00:00 影片簡介 (Video Introduction)
00:29 外觀&電動雲台 (Appearance & Motorized Gimbal)
01:46 畫質 (Picture Quality)
04:52 護眼三色激光 (Eye-Care Tricolor Laser)
06:03 雙認證 (Dual Authentication)
07:14 遊戲模式 (Gaming Mode)
08:19 安裝支架 (Installation of Bracket)
09:10 一個夢想 (A Dream) 
Хобби
Thank you for such a great review and also for putting English subtitles!
The production value on this video is amazing
最后这个梦想，我觉得相当不错！
沙发，🤣最后那个遥控器背光才是重点
Could you share the picture settings after calibration?
Hello, can i connect it to an external Bluetooth speaker, or wifi speaker ? ( does it have builtin Bluetooth ?)
你好，IMAX enhance 播放本地藍光電影的話也可以正常點亮嗎？我是外接電腦
The detail of this review is amazing. Can you conpare the contrast level of JMGO N1 ultra with XGIMI’s? That’d be tremendously helpful
Sorry, I haven't used JMGO, so I can't evaluate it.But I believe the difference shouldn't be too significant; the contrast ratios should both be around 1000-2000, as they both use DLP technology and shouldn't have fundamental differences.
Yet another nice and very informative review. Would you say the rs10 is more comfortable and relaxable to watch than c1 pro ? Due to this advance eye care feature ?
Yes, for me, using the eye care mode makes it more comfortable for prolonged viewing.
@@Kaola030 thank you Kaloa. And once again it s a pleasure and informative moment to watch your content 🙏
@@Kaola030 en la calidad de imagen relación brillo / contraste / colores / ruido del ventilador ¿es mejor que el vidda c1p?
How is the black level when you compare the Sony w5000es? By the way thank you for English subtitles 👍 great job 👏
This projector has the best black level at a brightness of 6, 0.05nit. The Sony XW5000 is 0.008nit, which is quite a big difference. However, in terms of black level, this projector is already considered good among DLP projectors. The black levels of the DLP projectors I've used typically range from 0.05 to 0.12nit.
@Kaola030, Great review ! Thank you. It's not clear in the comment. Is it possible to set the language in english ? If it's not possible for the Android system. Is it possible to set the menu setting in english ? Regards, Christian
Hello Christian, I asked XGIMI about this issue in January. The response was that currently the menu does not support setting to English, and there is also no information available for the overseas version at the moment.
Your reviews are very informative helps me a lot learning more about home theater system. I’d like to ask you a question. I’ve doing bit of research lately finding right projector for my need. I’m looking to buy a portable usb-c powered projector solely based on its visual quality alone. Which projector returns the best image quality? Your answer would help me tremendously. Thanks
I am completely unfamiliar with portable USB-powered projectors. I apologize, but I cannot help you.
I have a trip to Shanghai next month.. In which physical store can I find this product in Shanghai? Unfortunately, I don't have a chance to order online.
You can scan the QR code on this website using your phone, then select Shanghai as the city to get information about all the stores in Shanghai.
m.xgimi.com/pagesAssist/out/store?hideNavBar=true&
If you don’t understand Chinese, you can leave your email, and I will send you the translation.
@Kaola030 thank you for the review. How would I compare it to the ViddaC1 Pro?
In terms of image quality, the two projectors have similar contrast and color performance, with slightly better clarity on the RS10. However, in terms of eye comfort, the RS10 is better.
@@Kaola030 thank you 🙏
@@Kaola030¿qué hay del ruido del ventilador? Cuál hace más ruido? Saludos desde México. Excelente información
"En el modo de máxima luminosidad del RS10, a partir del nivel 10, el ruido es mayor, pero normalmente uso niveles de brillo entre 6 y 8, donde el ruido es similar al del C1P y no afecta la experiencia de ver películas normalmente. (Tengo el proyector ubicado a aproximadamente 1.5 metros detrás y encima de mi cabeza)."@@pantojachavarriadavid2766
Oh Nooo, I recently bought Hisense C1Pro and now this released :(, How much difference in picture quality over Hisense and Xgimi Ultra?
I loved your doodle animation
Me paso lo mismo justo ayer el c1p en aliexpres. Creo que aun estoy a tiempo de cancelar. Ya rebiste el tuyo? Que tal la calidad de la imagen?
En términos de calidad de imagen, no creo que sea considerablemente mejor que el C1P. La principal diferencia radica en que tiene un motorizado cabezal de seguimiento y un modo de protección ocular que hace que la experiencia visual sea más cómoda.
Hello, thank you for detailed video of this product. Should i get Chinese version or wait for EU version.
Thank you.
Sure, here's the response translated into English:
I suggest you wait for the EU version because the Chinese version doesn't have an English menu.
Thank you so much.
Does the RS10U support Dolby Vision in game mode or allow you to activate the low latency mode at 4K or 1080p resolutions with a refresh rate of 240 Hz and Dolby Vision?
Dolby Vision is only supported in Dolby Vision picture mode. When this mode is enabled, low latency and 240Hz refresh rate cannot be activated.
This projector (china version) can connect with Apple TV without any issues or not ?
In theory, connecting to an Apple TV should be fine, but I can't guarantee there won't be 'any issues.'
Could you share the measurements/dimensions of the RS10 Ultra? I tried looking online and can't find any information
The dimensions of the RS10 Ultra are 32.5cmx19cmx28.3cm. I hope this information helps.
How is the black levels? On rs pro 3 fhe black still has some grey. Does this rs10 solve the black levels. More black?
Just as mentioned in the video, its black level will become brighter as the brightness increases. The optimal black level is when the brightness is set to 6, and at most set to 8-9. At this point, the black level performs the best, and it should be better than the RS Pro3.
hello what screen did u use in this video? can i get the link ? thanks
Hello, my projection wall is DIY, using latex paint. The process is shown in the video from January 22, 2023.
想問一下考拉上校
目前的家庭影院還是使用w2700嗎？會否考慮更換新的智能投影跟三色激光？
目前用的是xw5000，w2700是灯泡机，和单色激光、三色激光相比观感是最柔和的，但它的亮度、色域肯定是不如三色激光的。追求极致画面的角度，现在来看它算不上好的，但日常观影特别是家里有小孩的情况下我觉得灯泡机还是有优势的。
謝謝🙏你的回覆
我的眼睛也是敏感型的，之前就會感受到電腦螢幕的閃頻，雖然朋友都覺得沒異狀，但我就很不舒服，三色激光的優點很吸引人，但短板又恰恰是我可能會困擾的地方，非常感謝你的解說。
Hello. I am using xgimi rs pro 3.
I have a problem that when I use it for more than 1-2 hours, the noise gets worse and interferes with watching videos. It's distracting.
Does the RS10 Ultra not have noise problems when used for a long time?
你好。我正在使用 XGIMI RS PRO 3。
我有一个问题，当我使用它超过 1-2 个小时时，噪音会变得非常大，影响观看视频。这让人分心。
RS10 Ultra 在长时间使用时不会有噪音问题吗？
I often use it at brightness level 6 and haven’t encountered significant noise issues. Are you using it at the highest brightness level, 10+? You can try lowering the brightness, updating the firmware, and if the problem persists, it might be a hardware issue. Consider contacting customer support.
Is it 3D capable? Does it work with 3D Blu-ray via HDMI? Thx a lot!
The built-in player can play 3D movies in both side-by-side and top-bottom formats. By connecting the Blu-ray player via HDMI and enabling 3D, when playing a 3D Blu-ray movie, the projected image will appear in a top-bottom 3D format. In the HDMI settings for projection, specifically in the 3D settings, selecting the top-bottom format might cause the image to display with some ghosting. I believe I have successfully activated the 3D feature, but since I currently don't have 3D glasses, I am uncertain about the viewing experience. Hence, I just purchased a pair, and I'll let you know the results after testing once they arrive tomorrow.
I bought a pair of Xgimi active shutter 3D glasses. Now I've confirmed that the RS10Ultra system's built-in player supports the playback of 3D movies in left-right or top-bottom formats. It also supports playing Blu-ray 3D movies through HDMI connected to a Blu-ray player. The response I received from Xgimi's official support is: this projector supports 3D formats in left-right, top-bottom, and framepacking. Additionally, I used another DLP projector that is three times the price of RS10 to play 3D movies, and found that there is almost no difference in depth perception (using the same pair of glasses).
Thank you so much again. I really appreciate your help! Greetings from Germany.
Is it ok to buy this for overseas. Will everything be translated to English since I can’t read Chinese Or should I wait for Horizon Max?
It's best to wait for its international version.
just connect it to xiami stick 4K or apple TV i guess.
Hello. Thank you for the great review. Please I have one question. I am using an old LG PF1500g projector. I would now like to upgrade to the new projector in 4K. Unfortunately the Hisense c1 is not an option for me. I need a projector with optical zoom. I am deciding between Xgimi Horizon Ultra, Benq x3100i or wait for the European version of the XGIMI RS10 Ultra (XGIMI Horizon MAX). Could you please tell me how big is the difference in image between XGIMI Horizon Ultra and RS10 Ultra? Thank you in advance for your early reply.
Sorry, I haven't used the XGIMI Horizon Ultra before.
@@Kaola030 Thanks
In the RS10U model, contrast is significantly improved, so forget about Horizon U.
@@Sinisteroid Thank you very much but I already bought a Benq HT4550i/w4000i so I hope I won't regret it :) So far I'm happy.
@@retrofilmtrailer1137 A good choice, calibrated and bright image 👍
纠结买H6 pro还是这一款，应该怎么考虑？
h6pro和这台价格差很多，主要差别是这台黑位比h6pro强很多，色彩鲜艳度差不太多。如果你对画质很看重买这台，如果家里有小朋友经常看买h6pro，牺牲一些亮度和对比度，但它的光源比三色激光对眼睛更友好。
想請問博主供電部分是帶變壓器的嗎 還是只能200-240v
是的200-240v
hey i just got my rs 10 ultra
i want to cancel smooth motion (MEMC)
i don't like the soup Oprah effect
i don't know Chinese and using Google translate
can you please guide me to setting to turn it off?
Okay, but I don't have this projector on hand right now. You should be able to find the MEMC option, which is called "运动补偿" in Chinese, in the following menus: 亮度与显示（Brightness & Display） > 图像模式（Picture Mode） > 自定义（Custom） >运动补偿（Motion Compensation）. If you can't find it, you can contact me and send me a photo of the menu, and I'll help you find it.
@@Kaola030 tanks i find it
i have another question
when i play dollby vision content i get the dollby vision logo on the right off my screen
but when i play hdr10 content i don't get a hdr logo
is it normal or am i doing something wrong?
and another question what picture mod do you recommend?
movie seems good to me
我可以将投影仪的 UI 语言从中文更改为英文吗？
不可以的，这台机器目前没有英文语言，也还没有海外版
Does it have an English OS UI? And interesting that it supported 240HZ even on PC, does it support 120HZ on the PS5?
它只能支持1080p下的120Hz，4K不支持的
It can only support 120Hz at 1080p; 4K is not supported
This projector will have an international version in the future, and it will support an English UI.
@30 Thanks a lot for your answer, I am fine with the chinese version since I'll use my own android box and such. Thanks for your reviews and time, really appreciated.
@@stevemcqueeny So it’s not confirmed that there is English available in the OS UI ? Only Chinese ?
可惜 感觉海信买早了。。这台感觉更适合我
一直会出新的，早买早享受😋
这个支持1440p分辨率下的120hz吗？
不支持，1080p120hz
@@Kaola030 谢谢，那这不是真HDMI 2.1啊，优派色域对比不行，benq x3100只支持输入，输出还是1080p，当贝对比度也有点低的过分，500.。。。。。1440p 120HZ投影仪怎么这么难找
@@carllv9846 Because DMD Chip DLP 0.47 is not capable of this mode, you need a projector with a larger DLP chip. Check out the review on the channel The Hook Up - Ultimate GAMING Projector Comparison - BENQ X500i, X3100i, ViewSonic LX700-4K, X2-4K, Epson LS11000
3d?
我听说该网络在韩国无法使用，这是真的吗？
如果是用内置的系统播放流媒体，是的没办法在海外用。如果是用外部播放设备，比如蓝光机、PS5，不依靠网络在哪里都能用。另外这台机器会出海外版，时间尚不确定。
跟明基i780比呢？我看他们价格差不多。
不确定，i780没有用过
台灣買不到啦
不错啊 不知道价格如何
京东上有
9999和10999元，两款峰值亮度不同
@@Kaola030 thank you for the review. Do you know if it has English menu in it as well?
@@benhammou5381 Thank you. The one I'm using doesn't have language options; it only has Simplified Chinese. I heard there will be an international version of this projector released. I'll reply again when I get more information.
@@Kaola030hello, any updates on this, can we now change the UI language to English in settings?
我可以将投影仪的 UI 语言从中文更改为英文吗？
不可以的，目前没有英文语言