LIEBHERR LTM1750 - 9.1 with 56m Luffing Jib Setup | Part One
HTML-код
- Опубликовано: 17 ноя 2024
- Here is the LIEBHERR LTM1750 - 9.1 from Peck Tiong Choon being rigged with 56m of Luffing Jib on a closed road of Singapore. It's being used for the dismantling of a tower crane.
CAMERA GEARS I USED:
=================================================
CAMERA:
Canon EOS R50 - amzn.to/3KWhgn3
Canon RF 24 - 105 f/4L - amzn.to/47J8IK9
Mic:
RODE VideoMicro - amzn.to/3OYxqNU
=================================================
Like my video? Please give a like and subscribe to my channel!
/ sgheavyvehicles
To see more photos of such heavy cranes in action, please visit my good friend’s page on Flickr too!
flickr.com/pho...
-Find Me On-
Tiktok: www.tiktok.com/@sgheavyvehicles
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product with the links that I provided, I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel!
#mobilecrane #crane
Wah. Can't wait for part 2! Side note.. Would it be possible to add in a comment to show what the crew is doing at a particular point in the video? Like extending outriggers, adding counterweight base plate etc
Sure! Thanks for the feedback!
LTM 1750-9.1 is really amazing crane..Love that❤
Great job👏👏👏
Thanks a lot!
I thank it’s very interesting that they put on fall protection and then don’t use it but once or twice
Yes, exactly! They have 2 clips so should be attaching to a second point, before detaching from the first. But working in a harness is awkward enough without being clipped-on, so some workers become relaxed about it... until they have a fall.
Supervisors should be pulling them up on it, there seem to be enough of them.
Not sure fall arrestors are appropriate anyway, as they are working at different heights: too low and they hit the deck before it fully deploys. Looks like a job better done out of a MEWP as far as possible and if someone has to be on the crane, then an inertia reel or airbags (or possibly a fall restraint) would be preferable.
Consider speeding up the video. As in most construction worksites in Singapore, one worker will do the work and several other will hang around, watching but not doing very much. Good to add the basis why this crane was selected.
I did consider speeding up before, but i feel it affects the overall mood because it can feel like im rushing through. Would you prefer short snippets kind of video?
Super cool video! Not sure why RUclips sent me to this, but I sure do love it
Thanks for watching!
Power lah shawn and chester!
Why are ballast/flatbed trailers in Singapore all tilted like that, higher near the fifth wheel of the tractor but becomes lower towards the rear
Because the suspension height plus height of the fifth wheel of the tractor is higher than the trailer’s suspension 😁 There are some tractors where it’s chassis height is the same height as the fifth wheel, then you wont see this tilting effect
An entertainment fo lunch break
Great video 🤓🙋♂️👍
Thank you 👍
Excellent!
Many thanks!
Why is the lower motor still running
The lower motor runs during the setting up of the crane, until the hydraulic and electrical connection with the Power Pack is performed.
Luar biasa..mantap
하루 임대비용은 얼마죠
So huge crane😮😮😮
ما شاء الله..تبارك الله..
Alat yang cukup canggih
Indonesia.❤❤❤❤❤❤
Чи ни кран, вот РАНЬШЕ БЫЛИ КРАНЫ!!!
Is that a Female operator for this crane?
No.
👍👍👍👍
wow
👍👍👍👍👍👍✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️🙏🙏🙏🙏🙏🙏🙏 indonesia..
guys. how about you clean the crane a bit.