Slide-topper Fabric Replacement Walk-through
HTML-код
- Опубликовано: 10 сен 2024
- Become a Patron: / myrvworks
Parts and Tools Affiliate Links: myrvworks.com/...
myrvworks.com
Certified Mobile RV Technician, Darren Koepp, walks you through removing and replacing the fabric on this slide-topper.
If you are in need of RV Repairs in the Olympic Peninsula area of Washington state, submit a service request on our website at myrvworks.com today!
Topic: Slide-topper Fabric Replacement Walk-through
Tools:
Magnetic Parts Tray - amzn.to/2loYLz5
DEWALT 12-Volt 1/4-Inch Impact Driver - amzn.to/2U89FGm
Utility Knife - amzn.to/2mZcLjw
Flush Cutter - amzn.to/2Lhw4wP
Shop Supplies:
Portable Folding Sawhorses - amzn.to/2Wy4vod
Little Giant 22-Foot Multi-Use Ladder - amzn.to/2kYxVOf
Compact Folding Ladder - amzn.to/321mJj5
PPE:
Gelfit Thigh Support Stabilization Knee Pads - amzn.to/2SrQIhc
Maxiflex 34-874 Ultimate Nitrile Grip Work Gloves - amzn.to/2O7KKBQ
Happy Camper Embroidered Cap - amzn.to/2Yg5RYm
Propper Men's Short Sleeve Tactical Shirt - amzn.to/2XXF1Vu
Propper Men's Tactical Pant Poly/Cotton Ripstop - amzn.to/2Yh4BUC
Related Videos:
Awning Playlist - RV Awnings
Film Date: 10/11/2019 (Darren & Anne Anniversary!!!)
Location: Kingston, WA.
Camera/Audio:
Samsung Galaxy Note8
Native Camera
16:9 FHD 1920x1080
Version 9.0.01.38
60-Inch Lightweight Tripod - amzn.to/2ZqBuPv
Wireless Microphone System - amzn.to/2ZAD4KI
Music:
"My RV Works-Jam"
Composed by Steve Patry - Four Faces Band
A family that works together succeeds.
Our awning toppers are about ready to be replaced. This is something we will attempt ourselves.
As always your Videos and our confidence will save us a lot of heartache and cash as well.
Thank you Darren and Mrs. Darren for your vlogs. You’re so appreciated.
You have one of the very best RUclips sites in the country to help do it your self with RV repairs. I've watched all of your videos and always tell everyone I know how well you explain everything in great detail. I do all my own work and your videos have helped me immensely! Please keep up the great work!
I agree wholeheartedly. I have everyone i know watching now.
We agree as well. Thank you for putting that out there.
100%
You are one of the few channels i subscribe too. Thank you for the hard work.
First repair job I've seen on the Arctic Fox, so thank you. Just so happen I need to replace our Slide topper and just as you discovered I could not find the other hole on the backside of the tube, so thank you for pointing that out. Nice job.
I'm happy my slide topper was only about 7ft long so I was able to slide out the old one and put in the new one by myself in less time than it took me to watch half this video since I left the hardware all mounted in place 👍
Good help is hard to get! Nice job, Crew!
Instablaster.
Make it easier yet by bringing in the slide-out, pin and remove the tube from the mounting bracket and place it on the RV roof. Now you can pull the fabric out of the gutter, sliding the tube along the roof until the fabric is out of the gutter. take tube with old fabric to the ground, remove the old fabric from the tube, replace with new fabric fully onto the tube, and reverse the removal steps. One person can do it this way.
I replaced a topper awning fabric last week for the first time on a mobile call. I've done a few in the shop where we have plenty of flat concrete floors, ladders, shade and extra hands. It's a different experience out in the field like that. The existing gimp rail had been pieced together making removal and installation of fabric very difficult. I used slide seal conditioner to lube the rail. Also had to drill out the rivets to remove the end cap so I could remove old fabric and install new in the tube. Anyhow thanks for sharing.
Nice job Dakota!!! :)
Fantastic 😊👍👍🇨🇦✌️🇨🇦✌️🇨🇦👍👍
Great Videos! I have replace 2 out of 3 toppers and I wish I had found yall earlier. GOOD work saving tips, well done! I do have a question , Have you ever Debadged and RV? I have stickers that look TERRIBLE. Need some good suggestions to get it done RIGHT!
Great video, thanks for the detailed video. I have a Rv with the slide toppers and the two long ones have water pooling when it rains. The shorter bedroom one doesn’t. I’m on a permanent site so not sliding the slide outs in but once at end of season. Is there a better solution than climbing on top with a broom to empty those pools? I’m a little older and don’t like going on top too often. Thanks again
I can state that I am not a big fan of slide toppers. They are a maintenance headache (Although for my business they are cash registers so that's the only reason I like them LOL) But there's all kinds of contractions people use to keep them from flapping in the wind, preventing them from collecting water, as in your situation, and they collect water underneath which causes mold and leaves get trapped which causes issues on the wiper seals when they extend or retract. My recommendation, and what I did on my RV, was I just removed them and have had no problems since. So that would be my suggestion for your situation.
How do you tell by looking if one end of the tube is free spinning as apposed to being under spring tension???
Question... Why didn't you replace the fabric with the slide room in instead of extended?
So he would have some place to set the topper once removed from the slide room.
Hello sir I love watching your videos you make everything look easy and thank you for sharing but I looked through your videos and I can't find what I need help with but my problem is I ordered a Solara topper and it's almost 2 feet to long and I can't return it so I'm wondering if I can cut off one of the ends to make it the length I need if you have a video or know of one could you please share it with me and I can't figure out if Solera has a spring on each end
Great explanation. Is it difficult to install a slideout awning on a trailer that doesn’t have one from the factory?
Seems to me you did it the hard way, we have domitic toppers and found it very very easy to leave the hardware in place and unroll the fabric, put in the pin remove the set screw replave the fabric and while holding the roller tight pull the pin and again slowly release the tension. Total time to replace a 15' awning cover 15-20 minutes.. we also found that sometimes those bracket bolts do not want to play nice and come our.. Just an fyi
I’m a new rv tech, just wanted to know why you decided to remove the roll tube assembly off the slide out? P.s. Love the videos!
What to do when spring got uncoiled?
I don't agree.. wife and I replaced ours didn't need 3 people. After I pinned the roller, we lubed up both tracks with dawn soapy water and they both slide in at the same time. Factory awning material is the cheapest possible, get the heavyest stuff you can afford. helps when the wind is blowing.
But