Gut that lower intake bro! Mine made an extra 10whp at redline and zero power loss anywhere, no tuning changes. 150whp/tq on my dyno. Super fun with the H trans. The F23 intake has a ton of potential for porting and gutting like the H series manifolds.
Nice numbers for a near stock single jingle. When I had my f23 in my eg I struggled to make high 140’s. Ripped it out and went b since but you can’t go wrong with the f’series. But as u said dirt cheap engines with decent power.
Awesome build ! I really look forward to your videos. Me and the guys at work have been watching your progress. Next time you come through Richmond give me a shout.
That's wassup bro! Lol some people don't realize how crazy it is that these little motors are making that power and they like 20 year old engines 😂😂😂. And all those older Hondas are relatively lightweight so it's not terrible. As always enjoying the contents fam keep it up!! Lol my baby is almost ready E85 TurboF20B CD5 I can't wait. Kind of sad I never got to experience the difference just from the f22b1 to the F20B stock but it's all good I'm just rushing I've never had a turbo car lol
Hey man, great numbers on this engine. Just motivated me to keep going forward man. I have a question, did you get good timing with the vtec distributor you installed? Please let me know as im still in a battle with the one i currently have and cant get good timing on it.
made some good powah!! it's time for me to drive up from SC in my CB7 and link up with you and Jeff. bring some light to the CB7 community with a meet and cruise maybe.
HOLLY SHIT MAN. That's dam good hp/tq for the stock f.. cant wait to see what #z I get out mines.. Dyno mines Saturday.. Man we need to meet up bro.. SC silver drag strip man bring all the cbz down it plenty of us bro we need to up..
I always wanted to get my f23 in my cg tuned to see how much it can put down. I want see more f-builds. People sleeping on em bruh. So much potential but people stuck on kand j swaps. Good shit bro.
I cant wait till I can get yall to do a tune on my 98 2.3 accord jdm swapped ect, building it N/a now, got a p28 ecu tuning it myselft to get the idle right than Im ready some advice lol
Oh shit I’m going to J Mills for my b20v hopefully later on the season I can run into you I stay around alamance co, looks like a dope ass daily pulls hard
I've always loved the F23A1 motors, I've had 4 different 1998- 2001 honda accords , 1 accord was 1996 with the f23a1 swap , the f22 trans bolts right up and has longer gears loved that car , hopefully you do some mods to this engine and maybe turbo it someday and take people to Gapplebees
Relocate your battery and I bet you hit 165. Good job dude, should be dope to see how it goes in the future. This should definitely be the boost car dude. 🤌🏾😂✊🏿
@@hseriesonlymonctonnb1181 definitely, it’s a 2 liter, so I’m sure it has the capability to do some damage. The thing is just finding the optimal parts for the platform and application.
You can actually modify the H23 intake manifold to bolt to the head just a little shaving on the side by the thermostat housing it’s a nice gain with the complete intake
The H23 manifolds ports are actually way bigger than the ports on the head. The F23 manifold can be gutted like an H manifold and gives really good gains.
@@BeansTune so just take an h23 intake manifold shave the manifold down and port the cyl head might as well drop in som k20 pistons and jump up compression to 11:1 from 9.3:1 with more air should be about 180 stock to crank so like 160 wheel factory
@@matthewrodriguez552 yeah, not quite..... Bolt on F23's make 150-160whp pretty easily without touching anything internally. The H23 manifold is of no benefit when the F23 manifold is already just as good/better with the same type of potential for gutting/porting.
I know your a busy man with work and wrenching on weekends and such, but check your snap bro ive been commenting over there too man. Keep up the great content
Put a RBC manifold on it you’ll see a big difference in power and response. The f23 manifolds exhaust and intake are very restricted! But good stuff bro love from you boy ej1_boy_vick on IG
What kind of idle air control valve are you running on this man if you dont mind me asking? I have a cg5 accord that I boosted and am running a Bluetooth p28 ecu but need an obd1 iacv to be able to adjust the idle on amd get my car running right
I delete that on all my cars bro. Either we adjust from the set screw on the tb or we bend the throttle plate where the cable hooks to it to get the idle right. It's less headache and I don't have to worry about it failing later
I got mint 4 door with 120 000 km probably like 70 000 miles there out there the coups are another story tho been looking for awhile to put my turbo swap in but out here there all rusted out so I jumped on the low mileage one when I had the chance best 2800 I ever spent
@@DrivenFilmsPhotography so like Raleigh/Fayetteville etc. I gotta see my boy who has both a stock F22B1 with breather mods and a 13 J35 coupe. Maybe I'll come looking for you one time. 😁👊
@@DrivenFilmsPhotography just be careful out there cuz. Y'all be wildin out at some of these meets and pretty soon we won't have none. Lol. Side note, kinda looking at an F23 CL in Gastonia so hopefully it's not too much of a shit box that I can grab it and work on it a little.
Авто/Мото
Gut that lower intake bro! Mine made an extra 10whp at redline and zero power loss anywhere, no tuning changes. 150whp/tq on my dyno. Super fun with the H trans. The F23 intake has a ton of potential for porting and gutting like the H series manifolds.
Gonna need a new clutch when your tuners done with it
fr bro i was like 😢
Made some good power. I didn't think it was going to make that much. Impressive for sure bro. Those backfires sounded crazy LOL!
Dude I love your channel and all of the F series content. People don't realize that these are simple 230whp NA motors
Hell yeah! Love it!! Riding that clutch pulling on the Dyno about made my heart stop though 😂
Same I was cringin😂
Saw the upload this morning and been waiting all damn day to get off work n watch 🤣
Got the same motor in my CL and I love it. Keep it coming🙏
Bra killin me lol cuz said " Get your dremmel ready"! Make that into a shirt!!!!
That bih put together. Them pops n u say shhhttt. Love that car bro. Dammn
Nice numbers for a near stock single jingle. When I had my f23 in my eg I struggled to make high 140’s. Ripped it out and went b since but you can’t go wrong with the f’series. But as u said dirt cheap engines with decent power.
What a monster, great build man!
Awesome build ! I really look forward to your videos. Me and the guys at work have been watching your progress. Next time you come through Richmond give me a shout.
Appreciate it fam! Will do 🙏🙏🙏
That's wassup bro! Lol some people don't realize how crazy it is that these little motors are making that power and they like 20 year old engines 😂😂😂. And all those older Hondas are relatively lightweight so it's not terrible. As always enjoying the contents fam keep it up!! Lol my baby is almost ready E85 TurboF20B CD5 I can't wait. Kind of sad I never got to experience the difference just from the f22b1 to the F20B stock but it's all good I'm just rushing I've never had a turbo car lol
That's impressive numbers. Good work
I'm almost ready to put mines back together and I got to to have one of those push starts 🤩🤩😅😅
Great content pretty good power
Niiiice!!! I know rims probably comin but any plans on tuckin tires 😆 just a nice snub not too low🤔 as always R.A.B. ✌🏽out
Damn Beautiful JDM for life..
Good shit my dude i gotta swap the cb wagon wit this k asap
Hey man, great numbers on this engine. Just motivated me to keep going forward man. I have a question, did you get good timing with the vtec distributor you installed? Please let me know as im still in a battle with the one i currently have and cant get good timing on it.
made some good powah!!
it's time for me to drive up from SC in my CB7 and link up with you and Jeff. bring some light to the CB7 community with a meet and cruise maybe.
Definitely need to set something up 🙏 this summer gonna be lit
I’m in sc too with a 6th gen
HOLLY SHIT MAN. That's dam good hp/tq for the stock f.. cant wait to see what #z I get out mines.. Dyno mines Saturday.. Man we need to meet up bro.. SC silver drag strip man bring all the cbz down it plenty of us bro we need to up..
Dope asF man 👌Those are great numbers!! Should make an awesome daily 💯.. any thoughts on spraying it?
Makes me wonder what mine does..
Looks like a fun daily.
Definitely bro. With paint and wheels it'll be a nice car to take to meets and shows. Ac and all
I always wanted to get my f23 in my cg tuned to see how much it can put down. I want see more f-builds. People sleeping on em bruh. So much potential but people stuck on kand j swaps. Good shit bro.
I feel you, it just sucks because no one makes anything for the F23. I have a CG too, planning on building it later with k pistons and all that jazz
So I have a 97 accord with a f23a can I just pay for a dyno tune or do I need one done before hand?
@@matthewrodriguez552 is urs a auto or manual)
@@alecblackburn9831 manual
Notification squad 💪🏾
Bassicly 160 whp 160 torque is pretty awesome you gotta do a ported head high comp h23 then you see 200 foot pounds mark ! High 200s hp on pump gas
Hell ya dell 🔧❗️❗️
I cant wait till I can get yall to do a tune on my 98 2.3 accord jdm swapped ect, building it N/a now, got a p28 ecu tuning it myselft to get the idle right than Im ready some advice lol
Oh shit I’m going to J Mills for my b20v hopefully later on the season I can run into you I stay around alamance co, looks like a dope ass daily pulls hard
Sick bro‼️ definitely hope we run into each other🙏🙏
That shit look like its running tight!
Amazing built I want to do the exact sane &get the tune even if I only make 152 I’m in Mexico I would have to find a good tuneer
Saw when jmills posted the pictures
yeah the F23 is supposed to be a stout single cam, there is a vid of Brent at PFI tuning a boosted F
HTS for the win
I've always loved the F23A1 motors, I've had 4 different 1998- 2001 honda accords , 1 accord was 1996 with the f23a1 swap , the f22 trans bolts right up and has longer gears loved that car , hopefully you do some mods to this engine and maybe turbo it someday and take people to Gapplebees
Btw this is a f23a jdm its slightly different in power compared to f23a1 witch is usdm
@@jdmitchellguy401 I know , both claim to be 160 HP
@@scottydoesntknow2345 usdm 150 and 152 torque
So I got a stock f22a1 manual transmission that will bolt right up and I can use it for my swap to the jdm f23??
@@-skeptikalsavage-2382 yes sir
Relocate your battery and I bet you hit 165. Good job dude, should be dope to see how it goes in the future. This should definitely be the boost car dude. 🤌🏾😂✊🏿
That trans will do over 200 mph if you can rev till 8500 ask me how I know I got a spooky boy tho
@@hseriesonlymonctonnb1181 definitely, it’s a 2 liter, so I’m sure it has the capability to do some damage. The thing is just finding the optimal parts for the platform and application.
@@charlesdemeary this motor a 2.3 probably wouldn’t be able to rev that high as it wasent built like that I run the Trans on my h22
Too clean
Yeeyeeee that HTS lyfe
OH SWEET!!!!!!!!! NICEE!!!!!!
Good numbers
Literally looking at one of these f23s for a while now for my cb7 coupe. Any thoughts or recommendations/ tips?? Lmk my original engines toast
You gotta feather your gas pedal when engaging the clutch. "Feather?! I don't know the meaning of the word!"
Oh shit you’re in North Carolina bro I wanna change my automatic to a Manuel 5 speed I have a 93 EX I just bought
I saw a white cb7 today and I just wanted it so bad
Bisimoto level 2 cam. You should see 180whp+
You can actually modify the H23 intake manifold to bolt to the head just a little shaving on the side by the thermostat housing it’s a nice gain with the complete intake
The H23 manifolds ports are actually way bigger than the ports on the head. The F23 manifold can be gutted like an H manifold and gives really good gains.
@@BeansTune so just take an h23 intake manifold shave the manifold down and port the cyl head might as well drop in som k20 pistons and jump up compression to 11:1 from 9.3:1 with more air should be about 180 stock to crank so like 160 wheel factory
@@matthewrodriguez552 yeah, not quite..... Bolt on F23's make 150-160whp pretty easily without touching anything internally. The H23 manifold is of no benefit when the F23 manifold is already just as good/better with the same type of potential for gutting/porting.
@@BeansTune what bolt on are we speaking of
@@matthewrodriguez552 basic intake/header/exhaust. They're pretty restricted from the factory.
Hello just started watch your videos i have a 99 accord with the f23a1 automatic are there any simple bolt ons for horsepower gains
1993 cb7 owner turbo build coming next week
What ECU are you using? I have the same engine I put into a 92 EX. But the ecu was shot so it’s running on an f22 ex one at the moment.
Your b16a eg got some competition with your accord
Definitely gonna run em🙏🙏
Hell yeah 💪🏿💪🏿💪🏿💪🏿🦾🦾🔥🔥🔥🔥💥💥💥🔥🔥
What’s the name of your intake filter? I have been looking for those kinds of intake filters for my car
Is that a Ghost starting button?
How much was it for the tune & exactly which tune did you get ?
What tune you running to get those pops like that
Needs some k series pistons now 😅
How do you get it to shoot flames
What exhaust is that!?
Did you use f22b1 intake ??
I wish mine sounded like that lmao
People sleep on the f23 so much it’s a beast!
Especially with a H22 head and e85.
My guy
I have a 2002 of with a f23a jdm full vibrant exhaust Megan headers can I tune my car or does it have to be stick?
Same setup and question?
R u from the warrenton area fam? I used to live in henderson..hmu
why was it idled so high
Dude said get a oxygen tank and ride around with it 😂😂😂
How much is it for a tune ?
I need help don't know how to start
Bruh I got pulled for the same thing lmao shit wild
I know your a busy man with work and wrenching on weekends and such, but check your snap bro ive been commenting over there too man. Keep up the great content
What motor mounts did you use? Also, did you rewire or use a different complete harness?
Always rewire the oem stock harness. It's not that bad. And I used welded stock engine mounts
Price
Where did you get the header I know eBay I can’t find one
Yea they really tuff to get now. This was before the rpm act came in. Now you have to try to Google and order from 3rd party websites
Put a RBC manifold on it you’ll see a big difference in power and response. The f23 manifolds exhaust and intake are very restricted! But good stuff bro love from you boy ej1_boy_vick on IG
Appreciate it fam🙏🙏🙏
What does the jdm F23 have that the U.S. F23 does not?
I have no ideal bro honestly
What kind of idle air control valve are you running on this man if you dont mind me asking? I have a cg5 accord that I boosted and am running a Bluetooth p28 ecu but need an obd1 iacv to be able to adjust the idle on amd get my car running right
I delete that on all my cars bro. Either we adjust from the set screw on the tb or we bend the throttle plate where the cable hooks to it to get the idle right. It's less headache and I don't have to worry about it failing later
@@DrivenFilmsPhotography gotta show how you did this💙
This a 2st 158who n tq💪
I think it's time for you to build a motor
It’s wild cause aren’t these engines only advertised from Honda as 150hp @ the crank?
I believe so bro
@@DrivenFilmsPhotography where do you source your engines from? I know most places the inventory for a H23A or F20B is always sold out.
@@wrenchesandrants9321 jdm city va is where I've been the last few times
Which ecu you use ?
Chipped p28 on honda tuning suite software
What throttle body can I use for my f23a1?? I need ur help bro 🙏
Same one
With an f20b head itll make more torque than the h23a
What the vtec set to? Can’t really hear the crossover like mine
Like 2900. The f23a likes it really low
What ecu are you on I’m swapping f23a into my cl
Chipped p28
what exhaust is that
Its a ebay 3in bro. Had never seen one till I found this one. Only cost 150 bucks shipped
Where do you find these cb7s at this nice. All I can find is rusty shit boxes
Man they all have their issues for sure. Youll see in the upcoming videos lol
Makes me hate that I ever got rid of my cb7 for sure. Had a 93 5 speed.
I got mint 4 door with 120 000 km probably like 70 000 miles there out there the coups are another story tho been looking for awhile to put my turbo swap in but out here there all rusted out so I jumped on the low mileage one when I had the chance best 2800 I ever spent
What ecu are you using?!
Chipped p28
Where in NC are you? That damn sure ain't around here in Charlotte bro.
Hell nah lol. I'm 3hrs from Charlotte. Closer to the coast
@@DrivenFilmsPhotography so like Raleigh/Fayetteville etc. I gotta see my boy who has both a stock F22B1 with breather mods and a 13 J35 coupe. Maybe I'll come looking for you one time. 😁👊
@@thatloudCG5 definitely fam! Yea im like 40mins from Raleigh. Supposed to go up there for a big meet this weekend
@@DrivenFilmsPhotography just be careful out there cuz. Y'all be wildin out at some of these meets and pretty soon we won't have none. Lol.
Side note, kinda looking at an F23 CL in Gastonia so hopefully it's not too much of a shit box that I can grab it and work on it a little.
@@thatloudCG5 shoot they be wildin. I haven't even made it to one this year. They be doing the most for sure
My bad Cleetus Snow on snap
Not the fart can😔
93?
yessir
What ecu and chip are you running,,,
Honda tuning suite
Its a chipped p28
Bro can I borrow that basemap
Really need it for my cg
Take those stickers off the battery please. Itll look better without them
What computer bro
Chipped p28
Them shits put in work 😂💀
Dam my guess was off by 1hp😂
Wow really? Need to send you out a slap lmao
SUBSCRIBED FOR THE ACCORD CONTENT ! love me some hotwater hondas
Appreciate it man! Welcome to the channel and thanks for subbing🙌🙌
@@DrivenFilmsPhotography awesome builds awesome channel !