The prosthetics and orthotics industry is a very rewarding field to be in and has a high demand for technicians and practitioners in most areas. As a technician, there are several schools across the United States that you can get trained in and some businesses are willing to give you on-the-job training. As a certified practitioner, you will need a masters in the field. If you go to www.abcop.org/ you will find more information about the field
Very good video, I am starting to use the system and with the video it is quite clear how to make the socket, thank you for teaching all the process. I have learned a lot. Gracias por el video es muy instructivo y me ha ayudado a comprender perfectamente el proceso de fabricación y a mejorar el acabado de un laminado.
miguel verdejo the lock will fail shortly after it’s installed. I’ve had one on a couple different sockets and it’s nowhere near as good as Bulldog locks. Hope it works, but be careful for failure.... it is definitely going to happen.
does your vacuum station have inner and outer vacuum lines? Just curious if your inner pva bag is under vacuum as well? The system we have has a plastic plate that we tie off our outer bag to on a station but I like the setup you have with the station attached to your workbench. Would you be willing to make a video of your setup? Appreciate the detailed explanation of this lock setup! Thanks
Hi Brandon, thanks for your question! The stand and set up we have is custom, the pipe has multiple holes which allows us to get vacuum on the inner and outer PVA bags. Hopefully that answers your question :) Also, we are actually hosting a Tech Chat Tuesday via Zoom on February 1st where our techs will be available to answer any and all questions about product fabrication or central fabrication! Here is the link, we would love to have you there! :) us06web.zoom.us/meeting/register/tZIude6trjIvH9yHPbxDgUlpejISFqiphiy-
We have several distributors in many countries. If you go to this page, it shows the distributors www.coyote.us/distributors-2 If any of the distributors don't include your country, Raven Orthopedics may be able to send it to it. You will find them on that page as well.
Elija CC (subtítulos) en RUclips y luego vaya a la configuración (icono de engranaje) y luego seleccione traducir automáticamente al español. También tenemos instrucciones traducidas para nuestros productos en www.coyote.us/instructions
Very nice work
I would love to do this as a professional
The prosthetics and orthotics industry is a very rewarding field to be in and has a high demand for technicians and practitioners in most areas. As a technician, there are several schools across the United States that you can get trained in and some businesses are willing to give you on-the-job training. As a certified practitioner, you will need a masters in the field. If you go to www.abcop.org/ you will find more information about the field
@@CoyoteDesignMfg Do you have a program in Indianapolis?
Very good video, I am starting to use the system and with the video it is quite clear how to make the socket, thank you for teaching all the process. I have learned a lot. Gracias por el video es muy instructivo y me ha ayudado a comprender perfectamente el proceso de fabricación y a mejorar el acabado de un laminado.
miguel verdejo the lock will fail shortly after it’s installed. I’ve had one on a couple different sockets and it’s nowhere near as good as Bulldog locks. Hope it works, but be careful for failure.... it is definitely going to happen.
Great job sir and thank you very much
helpful ty
does your vacuum station have inner and outer vacuum lines? Just curious if your inner pva bag is under vacuum as well? The system we have has a plastic plate that we tie off our outer bag to on a station but I like the setup you have with the station attached to your workbench. Would you be willing to make a video of your setup? Appreciate the detailed explanation of this lock setup! Thanks
Hi Brandon, thanks for your question! The stand and set up we have is custom, the pipe has multiple holes which allows us to get vacuum on the inner and outer PVA bags. Hopefully that answers your question :) Also, we are actually hosting a Tech Chat Tuesday via Zoom on February 1st where our techs will be available to answer any and all questions about product fabrication or central fabrication! Here is the link, we would love to have you there! :) us06web.zoom.us/meeting/register/tZIude6trjIvH9yHPbxDgUlpejISFqiphiy-
A onde comprar está pesca
We have several distributors in many countries. If you go to this page, it shows the distributors www.coyote.us/distributors-2
If any of the distributors don't include your country, Raven Orthopedics may be able to send it to it. You will find them on that page as well.
Moulage de la préparation d'une prothèse fémorale à mon avis laisser le croquis j'us 'su à la fin de la prothèse
Lo podrían traducir con subtitulos al español porfa!
Elija CC (subtítulos) en RUclips y luego vaya a la configuración (icono de engranaje) y luego seleccione traducir automáticamente al español. También tenemos instrucciones traducidas para nuestros productos en www.coyote.us/instructions
Marca que no está disponible esa opción.
R4$😝 4:34