1/350 Yamato Battleship RC Conversion Tutorial II
HTML-код
- Опубликовано: 10 сен 2024
- This is the second episode which covers the last half of essential sections for building the 1/350 Yamato 78030. Again, the approach is not limited to TAMIYA 78030 but 78025 or 78014 as well. Nevertheless, it is also a general plan which may inspire for various type of model warship. Plenty of brass RC kits would be released for TRUMPETER 1/350 & 1/200 series as well.
Photography Device
iPhone 8 Plus On-site View
iPhone 6 Plus Indoors View
Great! It was lovely to see the mother and son stop to watch it.
Exactly😆
Yop
Excellent build, simply excellent.
This is truly amazing, very talented man. Now I need to build one of these beautiful ships. Thank you for sharing this.
i dont mean to be so offtopic but does anyone know a tool to get back into an Instagram account?
I was dumb lost my password. I appreciate any tips you can give me.
@Chase Leonardo Instablaster ;)
@Bo Maddox I really appreciate your reply. I found the site through google and I'm trying it out atm.
Seems to take a while so I will get back to you later when my account password hopefully is recovered.
@Bo Maddox WTF IT ACTUALLY WORKED! I just got access to my Instagram account within about 45 minutes by using the site.
Just had to pay 15$ but definitely worth the money :)
Thanks so much you really help me out !
@Chase Leonardo You are welcome xD
Magnificent! Also very useful, because I'm adapting a 350 scale Scharnhorst
Very very awesome conversion Hugo! However... I don't think the Yamato could go that fast hahaha, well done!
What would be the recommended start mode for this? I'm asking because my motors jump back and forth on my setup but my solder joints are good.
Awesome!!! Congratulations!
Great video. Please upload more content this was very interesting.
Thanks bro, next section would be the 1/200 Bismarck.
Hello. Thank's for that video. Could you do also the battleship Iowa calss? Because I bought the kit and I have ploblems with fitting the shaft : to small ! Thank's in advance.
Is there TAMIYA ENTERPRISE 1/350, TAMIYA MISSOURI C 1991?
Great video and information. I hope to use this as a reference for my rc yacht build.
Great thanks bro, keep going.
Where can I get the motor, mounts and propeller parts?
Cool!
what esc did you used to install 4 motors?because some people says that it is not good to install more than 1 motor in 1 esc?i want to build like that please help me ...
Grandios, nice Work
Hi, how did you connect 18650 batteries in series or in parallel, how many Volts and mAh do they have. Thanks for your reply. Best Regards.
I purchased the kit for the Yamato 1/350 model 78030, and received it sometime in February 2021. I noticed that the brass shafts for the propellers are much shorter then the ones you show in the conversion video, could you please explain, and will the ones I received work just as well.
h Hugo just bought 1/350 Dunkerque, do you do a RC kit for this ship, or do I convert a kit already on the market and which one would you recommend, thks
Hi Marc, certainly we have RC kit for 1/350 Dunkerque. Due to the demand of the market is not huge, we still haven't let it online.
Do you think that a upgrade kit for trumpeter essex will work in hobby boss alaska
What type of glue are you using to attack the metal parts to the plastic?
Great Job!! Congratulations!
Thanks bro!
張大千 mine is still in the box...
Well preserve it, after decades it would become a precious collection :)
Would love to know how the wiring goes for motors to ESC. I have ordered very similar motors and all for my model I am building
beautiful ship..can i ask you?motor,esc,battery and transmitter did you used to it?what amps are they?
Can you show how you wired all the motors together and show how you connecting it to the esc?!?!?
I use to make one...your propulsion system is way better than mine...but mine can rotate the main turrets
The fluffy bear gaming Perfect. Actually, the front turrets are activated by two servos. Considering the video maybe so long that I cut that part😅
張大千 ...oh..I see
Now I am working on the bismark.I managed to get the guns to elevate and turn
The fluffy bear gaming Cool. My project of 1/200 Bismarck from Trumpeter propulsion is ready. Relative video would be uploaded soon.
I will be looking forward for it!
i like it
Dude awesome
Thank you very much for posting good videos! I really appreciate those! Keep posting good videos! I am in Vancouver, Canada. I wish I could see your models. I subscribed your channel. Thanks again.
Great thanks J! We definitely would keep on updating and very appreciate your watching and comments.👍
@@Hugo-ot7xu You are welcome. Thanks for your kind words. I look forward more videos from you.😄
Good work sir,motor connected in paraller or series control by single esc how the wiring..thank you
Well, identify the clockwise and counterclockwise propellers, then testing the motors in the same direction of rotation and mark down the negative and positive pole. Welding the same pole in a single wire then connect to ESC. A ESC of 180A is pretty enough for 180 motor X4.
Could you convert a carrier next?
Es magnifico todo
what type of resisters you are using?
Will the motors work on any 4 shaft warship
what paint and varnish for the hull???
At 2:17, when you were mounting the motor to the brass support, can you tell me what size of screw you used. I have a smilar motor I'm using to convert a plastic patrol boat to RC.
Hi, I haven't double check but I remember it is a standard M2 screw.
Sorry to bug you one last question. What is the module name you used? The blue one behind the motors? I really can't find it :/
That's the ESC, to power up the motor.
@@Hugo-ot7xu thanks man. You're great help. I'm a beginner first ever project at the moment.
I'm not into RC, so I don't know anything and I just stumbled upon this video. Just asking whether if it's possible to like e.g use one motor for two propellers so that the ship moves more "realistically" and not very fast?
U can or just buy an controll with speed limit like my
What is the motor did u use
How do you closed the deck so you can reopen it later? I really need to know. Thanks for the help.
Hi, for No. 78030 I seal the front deck while the rear deck is just dry assembly via its original mechanism. Because for 1/350 scale is not that huge, the kit would not deform so much. But in 1/250 Yamato, I am doing almost the same but utilize magnetic to firmly stick the rear deck and the hull.
@@Hugo-ot7xu oh thanks a lot. But if I seal the front how could I be able to open it, when I need to change batteries etc.
@@IRFSI It depends, from my habits for the maintenance may not requires opening all decks. Say for an extreme example like 1/350 ROMA, it only available for cut off the shape of down bridge for maintenance. So, for battery recharging just a balanced wire could be drag outside is enough. But for such ship the water proof process should be done in a high level. Return to Yamato, the size of opening the rear deck is quite adequate for pulling the battery pack out or ordinary checking or even replace the ESC or motor. All in all, well managing the position of setting each unit before making a final decision is exactly essential.
@@Hugo-ot7xu well if it is possible to recharge it from wire alone, it would be huge help. Then don't need to open all of the deck. Thanks for your huge help ^^
@@IRFSI You are welcome. Exactly, if a ship's waterproof on shafting done reach to a submarine level, it would be an ideal approach for ship to maintain a complete wooden deck. No extra cutting works is required.
Hugo,
Thank you for adding your excellent videos to RUclips! I so enjoy watching them. I just acquired a 1/200 Nichimo Yamato kit. What would you recommend I get to RC it? I got this kit to build again. This kit is re-living my childhood when I purchased and built it in the 1970's. That boat I gave away to a hobby shop when I moved.
I recommend 4motors but bigger ones
I own 4 of them not sure of the name
How did u wire up the motors
Great vidoe i am rc convesion too.Can u share where can get all conversion parts for conversion,specially motor, shaft proppler and stuffing box..thank you
Can you make a tamiya 1/350 HMS king george rc conversion video
Hey!Ive been looking around to convert my fleet. Could you recommend what parts and controls i need. Thanks
They still have some conversation kits on ebay...just look up 1/350 ship conversation kit
cool 😎
Great video buddy. I have a question, I'm interested in the plastic model USS Enterprise air craft carrier made by Tamiya. Could I install a electric motor and a esc in this model to make it a RC ship? Thumbs up on your video buddy.
What about the Yamato guns?
the flying duchman "the Dutchman must always have a captain" yamato "the yamato must always have a warrior at the helm"
what is the name of the song in the background of the video?
故宫的记忆, thanks
Can we use the receiver instead of the ESC?
Hi, receiver is not conflict to ESC. The ESC is power for motors and receiver as well. On the other hand, receiver control the ESC output power via signal wire. I guess you mention for a sort of receiver integrate with ESC, that's available.
Awesome conversion!! I have the old 78014 and I'm petty interested in that RC conversion. Where could I find-buy all those parts?? That propellers, shafts, servos...
Thanks for your watching. Exactly, 78014 is almost the same as 78030. The item could be found on eBay.
Are you selling these as a kit?
Exactly and here is the link, www.ebay.com/itm/292510487432?var=&ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
張大千 还公开承认
I haven't run it yet, but the stuff seems to be of high quality and comes with some things I easnt expecting such as servo linkage, a servo mount etc. I bought mine with the wooden deck detail and man am i glad i did. It is beautiful and fit my #30 Yamato kit perfectly.
Can you explain about the screw attachment? I couldn't catch on it.
Hi, cross screws on the mount and motor while the hollow screws on the brass couplings.
@@Hugo-ot7xu thanks for the reply. But I meant the screws that make it run in water. :) Behind the Y-support.
@@IRFSI For 2mm shaft the propeller does not require the screws, using epoxy to fix it.
@@Hugo-ot7xu thanks for that. Again the kit is super quality, love it and really is quality ^^
Great thanks for your kind words. Best wished for you building a great ship is our pleasure.
excuse me but do you make one for the tamiya bismarck 1:350 scale?
Hello, it is available on eBay via www.ebay.com/itm/1-350-Bismarck-Battleship-Brass-RC-Upgrade-Kit/292515474993?hash=item441b47ee31
great thank you very much!
Great work! Where to buy those metal parts?
Whats the music?
palace memories
Nó có thể bắn ko?
how to connect the four motor in one ESC?
Hi, just sort out the motors' wires via larboard/starboard and test one side of them in correct rotation. For the ESC with just two wires output, we have to weld four power-supply wires into two junctions. Then other opposite two are inreverse, similary, welding four junctions from both side into two junctions to connect with the ESC.
thank you...
what is the name of ESC did you use?
@@keveninocencio2230 New Rain, very popular in our domestic market, cheap but reliable.
Now lets see it in the sea.
That's tough my friend, even the 1/250 Yamato I wonder it would sink in mins.
@@Hugo-ot7xu Thats what I thought mine would have done. Tamiya makes good solid structures that stay in place.
facebook.com/xchrisx.xtaylorx/videos/1956161064497044/
Wapik
172o
Lest we forget
I love reading people's comments I just can't help myself. It's like an addiction. So in honor of those comments that I have read, I have decided to write my own comment. And it's all for you. I hope you enjoy reading my comment as much as I have enjoyed writing it. It's not an interesting comment, but I'm pretty certain you have read the comment up to this point, so you may as well just keep reading right down to the end. And also thank me for wasting your time cause this is very useless
I only scrolling because im looking where i can buy those but he build it so
jkjk