SeeSii Cordless Impact Drill Review 738ft/lbs (WH760)

I unbox, review, and test the SeeSii WH760 1/2" drive cordless impact drive wrench. It has 1000Nm / 738ft-lbs. I saw it did well on the torque test channel so I wanted to try it out. I did real world testing on all three settings. It comes with two rechargeable batteries, and for the price you can't beat it. I found that it performed well. I am using it all the time so that is a plus. I don't think you can go wrong. There is a current Amazon deal and you can just click the box to get it.
Amazon.com: amzn.to/3X0TxsR
Amazon.ca: amzn.to/4aGt0nH
As an Amazon affiliate I may earn a small commission on a qualifying purchase, this does not affect your price at all :) Please consider supporting the channel :)
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results.
#garageking #cordlessimpactwrench #cordlesstools #diyautorepair

[@ls_812]

Torque Test Channel has done several reviews on SeeSii and they tested very well on their dyno.

[@GarageKing]

Yes, that actually one of the reasons I did buy it, and it does work great. I have used it for a number of repairs now and no issues. Thanks for the comment :)

[@thebunz7]

lug nuts are not hard to take off. you can change the tire with the provided bs kit with car. You are blind and have no idea of the concepts at hand

[@GarageKing]

You can take any fastener out by hand, that's why they make ratchets and breaker bars, but this is a common tool used to change over tires because it saves time. If you are changing many tires per day you don't want to look around for the included kit and do them all by hand.

[@stefanczechorskidds8435]

I think that's a good tool to keep in the car tool kit ; with the lug size socket attached.

[@GarageKing]

You are right and good thinking. It's not that expensive, and could sure come in handy, thats for sure. Appreciate the comment and hope you had a good weekend

[@fasteddie5388]

I had the one that put out 400 and some ft lbs and it was a complete POS. Sockets barely fit and after a few hard uses it doesn't work for longer than 5 seconds and it just quits. After 20-30 seconds it'll work again but the same thing, only for a few seconds and quits.
It's worthless. If you want a cheap reliable brand go with hercules brand from harbor freight.

[@GarageKing]

400 is pretty low, this one was a major improvement. It actually did really well on the torque test channel. That's why I bought it.

[@michaeltammaro482]

Hmmm. Got mine, exactly the same setup for $129 off of Amazon.

[@GarageKing]

Yup, checked the link, its 139 now so maybe it went up $10? It did well on the torque test channel and that's why I got it. Used it today on my VW : )

[@lorrynortheastguy4787]

How do you rate that knuckle you used at the end for working in tight spots? I saw them on fleabay but thought with the hammer action they would maybe unreliable, it seemed OK with what you did, I just wondered.

[@GarageKing]

Hey there, the swivel socket, or knuckle I used is awesome and I have used it for years on many different high torque impacts. It is a Snap On though.....

[@lorrynortheastguy4787]

@@GarageKing Well I'm from UK we have snap on but the one I saw wasn't, but food for thought, thanks for answering I just assumed being a moving part it would take a beating from the hammering action thanks again for answering

[@GarageKing]

@@lorrynortheastguy4787 No problem at all, and I know the Snap On ones work well, they are not cheap, but I have never broken one and I use them a lot.

[@Sioreji]

Very nice repair step by step!

[@GarageKing]

Thanks 👍