I prefer the OEM fit and finish. Clean tidy and covered under warranty. And you can dim them with the dimmer switch. Im still under warranty still so dont wanna void it. I did my OEM kit today and they look amazing. Now I gotta figure out the rear. I wish you would have hardwired them to show that route. In my opinion the rear lights would probably look better if you mount them under the back of the front seats if you can find a spit to mount them anyways. That reflection would drive me crazy.
The one thing I did that increased the difficulty was buy aluminum bar stock and cut to fit the brackets under the drivers and passenger seat. It gives a good flat place to mount, you can angle it for the best lighting, and it isn't blocked by the rear passengers' legs. Everything else was basically exactly the same as this video. It was one of the first things I did when I got my VA. I did however choose to get some amazon ones that are controlled by a bluetooth app and have all colors/patterns/programmable/etc.
Instead of the glue I would of bonded the led straps onto some velcro to make it stick to the carpret. But other then that awesome job. Not a fan of cutting into factory harnesses. And this works out.
Awesome! And not too sure. Getting this car really stretched my budget thin so it's really hard to do anything with how expensive parts are for these things.
Honestly it's a close call. I like them both a lot. I'm thinking about making a video on my thoughts comparing the two. But I have definitely considered the sti drivetrain. Basically, if the transmission explodes I'll probably do it but I probably won't do it until that happens lol
For sure. You can always get an add-a-fuze and wire them into the headlight fuse or the wiring for the parking lights. Shouldn't be too hard just finding the correct wire.
@@StreetInspired1 hmm maybe wiring a dimmer in there is the way to sway me. I'd have to find a dimmer that looks good and can be tucked in there attached, don't really want it dangling. Love your work by the way!
Some of the light strips are controlled via an app to change colors etc. Possibly have the ability to dim from the app. I have seen others mention govee as a brand they have used
When I started to do some LED DOME LIGHT mods to my 2022 WRX, I blew a lot of fuses. This video is more of a hack versus an OEM install. I prefer the Subaru illumination. Its clean and plugs directly to illumination controls. Sorry dude but no thanks.😢
No offesne but calling amything besides OEM a "Hack" would illiminate a lot of really cool stuff. Blowing fuses while installing a dome light is definitely user error. If you're having issues like that I would disconnect the battery anytime you're messing with wiring.
@@StreetInspired1 the electronics on the 2022+ WRX are more sensitive with drawing current and amperage. That said, any tapping of wiring or existing is a risk, which is the main concern. Not to mention And it wasnt user error I had the LED lights done at a reputable automotive pro shop that works on alarms, stereo installs.
I prefer the OEM fit and finish. Clean tidy and covered under warranty. And you can dim them with the dimmer switch. Im still under warranty still so dont wanna void it. I did my OEM kit today and they look amazing. Now I gotta figure out the rear. I wish you would have hardwired them to show that route. In my opinion the rear lights would probably look better if you mount them under the back of the front seats if you can find a spit to mount them anyways. That reflection would drive me crazy.
Looks great! I need to add that to my bucket list for my VA.
The one thing I did that increased the difficulty was buy aluminum bar stock and cut to fit the brackets under the drivers and passenger seat. It gives a good flat place to mount, you can angle it for the best lighting, and it isn't blocked by the rear passengers' legs. Everything else was basically exactly the same as this video. It was one of the first things I did when I got my VA. I did however choose to get some amazon ones that are controlled by a bluetooth app and have all colors/patterns/programmable/etc.
Hey buddy i liked that smith and Wesson sitting in your arm rest this is why I love Pennsylvania!!!
This actually looks pretty good. I might have to take a ride to Walmart to see if they have any of those lights.
Looks good 👍
Instead of the glue I would of bonded the led straps onto some velcro to make it stick to the carpret. But other then that awesome job. Not a fan of cutting into factory harnesses. And this works out.
I'm 99% sure that OEM connector that's inside the center that isn't plugged into anything is for the optional CD player! 5:10
Sort of like rocket science but not really lol. Good job man. Definitely a more cost effective way to have brighter lighting. Front and rear.
Is the center console bigger on the VB? Jelly that you can fit your freedom dispenser in there 🤣
Not sure that it's any bigger. It might be the same size honestly 😅
Almost as egregious as the $108 LED dome lights the OEM offers!
What is that plug under the cup holder for I don’t have that
You think that wire might be for the future DCCD ?
Nice! Gonna add this to the list! You have a horn video coming?
Awesome! And not too sure. Getting this car really stretched my budget thin so it's really hard to do anything with how expensive parts are for these things.
how do you like the new wrx vs the old, and have you thought about STI drivetrain :) ?
Honestly it's a close call. I like them both a lot. I'm thinking about making a video on my thoughts comparing the two. But I have definitely considered the sti drivetrain. Basically, if the transmission explodes I'll probably do it but I probably won't do it until that happens lol
I was told the oem lights were causing shortages when I tried to purchase it when I first ordered my 2022 wrx. Anyone hear anything about that?
what oem lights?
Can it be wired so that they only turn on when headlights are on?
For sure. You can always get an add-a-fuze and wire them into the headlight fuse or the wiring for the parking lights. Shouldn't be too hard just finding the correct wire.
Really with the power button was able to be twisted so you can dim the lights. I'd consider it then lol
I agree that would be really nice. The lights aren't aggressively bright but having control or wiring into a dimmer switch would be great!
@@StreetInspired1 hmm maybe wiring a dimmer in there is the way to sway me. I'd have to find a dimmer that looks good and can be tucked in there attached, don't really want it dangling. Love your work by the way!
Some of the light strips are controlled via an app to change colors etc. Possibly have the ability to dim from the app. I have seen others mention govee as a brand they have used
Do you happen to have a link for those lights?
I actually got them at my local Walmart in the auto accessories area
@@StreetInspired1 thanks man keep up the good content
we came a long way from our days of twisting spliced wires together and just electrical taping them bitches 🤣
Lmao twisting and heat shrinking isn't too much better but I'm too lazy to buy connectors 😂
Geez all that for led lights i commend you
When I started to do some LED DOME LIGHT mods to my 2022 WRX, I blew a lot of fuses. This video is more of a hack versus an OEM install. I prefer the Subaru illumination. Its clean and plugs directly to illumination controls. Sorry dude but no thanks.😢
No offesne but calling amything besides OEM a "Hack" would illiminate a lot of really cool stuff. Blowing fuses while installing a dome light is definitely user error. If you're having issues like that I would disconnect the battery anytime you're messing with wiring.
@@StreetInspired1 the electronics on the 2022+ WRX are more sensitive with drawing current and amperage. That said, any tapping of wiring or existing is a risk, which is the main concern. Not to mention And it wasnt user error I had the LED lights done at a reputable automotive pro shop that works on alarms, stereo installs.