Nice practical video, with all the peaks of these tiny pedalboards highlighted. I glued cane-tips to reach of the standard feet to raise the board by an extra 5mm+ and get enough clearance to better mount three per supply underneath. They original feet are not screwed in and removable but rivetted and irremoveable and I didn't want to start drilling them out.
Is the DC5 the same type of supply as the Adam? I have a difficult germanium fuzz on my nano+ pedalboard and want everything to be as quiet as possible. Would you advise the Adam or the DC5? Thanks in advance for your reply.
If you need more isolated outlets than 4 please take a look at our DC5. This one apart from one more isolated tap also has a toroidal transformer, more power and more voltage options incl. one dedicated 18V setting on the middle outlet. Both ADAM and DC5 are now GRIP compatible.
Yes you can. You can power two or three pedals of a single outlet unsing our Split Flex or 3-way daisy chain respectively. Just ensure you don't overload the outlet. The sum of current drawn by each connected pedal should stay below the limit of the outlet used.
you should really provide instructions with your feet kit. I have bought a pt mounting kit to raise the rear of my pedal train but have no idea how to change the feet out
Nice practical video, with all the peaks of these tiny pedalboards highlighted. I glued cane-tips to reach of the standard feet to raise the board by an extra 5mm+ and get enough clearance to better mount three per supply underneath. They original feet are not screwed in and removable but rivetted and irremoveable and I didn't want to start drilling them out.
Is pedaltrain metro 24 compatible with cioks dc7?
Whats the screws spec? I've lost mine and now want to attach power supply to my pedaltrain...
Is the DC5 the same type of supply as the Adam? I have a difficult germanium fuzz on my nano+ pedalboard and want everything to be as quiet as possible. Would you advise the Adam or the DC5? Thanks in advance for your reply.
What's "down" with the two Adam 9/12v switches? Adam side up or back side up? There's no marking on the unit. Confusing.
Will this be able to power up HX stomp xl?
Can the Adam Link single 9v 250mA output enough to power Nux Cerberus?
Wondering if the Fuel Tank or Fuel Tank Jr from T-rex will fit under the nano +? The fuel tank jr has 5 outputs and ADAM's only got four!
If you need more isolated outlets than 4 please take a look at our DC5. This one apart from one more isolated tap also has a toroidal transformer, more power and more voltage options incl. one dedicated 18V setting on the middle outlet. Both ADAM and DC5 are now GRIP compatible.
Adam is awesome power supply. Small and compact. 👍
which power supply would you recommend for a metro 24? I have 6 pedals so far and plan on getting more. Thanks!!
Dc 7 or eventide powermax
if i have an Adam with 4 outputs can i run maybe 6 pedals by daisychainig two?
Yes you can. You can power two or three pedals of a single outlet unsing our Split Flex or 3-way daisy chain respectively. Just ensure you don't overload the outlet. The sum of current drawn by each connected pedal should stay below the limit of the outlet used.
Yes, no problem.
Would a Baby fit under a Metro?
Will the dc5 fit under my pt mini?
Yes, it will.
How about Ciosk 4 will it fit under Nano+? Thank u
Really you have to move it around because of magnetic hum
Does the AC 10 fit under a nano+ ?
Sorry, this is a no.
Why not use the Velcro to attach the power supply underneath
HE EXPLAINED THAT
Will the DC 7 fit the Nano+?
Gro Skunk yes
you should really provide instructions with your feet kit. I have bought a pt mounting kit to raise the rear of my pedal train but have no idea how to change the feet out
Have you found out yet? I have the same problem right now :(
@@rtxf I had to use a rivet gun if I recall,
@@rune288 I just glued the rubbers on, lets hope it will stay
will a 4mm or 5mm drill bit work?
You can start with4mm and if you have drilled super precisely it'll be ok. If not you can enlarge the holes to 5mm then.
4mm worked great for me, I just got it mounted. Thanks!
No PDF Template on the website BTW - '404' page not found - cause the template on the black matt laminated card makes a boring job harder - well done
And get rid of 'smug bloke' - I don't care if he works for you - no more videos for him