@@mikesmith-wk7vy burglars only have approx. 8 to 12 min before they're caught!!! The amount of time it takes to lock pick, they're just going to move on anyway
Oh yeah, the Schlage deadbolts will last a long time. The Schlage locks on my house have lasted 25 years, they have gotten a little worn and stiff, so I recently changed all the pins, and replaced all the keys and they work as good as ever.
I contacted the local locksmith by email today, asking if his locks had metal internals vs plastic at big box stores and he told me that there has not been much of a difference between big box stores and what he sells for 10 years. I asked about the B60N or would he recommend something else, he said it is a decent residential system.
I had Kwikset for 24 years. The lock mechanism breaks, the finish comes off every single time. The only thing not crap about it is the warranty, which you will definitely use.
I have a heavy stainless steel security door. When you turn the key to enter, the lock stays unlocked unless you turn the key back to lock it. How can I make it so the the lock automatically relocks after you unlock it?
I have a Schlage deadbolt single cylinder. There are no allen screws behind the plate. There is a small hole on the side of the thumb knob that does not have an allen screw in it. Was a pin driven into this hole to keep the knob on and if so is there a non-distructive way to remove the knob. The screws to remove the lock are behind the trim plate behind the knob.
Additionally, the Schlage has armor to prevent drilling out the mounting bolts with regular HSS drill bits, and there's usually a hardened steel plate set into the core face to prevent drilling the shear line.
Cobalt drill bits aren't hard to come by though and those are made to drill through high carbon hardened steel. So I don't know if it would be much help, it would certainly buy you time though.
BION, I use a Spyder Mach Blue 1/16 x 2 1/2 inch bit for drilling most locks. Yes, it's tiny, but ya can't beat it for strength and precision, especially when you hit the sweet spot.
Sadly that does very few any good. No one drills a lock when breaking in, not well anyway, so the only people this stops are locksmiths unable to open the lock through other means. Not to mention it doesn't work lol. Medeco will keep people from drilling effectively, schlage does not. Since lishi tools hit the scene drilling a lock is very rare even for new smiths.
Ok! Thanks for the info on the B60N. I'm about to install a new side entry door for my MIL, and a new door for the detached garage. I'm also replacing doorknob/lock and deadbolt on the front door, all keyed the same. These all have the original ('50s era) Kwickset doorknob/lock and deadbolts. Now what is the best residential entry door knob/lock? I'm assuming it's a Schalge, but which one?
Dead bolts are very good locks. Actually, I use it for alternate entry points. But for main entrance, I prefer to use a mortise lock with high security profile cylinder.
I need to buy 3 deadbolts right away. Can you tell me what the difference between Home Depot Schlage B60N deadbolts as I can't wait for the video. By the way when I was on the Schlage web site their links to where to buy them were for Amazon and Home Depot.
I got locked out of my apartment using a kwikset , thing only lasted 3 years... the key one day would not turn ,... it's like someone switched the tumblers I'll give Schlage a try..
Can this deadbolt in the garage and an ENCODE smart deadbolt on the front door be rekeyed to the same key? This is 6 pin and the ENCODE cylinder is 5 pin? Also, Where can a homeowner get the box with the lock bits (Spools?) to rekey the locks? Answer found : Amazon
I Like The Schlage B660 Deadbolt Because it Has A Solid Housing Not Hollow . Plus It Has A Ice Pick Shield . I Use Them On My House Keyed Alike , And install Them For Customers.
I just installed same deadbolt Key turns and locks from outside and key comes out Cannot unlock from outside and pull out key Interior handle does not work at all - is locked
Is this for a specific price point? Because I'm surprised he mentioned it above the Medeco Maxxum Deadbolt system. Upwards of $250, but it took a locksmith an hour and a half to drill through my old one when I lost my apartment key. I doubt this Schlage would stand up to that.
The locksport community has a 'blue belt' rated lock that's a Paclock 90A Pro that's 7 security pins that we pick and gut for fun. The higher rated pickers are going through Medeco locks. Take that Schlage lock to a locksport meetup and someone will open it like they have the key.
Hi There. I have an ellipse MARKS doorknob on the door from our bedroom to hallway. A few of us have tried but are not able to find the detent (hidden lever) to pull apart the 2 sides of the doorknob. There is a hole for a pin but it doesn’t lead to anything (it’s blocked even if turning both ways). Any ideas on how to open it?
Kwikset locks are easy to rake open new from the store right out of the box. opened a dead bolt and a knob lock within seconds after unboxing them. Schlages are way better I totally agree.
Wasn’t there or is there a passage lock that also doubles as a deadbolt? I rent and can’t drill any holes, but I would like a deadbolt if possible. I remember seeing adds a few years back but cannot remember the company.
I bought a new Kwikset Knob and deadbolt from my local box store. had them delivered. and after opening the packages, i raked them both opened within moments. less than 5 seconds. using a 5 peak wave rake. total crap .
Hey, Mr. L. I really like your channel. Locks are mesmerizing and utterly fascinating. So, I want to change the handleset on my front door. The current handleset has a single deadbolt only. What I would like to buy is a handleset where you have a separate deadbolt above the handleset AND a locking mechanism WITHIN the handleset itself. Typically, I have seen these with 2 buttons on the door flange so you can select whether the handleset is locked or unlocked when the door is closed OR there is a selector on the rotor on the inside of the door where you again can select lock or unlock on the handleset. When I am Googling or in a store what kind of handleset should I be looking for?
I'm a commercial locksmith that swears by Schlage products. Although I do like the B60N, I still say that the B560 is the best deadbolt for your money. Don't waste your money on the B660 though.
My go to Deadbolt is the Schlage B660. Note: I just found out a huge difference between the Locksmith Supplier / Contractor B60N and the Home Depot B60N. Video soon!
I need to open TWO locks at my condo, main front door, and actual door to my unit. The main front door can be opened with my iphone if the dial code of my unit is activated. So is there a lock that can activate my main front door code and also my actual door to my unit???
Just read the instructions lol. I work in a hardware store. Most people don't read, and come back cuz the bolt is the wrong length. OR they need the handle for the right hand or left hand door.
I do home improvements including door installation, I always tell the homeowner that Schlage is the only good residential one. If the striker is slightly hitting the plate after figuring out where it's hitting you can take a Dremel and grind a little bit off the edge of the striker plate. If you're only removing a little bit you can't even talk but if it's any worse you have to remove it and relocate it in the proper place. If you need to move the striker plate just remove the screws and hammer golf tees into the holes, then score of the golf tees and break them off. This will keep the screws from following the existing holes. This technique also fixes screw holes for hinges that are stripped out. They make a special drill bit that will perfectly center the hole for the striker plates and hinge plates. This is well worth the $5 price to be able to perfectly center the hole for the screw. For some reason Home Depot does not carry this drill bit but Lowe's does. If Home Depot does have it I've never been able to find it. Avoiding over tightening all the installation screws is definitely the key to not having the lock binding up.
@@BallisticSuperiority I've not encountered any holes small enough for toothpicks but I'm sure that would work. Another thing that I have found out works really well for filling in the holes are chopsticks like the ones you get at Chinese restaurants. Actually I'll use any wood that I can Whittle down and Hammer into the whole it all works. Although I think hardwood works better than softwood obviously but softwood has even saved the day for me a few times.
I have a question I’m gonna have to replace a deadbolt because no one No one knows where the keys are, so do we have to put something in the screw holes to hold that new deadbolt in so it won’t fall out
What is the best handleset for very cold weather? My weiser set latch always seems to freeze up in the cold weather. They sent me a rubber gasket set that is supposed to fix it but I still have issues.
I have an Airbnb property that has two doors to get inside. The first door is a metal security door with two locks to unlock. The second wooden door behind the security door also has two locks to unlock. Is there a way to make it where a person can unlock/lock one lock to open/lock all four locks at the same time?
Thanks for your informative video. Unfortunately, however, you did not answer a question I have. My son is incapable of remembering to turn the locking mechanism when he leaves the house. I thought it would be a simple matter to install a keyed, non-pushbutton lock and doorknob set (not a deadbolt) that automatically locks when the door is closed behind you without having to remember to push or turn a button. Apparently, no such thing exists, which surprises me. I’ve already talked to a locksmith and been to Lowes, Menards and Ace Hardware, but no luck. I can’t believe what I’m looking for does not exist. Can you help me?
Is this the same B60N model sold in big box stores?Because I’ve heard that those Schlage residential deadbolts have significantly decreased in quality(e.g. use plugs made from pot metal(As opposed to brass, utilize icepick protectors made from plastic, and have housings with hollow areas).
I just purchased a B60N from Home Depot and I will compare it to the B60N from a Locksmith Supplier. I think you are correct. Most of the major hardware stores get the CRAP version of the locks.
@@24hrMrLocksmith I have noticed that the packaging at the box stores are made in China but the ones I buy from locksmith suppliers say north America aka Mexico. I recently had to buy an extra schlage knob at home depot to finish a job and noticed it had identical latch to Defiant as did the kwikset. Really sad
@@cybersonic8472 I just purchased B60N from Home Depot and I am doing a video on the comparison between Locksmith suppler B60N and Big Box Hardware B60N
Ok, door plate is square - how to change out to the round edge to square? There is a silver metal ring on your table and in my kit> what is it for? There is a brass colored ring what it for? Haven't even go to the frame plate issues yet TX
The safe is a time master. I hope this helps, so I can get an answer that helps me to open it. The safe opened the beginning of this year, but when I got back from trip I couldn't open it. I found that the battery on the positive side had corroded.
Any update on the Locksmith Supplier / Contractor B60N vs. the Home Depot B60N? I picked up a Mr. Locksmith membership to see if you had the video you teased on this topic in the member section, but I didn't see one. I'm having trouble finding the six-pin version you featured in this video and would love to buy a few through you if possible.
Hey, where can I buy this lock since you said the big box versions aren't the same? And I can't find the comparison video you mention in this one, did you make that? You talked me into this lock but now I don't know which version to buy? :)
Why is the hole in the door so large? It seems like a design flaw. The amount of surface area for the lock to attach to, is really minimal. The hole should maybe be 1/3 of the current diameter.
@@24hrMrLocksmith I have an old fingerprint door knob lock that I really, really like and I don't want to replace it but it is not a deadbolt. I reinforced the strike plate and hinges so I'm not worried about those parts, do you think the TYPE of bolt on my current lock will hold up well against a kick-in or is a deadbolt my only option? I really don't want to get rid of my current lock but I an concerned about a kick-in.
@@24hrMrLocksmith For Primus its easier to get bump-keys for. There are only 4 different side-millings. The older Medecos manufactured prior to 2006 like the Biaxial and the M3 can be bypassed easily with a sharpened screwdriver which can turn the tailpiece... but then again ANY deadbolt with a thumbturn can be bypassed with an under door tool.
Few questions: What knob would you recommend? And is it generally advised to have a knob and deadbolts all have different keys? I would like to have all 3 of my household doors use the same key, but that seems less secure. Great video!
@@24hrMrLocksmith So, your saying, for entry doors, (residential in my case) skip paying for key in knob sets? Just go with the current top choice "Schlage B60N" and call it a day? I never thought about that option!? Sorta like bathrooms with two sinks.. Your paying twice for the same service.. Brilliant!! One less thing to have issues with later.. 👍👍
Well, somebody's spelled it "Schalge" in this video. I suspect from the correct spelling, "Schlage", and from the time the company was established that this could be a German name. So my best guess at a pronunciation would be a 'sh' sound followed by 'lager' like the beer (do you have lager beer in USA and/or Canada?) So, you could say 'Shlager' with a long 'ah' sound on the 'a' and a hard 'g'.
Everest locks super easy to bump with the right key , it opens first time consistently with barely a light bump, better get a lock with spool pins across the board! Not to mention I actually filed down a sc1 key to fit a everest and cutting the shoulder down to add the sixth pin , it not only worked on the outside doors but my apartment as well, the code was close enough to work both, I tried it on a vacant apartment next door and it didn't work!
![[1234] “The Best Door Lock” According to NYT Wirecutter](http://i.ytimg.com/vi/WpbKOL1cM34/mqdefault.jpg)
![[904] The “Pros" at Consumer Reports Couldn’t Pick This (Reverse Sidebar SmartKey)](/img/1.gif)
Oh, they're great until you hear........."this is the lock picking lawyer".............
Yea that one might take him a whole minute to pick the 6 pin
Funny one .I watched LPL and he opened this lock in minutes. he is good.
Can he nondestructively pick a Bowley lock yet? I mean, he will be able to some day, but it may still keep him out for a time.
@@mikesmith-wk7vy burglars only have approx. 8 to 12 min before they're caught!!! The amount of time it takes to lock pick, they're just going to move on anyway
This video needs updated as Schlage has decided to no longer include the anti-pick shield (shroud) with the B60 anymore 🤬
Wish there was a link to the right product to get. I get soo many different results in looking for this item
Oh yeah, the Schlage deadbolts will last a long time. The Schlage locks on my house have lasted 25 years, they have gotten a little worn and stiff, so I recently changed all the pins, and replaced all the keys and they work as good as ever.
Why are the deadbolts always so short?
I contacted the local locksmith by email today, asking if his locks had metal internals vs plastic at big box stores and he told me that there has not been much of a difference between big box stores and what he sells for 10 years. I asked about the B60N or would he recommend something else, he said it is a decent residential system.
I had Kwikset for 24 years. The lock mechanism breaks, the finish comes off every single time. The only thing not crap about it is the warranty, which you will definitely use.
I have a heavy stainless steel security door. When you turn the key to enter, the lock stays unlocked unless you turn the key back to lock it. How can I make it so the the lock automatically relocks after you unlock it?
I have a Schlage deadbolt single cylinder. There are no allen screws behind the plate. There is a small hole on the side of the thumb knob that does not have an allen screw in it. Was a pin driven into this hole to keep the knob on and if so is there a non-distructive way to remove the knob. The screws to remove the lock are behind the trim plate behind the knob.
Would you consider doing a video on the theory of residential security regarding both deadbolts or knobs?
Additionally, the Schlage has armor to prevent drilling out the mounting bolts with regular HSS drill bits, and there's usually a hardened steel plate set into the core face to prevent drilling the shear line.
Cobalt drill bits aren't hard to come by though and those are made to drill through high carbon hardened steel. So I don't know if it would be much help, it would certainly buy you time though.
BION, I use a Spyder Mach Blue 1/16 x 2 1/2 inch bit for drilling most locks. Yes, it's tiny, but ya can't beat it for strength and precision, especially when you hit the sweet spot.
Sadly that does very few any good. No one drills a lock when breaking in, not well anyway, so the only people this stops are locksmiths unable to open the lock through other means. Not to mention it doesn't work lol. Medeco will keep people from drilling effectively, schlage does not. Since lishi tools hit the scene drilling a lock is very rare even for new smiths.
si WEISER a good brand?
@randomrazr not really, no. In my opinion...mostly garbage.
Ok! Thanks for the info on the B60N. I'm about to install a new side entry door for my MIL, and a new door for the detached garage. I'm also replacing doorknob/lock and deadbolt on the front door, all keyed the same. These all have the original ('50s era) Kwickset doorknob/lock and deadbolts.
Now what is the best residential entry door knob/lock? I'm assuming it's a Schalge, but which one?
Dead bolts are very good locks. Actually, I use it for alternate entry points. But for main entrance, I prefer to use a mortise lock with high security profile cylinder.
What is your favorite company for mortise locks
Never heard of mortise lock. Where to find it and name
@@andershilmo1866 in Puerto Rico I use Toledo Locks. Mortise Lock for main entrance with High Security European Profile Cylinder.
Note: I just found out a huge difference between the Locksmith Supplier / Contractor B60N and the Home Depot B60N. Video soon!
I'm waiting on that video!!! Where can I buy the b60n sc4?
I need to buy 3 deadbolts right away. Can you tell me what the difference between Home Depot Schlage B60N deadbolts as I can't wait for the video. By the way when I was on the Schlage web site their links to where to buy them were for Amazon and Home Depot.
the Hardware store B60 has 5 pins (SC1), whereas the Contractor B60 has 6 (SC4).
or, at least, that is what i noticed...
Still wanting to hear the difference on these!
In your opinion, what are the best gun safes out now? We appreciate all your hard work and knowledge... Thank you...
I got locked out of my apartment using a kwikset , thing only lasted 3 years... the key one day would not turn ,... it's like someone switched the tumblers I'll give Schlage a try..
Can this deadbolt in the garage and an ENCODE smart deadbolt on the front door be rekeyed to the same key? This is 6 pin and the ENCODE cylinder is 5 pin?
Also, Where can a homeowner get the box with the lock bits (Spools?) to rekey the locks?
Answer found : Amazon
Just put in a supposedly mid grade Weiser last night. Total garbage. Screw hole alignment was awful. Waste of $60. Now I’m here. Thanks for the info.
I like Medeco M3 for residential use. Only trouble is getting keys copied.
Key Control is one of the major strengths of the Medeco M3.
Isn't 6 pin Schlage sc4 keyblank?
I Like The Schlage B660 Deadbolt Because it Has A Solid Housing Not Hollow . Plus It Has A Ice Pick Shield . I Use Them On My House Keyed Alike , And install Them For Customers.
I just installed same deadbolt
Key turns and locks from outside and key comes out
Cannot unlock from outside and pull out key
Interior handle does not work at all - is locked
I took it off and put back on and it works - strange
Is this for a specific price point? Because I'm surprised he mentioned it above the Medeco Maxxum Deadbolt system. Upwards of $250, but it took a locksmith an hour and a half to drill through my old one when I lost my apartment key. I doubt this Schlage would stand up to that.
@@satoshislim863 I have videos on the best High Security Deadbolts.
The locksport community has a 'blue belt' rated lock that's a Paclock 90A Pro that's 7 security pins that we pick and gut for fun. The higher rated pickers are going through Medeco locks. Take that Schlage lock to a locksport meetup and someone will open it like they have the key.
Locksport is lots of fun and yes, most of them can pick these locks.
Great videos! Can you recommend a quality outdoor residential lockbox? I have a GE Supra that supposedly can be drilled open in 20 seconds!
thanks for the recommendation. is there a similar recommendation for entry door knob lock? thanks
All entrance door knobs / levers have many security vulnerabilities. Get a good quality deadbolt and Strike plates.
@@24hrMrLocksmith Thanks, very helpful.
All my locks are 6 pin key and knob are grade 2 knob and deadbolt are keyed the same. Sometimes I use the best a2 sfic.
You can have a million dollar lock, but if your door jam is wood and the windows are glass, it’s silly.
Hi There. I have an ellipse MARKS doorknob on the door from our bedroom to hallway. A few of us have tried but are not able to find the detent (hidden lever) to pull apart the 2 sides of the doorknob. There is a hole for a pin but it doesn’t lead to anything (it’s blocked even if turning both ways). Any ideas on how to open it?
Why did you pick the B60N over the Bowley? Is it because the Bowley is a special order (can't be found in your typical big box store)?
Parts and long term reliability.
Kwikset locks are easy to rake open new from the store right out of the box. opened a dead bolt and a knob lock within seconds after unboxing them. Schlages are way better I totally agree.
@Mrlocksmith do you still recommend this lock or is there a newer version?
Almost any Schlage product is good.
Wasn’t there or is there a passage lock that also doubles as a deadbolt? I rent and can’t drill any holes, but I would like a deadbolt if possible. I remember seeing adds a few years back but cannot remember the company.
I bought a new Kwikset Knob and deadbolt from my local box store. had them delivered. and after opening the packages, i raked them both opened within moments. less than 5 seconds. using a 5 peak wave rake. total crap .
Hey, Mr. L. I really like your channel. Locks are mesmerizing and utterly fascinating. So, I want to change the handleset on my front door. The current handleset has a single deadbolt only. What I would like to buy is a handleset where you have a separate deadbolt above the handleset AND a locking mechanism WITHIN the handleset itself. Typically, I have seen these with 2 buttons on the door flange so you can select whether the handleset is locked or unlocked when the door is closed OR there is a selector on the rotor on the inside of the door where you again can select lock or unlock on the handleset. When I am Googling or in a store what kind of handleset should I be looking for?
To bad channel is to cool to answer questions. Maby this video is sponsored
@@leavealone5247 What are you trying to say?
What about a Schlage bump key?
good to know, thanks
I'm a commercial locksmith that swears by Schlage products. Although I do like the B60N, I still say that the B560 is the best deadbolt for your money. Don't waste your money on the B660 though.
My go to Deadbolt is the Schlage B660.
Note: I just found out a huge difference between the Locksmith Supplier / Contractor B60N and the Home Depot B60N. Video soon!
Is there really that big of a difference between schlage and those $8 or $10 locks??
What about for the metal doors? What’s a good door knob? Or are they the same for the wooden doors?
I need to open TWO locks at my condo, main front door, and actual door to my unit. The main front door can be opened with my iphone if the dial code of my unit is activated. So is there a lock that can activate my main front door code and also my actual door to my unit???
Anything is possible $$$$
Have you sent one of these to LockPickingLawyer?
Mr locksmith, soo you got me sold on these for home, any chance they can all be keyed alike or purchased by code for same key??
Could you tell us how you make the wooden practice jig for the locks?
I'm new to your channel. One of your older videos recommended the abloy protec 2 over this. Has that changed?
I saw that as well! I don't like to see someone give a different option and not explain why!
Just read the instructions lol.
I work in a hardware store.
Most people don't read, and come back cuz the bolt is the wrong length.
OR they need the handle for the right hand or left hand door.
I see you have reviewed a few keypad locks, but what is your opinion on the best key[ad lock??
Desktop practice doors what are they called
I do home improvements including door installation, I always tell the homeowner that Schlage is the only good residential one.
If the striker is slightly hitting the plate after figuring out where it's hitting you can take a Dremel and grind a little bit off the edge of the striker plate. If you're only removing a little bit you can't even talk but if it's any worse you have to remove it and relocate it in the proper place.
If you need to move the striker plate just remove the screws and hammer golf tees into the holes, then score of the golf tees and break them off. This will keep the screws from following the existing holes. This technique also fixes screw holes for hinges that are stripped out. They make a special drill bit that will perfectly center the hole for the striker plates and hinge plates. This is well worth the $5 price to be able to perfectly center the hole for the screw. For some reason Home Depot does not carry this drill bit but Lowe's does. If Home Depot does have it I've never been able to find it. Avoiding over tightening all the installation screws is definitely the key to not having the lock binding up.
use super glue to secure, no golf? thin wood branches work to tighten as well.
I use toothpicks for smaller diameter holes.
@@BallisticSuperiority I've not encountered any holes small enough for toothpicks but I'm sure that would work. Another thing that I have found out works really well for filling in the holes are chopsticks like the ones you get at Chinese restaurants. Actually I'll use any wood that I can Whittle down and Hammer into the whole it all works. Although I think hardwood works better than softwood obviously but softwood has even saved the day for me a few times.
is WEISER no good?
I have a question I’m gonna have to replace a deadbolt because no one No one knows where the keys are, so do we have to put something in the screw holes to hold that new deadbolt in so it won’t fall out
how can i determine if a Schlage b60n deadbolt has a 5-pin or 6-pin cylinder?
Assume no descriptive literature answering that question.
Will the schlage commercial locks work for residential?
I prefer to use Commercial Schlage B660 Deadbolts in Residential and Commercial doors.
@@24hrMrLocksmith Are these available somewhere online? I would like to change mine out.
@@D0TELL contact your local locksmith or Locksmith Supplier
@24hrMrLocksmith Just so I know if I'm getting over charged. How much does the Schlage 660 cost?
Thank you
Thanks for the info
What smart locks fit a 2 1/2 “ thick door?
Most will need an extension kit (longer screws) from the Manufacturer or you local locksmith
What is the best handleset for very cold weather? My weiser set latch always seems to freeze up in the cold weather. They sent me a rubber gasket set that is supposed to fix it but I still have issues.
do you have a remote control residential electric lock keepers
i think you mentioned commercial being the most secure.....what are your views on putting a commercial lock on a residential door???
Schlage are so easy to pick though.... What about Kwikset Smartkey?
I have an Airbnb property that has two doors to get inside. The first door is a metal security door with two locks to unlock. The second wooden door behind the security door also has two locks to unlock. Is there a way to make it where a person can unlock/lock one lock to open/lock all four locks at the same time?
No. However you can have all four locks worn with the same key.
@@kelvinbatista9259 I already have that I'm trying to eliminate keys people lose them or can make copies
Thanks for your informative video. Unfortunately, however, you did not answer a question I have. My son is incapable of remembering to turn the locking mechanism when he leaves the house. I thought it would be a simple matter to install a keyed, non-pushbutton lock and doorknob set (not a deadbolt) that automatically locks when the door is closed behind you without having to remember to push or turn a button. Apparently, no such thing exists, which surprises me. I’ve already talked to a locksmith and been to Lowes, Menards and Ace Hardware, but no luck. I can’t believe what I’m looking for does not exist. Can you help me?
you need to get a commercial lock and door closer that are meant for a hotel door. And hide some keys in the yard.
Where can I purchase the b60 n residential lock? I can’t find it on Amazon or Lowes. Thank you for your assistance in this matter.
Ugh, contact the manufacturer directly?
Thank You for the Excellent talk on front door security.
Good to see it was a SC4 version. In Denmark I would not even install a 5 pin cylinder on a letterbox or a toilet door
Denmark has very good locks. Assa Abloy?
@@24hrMrLocksmith mostly Ruko. My channel is mostly about them.
Is this the same B60N model sold in big box stores?Because I’ve heard that those Schlage residential deadbolts have significantly decreased in quality(e.g. use plugs made from pot metal(As opposed to brass, utilize icepick protectors made from plastic, and have housings with hollow areas).
I just purchased a B60N from Home Depot and I will compare it to the B60N from a Locksmith Supplier. I think you are correct. Most of the major hardware stores get the CRAP version of the locks.
@@24hrMrLocksmith I have noticed that the packaging at the box stores are made in China but the ones I buy from locksmith suppliers say north America aka Mexico. I recently had to buy an extra schlage knob at home depot to finish a job and noticed it had identical latch to Defiant as did the kwikset. Really sad
@@cybersonic8472 I just purchased B60N from Home Depot and I am doing a video on the comparison between Locksmith suppler B60N and Big Box Hardware B60N
Ok, door plate is square - how to change out to the round edge to square?
There is a silver metal ring on your table and in my kit> what is it for?
There is a brass colored ring what it for?
Haven't even go to the frame plate issues yet
TX
What can you do to open a safe when the keypad has failed. This is an above floor safe. A large square safe
Depends on the safe make and model.
Call the safe manufacturer or your local locksmith.
@@24hrMrLocksmith I've done that, but they said I needed to ask a locksmith for a definitive answer
The safe is a time master. I hope this helps, so I can get an answer that helps me to open it. The safe opened the beginning of this year, but when I got back from trip I couldn't open it. I found that the battery on the positive side had corroded.
Any update on the Locksmith Supplier / Contractor B60N vs. the Home Depot B60N? I picked up a Mr. Locksmith membership to see if you had the video you teased on this topic in the member section, but I didn't see one. I'm having trouble finding the six-pin version you featured in this video and would love to buy a few through you if possible.
I can't find that video either.
One video, says the B60N with the sc-1 core is not kick proof rated, is this true.
How do you install a spring cover on a schlage kik cylinder. need help. hank you.
What’s the best door knob?
Sc1 is 5 pin sc4 is 6 pin
Mr L...great videos...
I need assistance removing and thumb lock Abloy deadbolt and or having it rekeyed.
Greg
Hey, where can I buy this lock since you said the big box versions aren't the same? And I can't find the comparison video you mention in this one, did you make that? You talked me into this lock but now I don't know which version to buy? :)
At your local Locksmith Shop
I saw someone picking this as fast as using a key on it 🤦♀️🤦♀️🤦♀️
Which is the best door knob lock?
Why is the hole in the door so large? It seems like a design flaw. The amount of surface area for the lock to attach to, is really minimal. The hole should maybe be 1/3 of the current diameter.
I live in an apt I'm being terrified by people picking my lock
I think this is a question I asked a couple months back. Thanks for making a video on it!
That said, what's the best electronic lock?
The Schlage Encode or Schlage Sense. I have a few video posted.
@@24hrMrLocksmith I have an old fingerprint door knob lock that I really, really like and I don't want to replace it but it is not a deadbolt. I reinforced the strike plate and hinges so I'm not worried about those parts, do you think the TYPE of bolt on my current lock will hold up well against a kick-in or is a deadbolt my only option? I really don't want to get rid of my current lock but I an concerned about a kick-in.
You have abloy locks there right.. right...?
Best Residential deadbolt for the money.
Or medeco?
@@jamess1787 Medeco is a great High Security lock but more expensive than the B60N.
Schlage Primus High Security Deadbolt is comparable to the Medeco.
@@24hrMrLocksmith For Primus its easier to get bump-keys for. There are only 4 different side-millings. The older Medecos manufactured prior to 2006 like the Biaxial and the M3 can be bypassed easily with a sharpened screwdriver which can turn the tailpiece... but then again ANY deadbolt with a thumbturn can be bypassed with an under door tool.
@Moishe Shekelbag all locks can be bypassed. Locks keep honest people honest. They are just a deturent.
Good information and we'll presented, thank you for sharing your knowledge 👍
Do you have a recommendation for door handle lock?
i have a b 360 and can't get screws in
What about drilling out the lock?
If the B60N is a 6 pin, what Schlage residential 5 pin dead bolt would you recommend?
It looks line the Hardware Stores sell the 5 pin SC1 and the Wholesalers supply the 6 pin SC4. I have a few more videos comparing the locks.
Few questions:
What knob would you recommend?
And is it generally advised to have a knob and deadbolts all have different keys?
I would like to have all 3 of my household doors use the same key, but that seems less secure.
Great video!
Invest the money in good deadbolts and don’t pay for key-in-knobs. Just get passage sets with no locks.
@@24hrMrLocksmith thank you for everything!
@@24hrMrLocksmith So, your saying, for entry doors, (residential in my case) skip paying for key in knob sets? Just go with the current top choice "Schlage B60N" and call it a day? I never thought about that option!? Sorta like bathrooms with two sinks.. Your paying twice for the same service.. Brilliant!! One less thing to have issues with later.. 👍👍
Who are you and how did you get in here?
I’m Mr. Locksmith … and I’m Mr. Locksmith.
What's the best lock for a residential basement door?
I can take a pipe wrench to the outside of that lock turn. It counterclockwise open that door in less than 30 seconds. Sorry that junk.
Our biggest mistake is we got the daylight so we can't use the 3 inch screws due to the glass being there, UGG
What about the best residential door knob lock?
Big fan of the Parker B9160. Or Arrow RK series.
lock picking lawyer would love to have a word with you.
Why is this product superior to the Bowley lock?
The Bowley Lock tries to be a High Security lock and has failed.
@@24hrMrLocksmith explain.
I love Mickey and Minnie Mouse
Well, somebody's spelled it "Schalge" in this video. I suspect from the correct spelling, "Schlage", and from the time the company was established that this could be a German name. So my best guess at a pronunciation would be a 'sh' sound followed by 'lager' like the beer (do you have lager beer in USA and/or Canada?) So, you could say 'Shlager' with a long 'ah' sound on the 'a' and a hard 'g'.
How I have heard it sounds like
Sch lay g I pronounce like sch leg I might be wrong on the correct pronunciation
WR-1
wiser
you should use affiliate links. great work!
My locksmith said the both kwitset and schlage are crap.
What is he recommending?
Mul T Lock
Medeco
Assa
@@24hrMrLocksmith
Everest locks super easy to bump with the right key , it opens first time consistently with barely a light bump, better get a lock with spool pins across the board! Not to mention I actually filed down a sc1 key to fit a everest and cutting the shoulder down to add the sixth pin , it not only worked on the outside doors but my apartment as well, the code was close enough to work both, I tried it on a vacant apartment next door and it didn't work!
What is a good lock than??
Locks only keep honest people out we said when I sold alarm systems 🤷🏻♀️
Why don't you make a video on the best door lock against bumping and picking
Nice thank u