Glad it was helpful. We unfortunately didn’t get to pull a lot this season but we will have some more content on pullers coming soon…. If I ever get around to editing videos.
would recommend building a triangle brace i used a sears for years and i have broken a few of the trans because of the case flex case there made of aluminum, but after i built that brace and i also weldless locked the trans as well, I haven't broke it yet and im runing giant pullers on mine at 26x12x12 and im got new pully to put one the motor to turn it up can sent a pic of the brace if you want a reference
How did you build your brace? We have broke some of the two pinion spider gear rear ends. Have changed out two the newer three pinion rear ends with the splined hubs.
Got one of those tractors all stock but is a pulling lil thing .. want to get into pulling but like you said everyone told me shaft drive. Buddy glad I found this video.. where do find tires and wheels? Thanks again..👍👍
The rims I found locally and cut the centers out then re welded them in. Tires are off Amazon 26-12-12s. Some places do sell nice aluminum rims with what ever off set you need and pulling specific tires. Check with your local clubs because some one may have a used set for cheap
I am going to be building a pulling mower out of a LX288 John Deere. I’m manual swapping it and running belt drive. My question is I am planning to run 800/ secB. What class would that be?
Every club has different rules and even the classes very. Kind of like small town circle track racing. I would talk to your club or where you plan on pulling. Sounds like a fun project
What do you think about the old case garden tractors? I just bought a case 224 (not for the intention of pulling) and it uses the hydraulic drive system. Is this system possible to pull? I don’t plan to pull real competitively just want to have some fun with it.
@@jacobjones3820 thanks! I thought that may be the case. Surely it would be fine with just 1or2 hooks a time. I’ve been busting up hard Missouri ground with it and it’s been doing fine. I just want to try it at the local track sometime just for fun.
Could I pick your brain I just got a 15 hp Sears Surbun 15 I have never pulled in my life but I wana do some stock pulling could You maybe help me out I was looking for wheels and how to hook up a dead man throtle pedal
That depends on what club you are with and the class. Most of your stock classes are made to be just that. Very basic with minimal engine modifications. They can be divided between single cylinder, twin cylinder, displacement, tractor weight, or even HP depending on the club. My recommendation would be to find a club local to you and they should have a list of class rules.
Just found your video and channel. Love it man, thanks for the in depth review on your machines!
Glad it was helpful. We unfortunately didn’t get to pull a lot this season but we will have some more content on pullers coming soon…. If I ever get around to editing videos.
Love how you explain your tips and tricks. Nice machines 👍
Would love to get started!! My 82 year old Dad and I went and saw some pulls in Southeastern Mass and fell in love!! Would love more info if possible.
This is a great video man, like to see more of this when you can
Very informative and interesting
Thank you!
Great video
would recommend building a triangle brace i used a sears for years and i have broken a few of the trans because of the case flex case there made of aluminum, but after i built that brace and i also weldless locked the trans as well, I haven't broke it yet and im runing giant pullers on mine at 26x12x12 and im got new pully to put one the motor to turn it up can sent a pic of the brace if you want a reference
How did you build your brace? We have broke some of the two pinion spider gear rear ends. Have changed out two the newer three pinion rear ends with the splined hubs.
@@keithherring2432 I welded heavy metal triangle for the back and used a 3x3 heavy metal angle and pillow block barring with steal hubs
@keithherring2432 will try to get a pic for you in morning
Cool
Got one of those tractors all stock but is a pulling lil thing .. want to get into pulling but like you said everyone told me shaft drive. Buddy glad I found this video.. where do find tires and wheels? Thanks again..👍👍
The rims I found locally and cut the centers out then re welded them in. Tires are off Amazon 26-12-12s. Some places do sell nice aluminum rims with what ever off set you need and pulling specific tires. Check with your local clubs because some one may have a used set for cheap
Thanks buddy 👍
Where you from.. need someone like you to help with getting started.. thanks great video
Thank you. Hopefully we will have some more videos coming soon but if you have specific questions I will do my best to answer them.
Awesome thank you 👍
I have the same tractor and was wondering how you did the wheelie bar? Thanks!
I am going to be building a pulling mower out of a LX288 John Deere. I’m manual swapping it and running belt drive. My question is I am planning to run 800/ secB. What class would that be?
Every club has different rules and even the classes very. Kind of like small town circle track racing. I would talk to your club or where you plan on pulling. Sounds like a fun project
Great video👍. What state are you from/pull in?
What do you think about the old case garden tractors? I just bought a case 224 (not for the intention of pulling) and it uses the hydraulic drive system. Is this system possible to pull? I don’t plan to pull real competitively just want to have some fun with it.
Yes but they tend to get hot and go to slipping like a automatic transmission when they start slipping they continue to slip
@@jacobjones3820 thanks! I thought that may be the case. Surely it would be fine with just 1or2 hooks a time. I’ve been busting up hard Missouri ground with it and it’s been doing fine. I just want to try it at the local track sometime just for fun.
Where can I get 8" three rib ties like you have?
Could I pick your brain I just got a 15 hp Sears Surbun 15 I have never pulled in my life but I wana do some stock pulling could You maybe help me out I was looking for wheels and how to hook up a dead man throtle pedal
Also I need to figure out one of those seats not sure what there called while looking for replacements
what motors can you run in each class and what modifications can you make to them
That depends on what club you are with and the class. Most of your stock classes are made to be just that. Very basic with minimal engine modifications. They can be divided between single cylinder, twin cylinder, displacement, tractor weight, or even HP depending on the club. My recommendation would be to find a club local to you and they should have a list of class rules.
Where did you find those front tires?
Take offs from another project