How To Use The Huepar Tools SD01 Cordless Screwdriver？

SD01 is one of the member of Huepar Tools family.
In this video, we will briefly introduce how to use the SD01 Cordless Screwdriver.
Firstly, let's know about the advantages of SD01!
1. 4 torque settings for precise torque adjustment for specific applications.
2. 4 types of 27 bits made of CR V-hardened steel up to 55HRC for durability and resistance to wear.
3. Magnetic hex chuck allows for quick bit changes, helps prevent screwdriver bits from falling out and can be easily removed.
4. Powerful motor with a maximum speed of 270 RPM makes it easy to twist screws in and out.
5. The screwdriver will stop immediately when releasing the switch to avoid over-tightening.
6. Built-in LED light is divided into two grades low light and strong light, which is convenient for completing the work in dimly lit places or dealing with precise and small parts.
7.Built-in 2000mAh rechargeable battery, support 5V 2A fast charging.
8. Rubber-coated handle, non-slip and comfortable.
Next, let's give a quick overview of all parts of SD01!
Charging& torque Indicator
Type C Charging Port
LED Light Button
Torque Adjustment Button
Forward&Reverse Button
LED Lights (low and strong light modes)
Hexagon Magnetic Chuck fit for 1/4''(6.35mm) Standard Bits
Rope Clasp
Now, let’s start introduce the steps to use!
Step1. Select the Appropriate Bit
Select the right bit according to the shape of the nail and install it on the magnetic chuck.
Step2. Choose the Suitable Torque
Maximum hard torque is 6N.m
Manual torque is 10N.m
Step3. Start to Screw/Unscrews
Screw Button
Unscrew Button
Step4. Check the Battery Level
Press and hold the torque button for 3 seconds to display the battery level.
Step5. Charge
Additional Usage Tips!
1.Two Modes LED Light
Press the light button and the LED light will light up
Press again to change to brighter lights
Press the third time to turn off the LED light
2.Extension Bar
When the screws are in the depths we can use an extension bar to add length to the screwdriver and easily reach the hidden screws.
3.Magnetizer
Can make the screwdrivers be magnetized or demagnetized for different usage scenarios.
How long can I use it on a full charge?
This cordless screwdriver has a built-in 2000mAh rechargeable battery, which is tested to operate more than 300 screws after being fully charged.
How can I see the battery power status?
You press and hold the torque button for 3 seconds to display the power. There are 4 indicator lights showing power, 1 bar is 25%, 2 bars is 50%, 3 bars is 75%, and 4 bars is 100%. When charging, the indicator will blink. When fully charged, the indicator will become solid.
How can I know how much the torque is?
You can press the torque button and see the number one of 1 to 4 light up. Which number lights up represents different hard torques
Why the power screwdriver can stop working?
The screwdriver's power is over or the torque cannot be reached, please check the power status and increase the torque.
Why the screwdriver cannot be charged?
If the USB cable is not plugged in properly or is dead, you can reconnect the USB and try another cable; the Ambient temperature is too high or too low may cause it not to be charged, please move the product to an environment with a suitable temp for charging.

[@liobagues]

Pequeño y resultón 😃😃