Hello have a question about the ASG Schofield you reviewed a couple of years ago, does yours have a slight side to side and up/down play at the hinge, mine does but its only noticeable when placing the gun down and the tip of the barrel touching the table, or moving it on purpose. I don't know if this is normal and couldn't find anything online.
@@kubasu There is a very slight movement at the hinge point but not enough to be concerned about. I very much doubt the real steel revolver was manufactured to great tolerances.👍
CO2 causes issues as its a liquid that turns into a gas. If it doesnt completely turn into a gas - then the vapour cloud can block the light/IR that the sensors are using. I dont recommend the NateChrony for CO2 for this exact reason - any muzzle mount will have an issue. Worse still - depending on temperatures & level of fill - it *may* work for a while, then stop working - infuriating for the user to work out.
@@brianwaites4572 mine says lose on every shot. I will also need the adapter if i want it fitting correctly on my daystate pulsar. Im contacting seller to see about sending it back or a replacement.
@@jeffmuller9020 I sent mine back on return and refunded no problem. I think the recessed infrared sensor design is bad, impossible to remove dust, etc. Good luck on your return.
Great videos! I bought the Airforceone, looks identical. I can’t get my shots to register, the display just shows LOSE after each shot. The leaflet has no troubleshooting. Any ideas?
@@brianwaites4572 Does it fit properly on the thread so it is tight? I had to modify an adapter to fit mine. I will be posting an update on calibration later using my .25 Cal. BSA Ultra sub 12 Ft/Lb.
@@reevessairgunningreviews5572 Fits snugly, the Airforceone is a bit longer and has a long thread. I’ve tried it on three rifles, it fits all perfectly but all register the same - LOSE, I don’t know what that means, no troubleshooting in the instructions.
@@reevessairgunningreviews5572 Thank you tons for your help, no I haven’t, I’ll get on and check both in the morning. I wish I could find out what LOSE ment, probably = ERROR maybe? I’ll let you know when I sort it out. Once again cheers!
@@reevessairgunningreviews5572 thanks that’s what mine is in at the minute, think I will tweak it to match my LMBR as I trust that more than my fx radar, which of yours do you trust most?
@@mk1win51 you could try some of the other Chronograph apps to see if any will recognise the Muzzle chronograph. Here’s the page to google play.play.google.com/store/search?q=airgun+chronograph+app&c=apps&hl=en_US
the back ring on the chrono is to lock back to end of barrel no need for best fittings part hope this helps. good review
Actually the back ring does not help out for locking it to my barrel and that adapter in the video is a necessity for my use. Daystate Pulsar
@@jeffmuller9020 sorry i meant if the barrel has a shroud fitted it would lock back
It’s so you can adjust the position of the read out on the barrel - sub 12 does a much better review in my opinion
Nice review Mate, pretty handy little chronograph.
Keep them coming !
@@chrisdavidson9431 cheers mate. How are you?
You know, thats a neat little piece of kit.. Like it
Seems a nice little bit of kit
Hi, was wondering if you could do a follow up on the Victoptics 2-6x32? I am looking at buying one so would be very nice
Yes I can.
Hello have a question about the ASG Schofield you reviewed a couple of years ago, does yours have a slight side to side and up/down play at the hinge, mine does but its only noticeable when placing the gun down and the tip of the barrel touching the table, or moving it on purpose. I don't know if this is normal and couldn't find anything online.
@@kubasu There is a very slight movement at the hinge point but not enough to be concerned about. I very much doubt the real steel revolver was manufactured to great tolerances.👍
@@reevessairgunningreviews5572 Thank you for the response!
CO2 causes issues as its a liquid that turns into a gas. If it doesnt completely turn into a gas - then the vapour cloud can block the light/IR that the sensors are using. I dont recommend the NateChrony for CO2 for this exact reason - any muzzle mount will have an issue.
Worse still - depending on temperatures & level of fill - it *may* work for a while, then stop working - infuriating for the user to work out.
Funny enough I bought the same model but the airforce one version. Set it up and it doesn’t read the pellets. Gutted now got to send it back.
I’m having similar problem too, did your display register LOSE after each shot?
@@brianwaites4572 mine says lose on every shot. I will also need the adapter if i want it fitting correctly on my daystate pulsar. Im contacting seller to see about sending it back or a replacement.
@@jeffmuller9020 I sent mine back on return and refunded no problem. I think the recessed infrared sensor design is bad, impossible to remove dust, etc. Good luck on your return.
Great videos! I bought the Airforceone, looks identical. I can’t get my shots to register, the display just shows LOSE after each shot. The leaflet has no troubleshooting. Any ideas?
@@brianwaites4572 Does it fit properly on the thread so it is tight? I had to modify an adapter to fit mine. I will be posting an update on calibration later using my .25 Cal. BSA Ultra sub 12 Ft/Lb.
@@reevessairgunningreviews5572 Fits snugly, the Airforceone is a bit longer and has a long thread. I’ve tried it on three rifles, it fits all perfectly but all register the same - LOSE, I don’t know what that means, no troubleshooting in the instructions.
@@brianwaites4572 Have you checked the calibration? Is the internal bore clean with the sensor holes visible?
@@reevessairgunningreviews5572 Thank you tons for your help, no I haven’t, I’ll get on and check both in the morning. I wish I could find out what LOSE ment, probably = ERROR maybe? I’ll let you know when I sort it out. Once again cheers!
@@brianwaites4572 Instructions must be pretty bad, though mine didn't come with any at all. let me know how you get on.
Mine arrived today, curious what percentage do you find best for yours (calibration wise) ?
@@Airgunfunrich currently running at 100% but may tweak it after some more testing.
@@reevessairgunningreviews5572 thanks that’s what mine is in at the minute, think I will tweak it to match my LMBR as I trust that more than my fx radar, which of yours do you trust most?
@@Airgunfunrich my FX Radar and LMBR read approximately the same, both having their uses.
@@reevessairgunningreviews5572got my brother to 3d print a spacer for mine today as the thread on my Katran is approximately 12mm
I set mine at 103.5% as it was reading low when compared to my other units.
thanks! Found it in the meanwhile (changed name already)...not actually cheap
@@quebecpatriot1874 it is compared to most.
@@reevessairgunningreviews5572 but its almost in the price range of a FX (for me at least-Canada)
@@quebecpatriot1874 Here in the UK an FX Radar is around £150, double the price of this Chronograph.
@@reevessairgunningreviews5572 Damn, the FX here is $235 and the price of this one is $215 odd that is isnt it
Hi I have a android smartphone and cannot find an app for it !! Cheers
@@mk1win51 you could try some of the other Chronograph apps to see if any will recognise the Muzzle chronograph. Here’s the page to google play.play.google.com/store/search?q=airgun+chronograph+app&c=apps&hl=en_US
@@reevessairgunningreviews5572 many Thanks for that will give it a try 😉
wheres best place to get a cheap chroney
care to link it, cant find it
@@quebecpatriot1874 www.aliexpress.com/item/1005006760346776.html?spm=a2g0n.detail.1000014.11.7cd8sK5TsK5TLg&gps-id=platformRecommendH5&scm=1007.18499.315613.0&scm_id=1007.18499.315613.0&scm-url=1007.18499.315613.0&pvid=0841a6e2-b834-4887-96d1-ea04e27d74a7&_t=gps-id:platformRecommendH5,scm-url:1007.18499.315613.0,pvid:0841a6e2-b834-4887-96d1-ea04e27d74a7,tpp_buckets:668%232846%238114%231999&pdp_npi=4%40dis%21GBP%2179.80%2175.81%21%21%2199.99%2194.99%21%40211b600217207627202766286e1533%2112000038214378163%21rec%21UK%21%21AB&_universallink=1&m_page_id=tkxhbwmfqcavkelo190a5735d2f17d27b0b51f6555
Can’t find it do you have a link please?
@@Airgunfunrich www.aliexpress.com/item/1005006531624871.html?spm=a2g0o.detail.pcDetailTopMoreOtherSeller.1.77d3XVamXVamZ0&gps-id=pcDetailTopMoreOtherSeller&scm=1007.40050.354490.0&scm_id=1007.40050.354490.0&scm-url=1007.40050.354490.0&pvid=c8bd7ae4-71c2-42e4-9d2e-7f2ff7d649bd&_t=gps-id:pcDetailTopMoreOtherSeller,scm-url:1007.40050.354490.0,pvid:c8bd7ae4-71c2-42e4-9d2e-7f2ff7d649bd,tpp_buckets:668%232846%238110%231995&isseo=y&pdp_npi=4%40dis%21GBP%2182.26%2175.33%21%21%21101.97%2193.37%21%40211b600e17203423369797746e6257%2112000037553334053%21rec%21UK%216018215220%21&utparam-url=scene%3ApcDetailTopMoreOtherSeller%7Cquery_from%3A
@@reevessairgunningreviews5572 thanks 👍
Still laughing at the brand name 😂😂😂😸🍻👍
@@nikkihayes5411 your thinking queefing, I guess?
@@Airgunfunrich me! never😸