To increase the angle in the middle of the sheet you need to apply crowning. Some machines have automatic crowning which the Cybtouch controller can adjust. The crowning is automatically calculated on the Cybtouch controller based on the Material Thickness, Material Tensile Strength and Bending Length. You can modify the crowning yourself if the calculated value is not enough or too much. You just tap the crowning icon and adjust the value until you get your perfect fold. The crowning icon can be found among all the other settings (dwell time, opening height, etc..) Other machines might not have automatic crowning. For these machines you’ll have to introduce the crowning yourself by adjusting your tooling. Please don’t hesitate to call us if you need further information. www.machineryhouse.com.au/contactus
@@Machineryhouse1930 thanks for the response, I am looking at purchasing PB-70B - Hydraulic NC Pressbrake 70T x 3200mm - Includes Laser Safety Guarding CYBELEC Touch Draw control 2-Axis, SERVO DRIVEN Ballscrew Backgauge, being the cheaper machine I would imagine that it would not include the automatic crowning adjustment? Are you able to explain How would this machine be adjusted for crowning? Or do a video if possible?
@@JSC-c We'd be happy to guide you through this process. Please feel free to contact our staff member, Sam, at 02 8838 3558 or via email at ssainsbury@machineryhouse.com.au.
@@Machineryhouse1930 ok thanks, I’m in Adelaide and see you have a new store down here, does this store have all the machinery on display like the interstate stores?
@@JSC-cWe currently have a PB-70E Hydraulic NC Pressbrake (70T x 2500mm) on display, which includes laser safety guarding and Estun NC-E21 Control 2-Axis with a leadscrew backgauge. While it isn't the exact model in question, our staff would be more than happy to demonstrate how to apply crowning on this machine and discuss your options.
Can you demonstrate how you would correct if the part is full length and it’s 90 degrees at each end but the middle is a few degrees off from 90?
To increase the angle in the middle of the sheet you need to apply crowning.
Some machines have automatic crowning which the Cybtouch controller can adjust. The crowning is automatically calculated on the Cybtouch controller based on the Material Thickness, Material Tensile Strength and Bending Length. You can modify the crowning yourself if the calculated value is not enough or too much. You just tap the crowning icon and adjust the value until you get your perfect fold. The crowning icon can be found among all the other settings (dwell time, opening height, etc..)
Other machines might not have automatic crowning. For these machines you’ll have to introduce the crowning yourself by adjusting your tooling.
Please don’t hesitate to call us if you need further information.
www.machineryhouse.com.au/contactus
@@Machineryhouse1930 thanks for the response, I am looking at purchasing PB-70B - Hydraulic NC Pressbrake
70T x 3200mm - Includes Laser Safety Guarding
CYBELEC Touch Draw control 2-Axis, SERVO DRIVEN Ballscrew Backgauge, being the cheaper machine I would imagine that it would not include the automatic crowning adjustment? Are you able to explain How would this machine be adjusted for crowning? Or do a video if possible?
@@JSC-c We'd be happy to guide you through this process. Please feel free to contact our staff member, Sam, at 02 8838 3558 or via email at ssainsbury@machineryhouse.com.au.
@@Machineryhouse1930 ok thanks, I’m in Adelaide and see you have a new store down here, does this store have all the machinery on display like the interstate stores?
@@JSC-cWe currently have a PB-70E Hydraulic NC Pressbrake (70T x 2500mm) on display, which includes laser safety guarding and Estun NC-E21 Control 2-Axis with a leadscrew backgauge. While it isn't the exact model in question, our staff would be more than happy to demonstrate how to apply crowning on this machine and discuss your options.