I think most players in Australia would want to buy these, (including me) it's great to see people pushing the limits - keep up the great work - I just subscribed
Riser are still chunky but they do work a little better then some other brands, really comes down to trying them out with different gel balls to se what setup works.
@@galapagosj3021 Yeah - since I found the NT1 by Rizer (integrated outer barrel with the hopup) I havent looked back. In saying that, I recall you not being real impressed with the SLR CQB for its accuracy - do you know of the WI gearbox has been ported correctly for such a short barrel? Or have they been lazy and just chucked in a standard box? Also, I did hear rumours that the SLR flash hider was a hopup as well? Either way - I pick mine up this afternoon, so can probably answer those questions myself soon :)
I fkn LOVE your videos, mate. Great stuff, keep 'em coming! I won't ask about the hopups given that I recognise about 4 of the names on the comments and once we can get them in Western Australia, I'm sure I'll get my hands on one. Great stuff though, very informative.
im very happy watching this clip, cause my hop-up kinda similar to this, u know the rubber tube on writing pen, the tube use to anti-slip, extra grip , i slide it inside the barrel
Thank you, I really appreciate your videos, you helps the community so much ! I want to ask U that where is the link to buy the 4 tubes of hop-up like that. I cannot find it on taobao :> Could you provide me a link please
Ok this is going to be an official reply regarding where to get it. I have contacted the guy who makes these hop-ups and he had explained that although he does export his products, due to language limitation, he only exports to Southeast Asia and such. However, he does have a friend who lives in Sydney who would be able to handle orders and if the order quantity is big enough, he will start selling to Australia. Other countries will depend on what resources he has in that country. So if you have friends who are interested, spread the word and I'll revert your requests to him.
Will do my best to help you out on my end, meanwhile try contacting Easty66, another comment from Oz who said he managed to get his hands on sweethearts.
Actually I started with gameplay shooting and stuff but it was more of a long term testing, using different camera setups and workflow. So far I haven't been able to get a proper setup down because I play mostly night games as well, so lighting is a huge issue. But it's the night games that are the most fun. There's a little bit of gameplay in the What Are Gel Blasters? video, it's closer to the end of the video. ruclips.net/video/bc7xMDLxICk/видео.html
Jeffrey Watson, was able to find these selling in QLD, I’ve ordered stuff from them before and everything has turned up all right. www.australiablastertactical.com/product-page/sweet-heart-inner-barrel-hop-up-sets hope this helps
If you have your own 3D printer you can either design your own like I have or get a design from Thingiverse. Not only can you adjust the pressure but you can adjust the layer heights of the print to make the surface smooth or course for greater grip with less pressure. I find if printed in pla or abs they are quite strong and only cost much to print
Ghost Blast Mod...when you get a moment, this bloke is mucking around with directly firing into the hop up then barrel, he is still tweaking, but have a gander.
Ok this is going to be an official reply regarding where to get it. I have contacted the guy who makes these hop-ups and he had explained that although he does export his products, due to language limitation, he only exports to Southeast Asia and such. However, he does have a friend who lives in Sydney who would be able to handle orders and if the order quantity is big enough, he will start selling to Australia. Other countries will depend on what resources he has in that country. So if you have friends who are interested, spread the word and I'll revert your requests to him.
@@galapagosj3021 A lot of us but from monkey mods, maybe supplying them is an option? Anyway, thanks for your efforts! You've given us great insight. Ohh.. What's your thoughts on stainless steel barrels?
Hey David, I'm still talking to the maker and it seems there are quite a bit of interest for the hop-up set I mentioned, he might be interested to sell some. Regarding stainless steel barrel another user actually asked me the same question, so to keep the answer consistent, I'm going to copy and paste my answer to him for your reference. But at the end of the day, any experimentation is great. Answer: "I'd say any material that is heavy enough to reduce vibration would be good. I haven't tried stainless steel before but I'd imagine it to be a lot more difficult to modify compared to copper (other than cutting to length, you still need to polish and bevel the exit ends of the tube). Stainless steel is much too hard and requires a lot more machinery that my work shop does not have. Copper is still soft enough that many of my hand tools are able to deal with. The consideration would then be, is it really necessary to have an inner barrel at such high tensile strength? Inner barrels don't experience any wear and tear anyway, so as long as it meets the need of reducing vibration and it doesn't get affected by water (rusting), easy to modify, then its already good enough. That would be my consideration when selecting a new material for inner barrel tubing. It's always good to experiment though, let me know what other materials you discover in the future!"
@@galapagosj3021 I really appreciate you helping the community. It seems were a bit behind in everything as usual haha I've yet to see copper barrels available, but I'll give them a go when they are. Thanks again! PS. We love teardowns, and how to vids if you're up for it. 😉
Great video, quite informative. From all 4 sweetheart which one is you recommended for standard gearbox which fps less than 260fps? I would love to buy all 4 but seem like useless if i am only use 1 number hopup.
For myself, I go by this principle, the lower the FPS, the higher I go with hop-up. 260 fps is relatively low, so level 2-3 for the sweetheart should be good.
Thanks for the great content. You mention that you hold the new hop up in place using electrical tape. Is this the manufacturers recommendation? Have you noticed the hop up becoming loose or sliding off after some time?
Nah, its just my own solution. It really depends on what inner barrel you are using, some might be so thin that you might even need to thicken the outer diameter of the inner barrel so that the hop-up can fit snuggly. But at the end of the day, gel blaster isn't as prevalent as airsoft, so a lot of the solutions and methods are all trial and error and there aren't really much official documentation out there. I've been playing with gel blaster for close to a decade now, so I might have more strange solutions than others, lol.
@@galapagosj3021 For sure mate. Check out the Low Guido Chop Shop channel and find the video "new heavier LDT milkies gel ball testing (part 2)" for some footage at around 3.04. There are some others floating around but generally use right angle spaced progressively apart with containers underneath. Usual folks take a mag and feed the machine via a mag tube. Low Guido did something extra spec. But cannot find a vid on it.
I'm still talking to the Sweetheart hop up guy but he still doesn't feel like there's a big enough market for him to start something there lol Still working on it. However, I just replied to another Aussie who actually managed to buy one, look for Easty66 from the MP5 video comments section.
Sorry for my bad english, but may i ask you one question: do you count the length of sweetheart hopup to the length of inner barrel when you calculate the suitable length for the cylinder volume?
Thanks for the insight. Can you post where you get the sweetheat hopups? Also can we have a close-upof gelball stopper as that's a term I'mnot familiar with. BTW in Oz we call the freeway a t-piece
Ok this is going to be an official reply regarding where to get it. I have contacted the guy who makes these hop-ups and he had explained that although he does export his products, due to language limitation, he only exports to Southeast Asia and such. However, he does have a friend who lives in Sydney who would be able to handle orders and if the order quantity is big enough, he will start selling to Australia. Other countries will depend on what resources he has in that country. So if you have friends who are interested, spread the word and I'll revert your requests to him.
Check out my latest Gel Blaster News video, the 2020/01/26 episode, it has the link to the hop-up. It will fit your HK416D, it uses an aluminium barrel that is quite a standard size. It might be a bit loose, so just add some thread sealing tape to the inner barrel.
matt gel ball O_O??? what is that gel ball you mention? i would like to get some to try it out but couldn't find anything also, i could not find any copper barrels locally, but there are stores selling stainless ones, in terms of stiffness that would be better i assum?
We call them matte gel balls here, you guys might call it differently, but it's produced by AKA, there should be a store selling it. It really depends on where you are from. Copper barrels are not a common item, you may want to find a substitute. The principle is to have something heavier than aluminium.
Hey Ka Doink, yes I am waiting to see how much interest can be generated before I revert back to the hop up guy, hopefully I can get him to start selling it in Oz.
Actually that's a very good point, because it goes back to that question I mentioned in the accuracy video, what is your application for the gel blaster? Your playstyle is much more important when considering what upgrades to use. Personally, I still apply hop-ups even if I play CQB arenas, especially our own. We have ranges of up to 20m that require quite accurate shots. Without the hop-ups, your first shot might not hit the target and once you pulled the trigger, you would have exposed your position. So in this case, hop-up is still quite important if you like sneaking around and shooting from afar. If you just rush and spray, then hop-up isn't that necessary.
Has anyone done any experiments with rifling the barrel (for better spin), or re-visited using airsoft style hop-ups (they might work better now with the harder gels on the market). - Just putting it out there
Spherical ammunition require the Magnus effect to help it gain the up spin to ensure the trajectory stays level (or slightly up), rifling is more for long cylindrical ammunition and will not help gel balls. Airsoft guys have tried that stuff and the general consensus is that, its more a hinderance than a help. It seems that rifling has a detrimental effect on the trajectory for muzzle velocity beyond 90m/s (approx. 297 fps). For gel balls, although its possible to hit that muzzle velocity no problem, the gel balls deform as well and are pretty soft. I'd imagine it'll get shredded up as it travels along a rifled barrel...
@Galápagos J - Ok, thanks mate ,that was a very in depth response - much appreciated. Still could be worth looking into the second thing I said though.
Ok this is going to be an official reply regarding where to get it. I have contacted the guy who makes these hop-ups and he had explained that although he does export his products, due to language limitation, he only exports to Southeast Asia and such. However, he does have a friend who lives in Sydney who would be able to handle orders and if the order quantity is big enough, he will start selling to Australia. Other countries will depend on what resources he has in that country. So if you have friends who are interested, spread the word and I'll revert your requests to him.
You can check out my gel balls review video: ruclips.net/video/2Z9CUafnDZE/видео.html Its a two part video, recommend you watch it all. Anyway, the matte gel ball looks like milkies but more translucent and much much harder.
I saw another commenter Easty66 said he managed to get them, you can try asking him for directions. I’m talking to the sweetheart guy to see if he can ship a bunch to Oz.
Hi sir if I may be able to get a friend request from you it will be awesome to talk to you about my gell blaster with you if I ever have any problems that may come up, cause you no your stuff and I lean from you. I have suburbs to your video on u tube. Hope to speak to you soon thank you. Your friend from Sydney Australia.
No problems at all, please feel free to email me at anytime, I haven't setup Facebook or Instagram yet so, email might be the quickest way to get to me.
Ok this is going to be an official reply regarding where to get it. I have contacted the guy who makes these hop-ups and he had explained that although he does export his products, due to language limitation, he only exports to Southeast Asia and such. However, he does have a friend who lives in Sydney who would be able to handle orders and if the order quantity is big enough, he will start selling to Australia. Other countries will depend on what resources he has in that country. So if you have friends who are interested, spread the word and I'll revert your requests to him.
The ones I use and promoted work pretty well for me, what problems did you have with them? With the different levels of hop-up, you need to pair it up with the right muzzle velocity / spring power. Also, a lot of other factors can affect trajectory other than the hop-up. The hop-up should only be applied as a final touch when everything else is solid, including properly prepared gel balls. The ones that have the steel rods are great, but they are much too big for me since it reduces my applications, but that's the only problem I have with it. Performance as a hop-up, its great.
@@galapagosj3021 those with stainless steel rod type are more effect and perfect for almost any type blaster.... 4 in 1 type not only me said it actually bad...i pass few set to local(malaysia) player all feel same way....
@@galapagosj3021 i give away those hopup already...hahahaha and my blaster now in perfect shape...if u saw video on my channel.....stay perfect around 280 fps in 18cm barrel
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
I think most players in Australia would want to buy these, (including me) it's great to see people pushing the limits - keep up the great work - I just subscribed
Definitely something that would be amazing to have instead out the mediocre 3D printed hopups we have here in Australia now. 100% would be interested.
Hay mate, check out the rizer series of hopups
Riser are still chunky but they do work a little better then some other brands, really comes down to trying them out with different gel balls to se what setup works.
check this out..
ruclips.net/video/kyPz7mLLvug/видео.html
your welcome www.aliexpress.com/item/4000722540113.html?spm=a2g0o.cart.0.0.48913c00nTt7Vw&mp=1
Awesome channel, subscribed. Please keep us posted on when/ where we might get these hopups in Aus should that become a possibility in future :)
Also have a look at the Rizer NT1 outer barrel with an integrated hopup. Have been using it on my SLR and my HK416 and both fire like lasers now.
Rizer makes great hop ups, but I use sweetheart for the lower profile so I can be more flexible with tracers, flash hiders and whatnot.
@@galapagosj3021 Yeah - since I found the NT1 by Rizer (integrated outer barrel with the hopup) I havent looked back. In saying that, I recall you not being real impressed with the SLR CQB for its accuracy - do you know of the WI gearbox has been ported correctly for such a short barrel? Or have they been lazy and just chucked in a standard box? Also, I did hear rumours that the SLR flash hider was a hopup as well?
Either way - I pick mine up this afternoon, so can probably answer those questions myself soon :)
I fkn LOVE your videos, mate. Great stuff, keep 'em coming!
I won't ask about the hopups given that I recognise about 4 of the names on the comments and once we can get them in Western Australia, I'm sure I'll get my hands on one.
Great stuff though, very informative.
im very happy watching this clip, cause my hop-up kinda similar to this, u know the rubber tube on writing pen, the tube use to anti-slip, extra grip , i slide it inside the barrel
Thank you, I really appreciate your videos, you helps the community so much !
I want to ask U that where is the link to buy the 4 tubes of hop-up like that. I cannot find it on taobao :> Could you provide me a link please
did u have review for this sweethart hopup
Awesome. Can you please add link on the sweethearts hopup?
Ok this is going to be an official reply regarding where to get it. I have contacted the guy who makes these hop-ups and he had explained that although he does export his products, due to language limitation, he only exports to Southeast Asia and such. However, he does have a friend who lives in Sydney who would be able to handle orders and if the order quantity is big enough, he will start selling to Australia. Other countries will depend on what resources he has in that country. So if you have friends who are interested, spread the word and I'll revert your requests to him.
Would a tight bore brass barrle and a vented barrle stop or lessen counter an top spin ?
You could try a ..CROWN POINT barrle brake..the Automage semi auto paint guns
Another aussie here rather interested in the sweetheart hop up
Will do my best to help you out on my end, meanwhile try contacting Easty66, another comment from Oz who said he managed to get his hands on sweethearts.
hope u test it ^^ , thanks
Just subscribed, would love to see some of your gameplay (although I'm getting the sense that isn't quite your style from what you usually upload)
Actually I started with gameplay shooting and stuff but it was more of a long term testing, using different camera setups and workflow. So far I haven't been able to get a proper setup down because I play mostly night games as well, so lighting is a huge issue. But it's the night games that are the most fun.
There's a little bit of gameplay in the What Are Gel Blasters? video, it's closer to the end of the video. ruclips.net/video/bc7xMDLxICk/видео.html
Great vid GJ👍
Hey Jason I’m in Australia and am trying to get the sweetheart hop up sets but can only find the plastic ones please help if you can.
Jeffrey Watson, was able to find these selling in QLD, I’ve ordered stuff from them before and everything has turned up all right. www.australiablastertactical.com/product-page/sweet-heart-inner-barrel-hop-up-sets hope this helps
If you have your own 3D printer you can either design your own like I have or get a design from Thingiverse. Not only can you adjust the pressure but you can adjust the layer heights of the print to make the surface smooth or course for greater grip with less pressure. I find if printed in pla or abs they are quite strong and only cost much to print
Ghost Blast Mod...when you get a moment, this bloke is mucking around with directly firing into the hop up then barrel, he is still tweaking, but have a gander.
I am interested to purchase the sweetheart hopup, pls help me to purchase these hop up thnks
yeh were do i get those low profile ones?
@@lettucey8401 @Frank Mosses www.chgbbs.com/index.php?route=product/product&product_id=577
its all english and is reasonable priced
We all want sweetheart hopups to try in Australia now
The more the merrier, it'll make it easier for the guys to ship it over, since it spreads out the logistics costs.
@@galapagosj3021 Can you send me contact details for the maker, arron8138@gmail.com Cheers!
I'm trying to get him to allocate an English speaker to be able to sell it to you guys, will keep you posted!
Hi Jason, I'd like to try your recommendations. Would you have a link to the copper barrels and sweetheart hopups?
Ok this is going to be an official reply regarding where to get it. I have contacted the guy who makes these hop-ups and he had explained that although he does export his products, due to language limitation, he only exports to Southeast Asia and such. However, he does have a friend who lives in Sydney who would be able to handle orders and if the order quantity is big enough, he will start selling to Australia. Other countries will depend on what resources he has in that country. So if you have friends who are interested, spread the word and I'll revert your requests to him.
@@galapagosj3021 A lot of us but from monkey mods, maybe supplying them is an option? Anyway, thanks for your efforts! You've given us great insight.
Ohh.. What's your thoughts on stainless steel barrels?
Hey David, I'm still talking to the maker and it seems there are quite a bit of interest for the hop-up set I mentioned, he might be interested to sell some. Regarding stainless steel barrel another user actually asked me the same question, so to keep the answer consistent, I'm going to copy and paste my answer to him for your reference. But at the end of the day, any experimentation is great.
Answer: "I'd say any material that is heavy enough to reduce vibration would be good. I haven't tried stainless steel before but I'd imagine it to be a lot more difficult to modify compared to copper (other than cutting to length, you still need to polish and bevel the exit ends of the tube).
Stainless steel is much too hard and requires a lot more machinery that my work shop does not have. Copper is still soft enough that many of my hand tools are able to deal with.
The consideration would then be, is it really necessary to have an inner barrel at such high tensile strength? Inner barrels don't experience any wear and tear anyway, so as long as it meets the need of reducing vibration and it doesn't get affected by water (rusting), easy to modify, then its already good enough.
That would be my consideration when selecting a new material for inner barrel tubing. It's always good to experiment though, let me know what other materials you discover in the future!"
@@galapagosj3021 I really appreciate you helping the community. It seems were a bit behind in everything as usual haha
I've yet to see copper barrels available, but I'll give them a go when they are.
Thanks again!
PS. We love teardowns, and how to vids if you're up for it. 😉
I'm ready to buy them, send us a link!
for the vector are you able to put the regular (from the box) silencer on after the hop up is attached to your inner barrel?
I haven't tried but I believe so, the outer diameter of the sweetheart hop up is only 9.9mm
Can you please do a performance video on your Vector? That looks awesome with the copper barrel and internal hopup.
I'm planning a video like that, still trying to figure out some details.
Great video, quite informative. From all 4 sweetheart which one is you recommended for standard gearbox which fps less than 260fps? I would love to buy all 4 but seem like useless if i am only use 1 number hopup.
For myself, I go by this principle, the lower the FPS, the higher I go with hop-up. 260 fps is relatively low, so level 2-3 for the sweetheart should be good.
@@galapagosj3021 thanks for the reply. Its really helpful mate. Cheers
Thanks for the great content. You mention that you hold the new hop up in place using electrical tape. Is this the manufacturers recommendation? Have you noticed the hop up becoming loose or sliding off after some time?
Nah, its just my own solution. It really depends on what inner barrel you are using, some might be so thin that you might even need to thicken the outer diameter of the inner barrel so that the hop-up can fit snuggly. But at the end of the day, gel blaster isn't as prevalent as airsoft, so a lot of the solutions and methods are all trial and error and there aren't really much official documentation out there. I've been playing with gel blaster for close to a decade now, so I might have more strange solutions than others, lol.
May i ask where is the saler of the hop up based? Are they selling on taobao or alibaba/aliexpress? Thanks
Taobao
@@galapagosj3021 can you give me the link to the shop? Thanks
I'm from south east Asia, and i like to buy some of that hop up, what is the name or do you have a link on taobao i can go to? Thanks a lot
Regarding gel ball size variations a few aussies here have rigged up size sorting machines!
Dude, please share how to make, I'd love to have one of those. But do these machines really sort even down to 0.1mm of difference?
@@galapagosj3021 For sure mate. Check out the Low Guido Chop Shop channel and find the video "new heavier LDT milkies gel ball testing (part 2)" for some footage at around 3.04. There are some others floating around but generally use right angle spaced progressively apart with containers underneath. Usual folks take a mag and feed the machine via a mag tube. Low Guido did something extra spec. But cannot find a vid on it.
I purchased a set of sweetheart hopups and i wasn't a fan, just wasn't getting enough backspin compared to a rizers v2 that can get almost 40m
would like to get these in Australia if they do work as well as you say
I'm still talking to the Sweetheart hop up guy but he still doesn't feel like there's a big enough market for him to start something there lol Still working on it. However, I just replied to another Aussie who actually managed to buy one, look for Easty66 from the MP5 video comments section.
Search... Metal Hopup 10 mm Direct installation Convex tube built-in hopup ..on AliExpress.. if you looking and willing to wait
Sorry for my bad english, but may i ask you one question: do you count the length of sweetheart hopup to the length of inner barrel when you calculate the suitable length for the cylinder volume?
Yes I do because the hop ups I use are quite long
May you let me know the length of the sweetheart hopup?
...on2it Brotherman cheers again...
Thanks for the insight. Can you post where you get the sweetheat hopups? Also can we have a close-upof gelball stopper as that's a term I'mnot familiar with. BTW in Oz we call the freeway a t-piece
Ok this is going to be an official reply regarding where to get it. I have contacted the guy who makes these hop-ups and he had explained that although he does export his products, due to language limitation, he only exports to Southeast Asia and such. However, he does have a friend who lives in Sydney who would be able to handle orders and if the order quantity is big enough, he will start selling to Australia. Other countries will depend on what resources he has in that country. So if you have friends who are interested, spread the word and I'll revert your requests to him.
Also interested in a pack of 4
What are these matt gel balls your talking about? What company make them?
AKA makes them.
Links to sweet heart hop up?
And will it even fit my ldt hk416d?
Check out my latest Gel Blaster News video, the 2020/01/26 episode, it has the link to the hop-up. It will fit your HK416D, it uses an aluminium barrel that is quite a standard size. It might be a bit loose, so just add some thread sealing tape to the inner barrel.
Im not going to ask for as link to sweetheart hopups🤣
matt gel ball O_O??? what is that gel ball you mention?
i would like to get some to try it out but couldn't find anything
also, i could not find any copper barrels locally, but there are stores selling stainless ones, in terms of stiffness that would be better i assum?
We call them matte gel balls here, you guys might call it differently, but it's produced by AKA, there should be a store selling it. It really depends on where you are from.
Copper barrels are not a common item, you may want to find a substitute. The principle is to have something heavier than aluminium.
Seems to be alot of interest in the barrels and hopups from Australia.
Perhaps the designer could start an Ebay shop?
Hey Ka Doink, yes I am waiting to see how much interest can be generated before I revert back to the hop up guy, hopefully I can get him to start selling it in Oz.
Can confirm. Any hop up with a whiff of performance sell like hot cakes here in Oz.
Whats the best hop up for my ldt hk416d?
Do you think CQB games would even require hopups? I’ve note been using them on small map plays. The spread kind of helps sometimes
Actually that's a very good point, because it goes back to that question I mentioned in the accuracy video, what is your application for the gel blaster? Your playstyle is much more important when considering what upgrades to use. Personally, I still apply hop-ups even if I play CQB arenas, especially our own. We have ranges of up to 20m that require quite accurate shots. Without the hop-ups, your first shot might not hit the target and once you pulled the trigger, you would have exposed your position. So in this case, hop-up is still quite important if you like sneaking around and shooting from afar. If you just rush and spray, then hop-up isn't that necessary.
Has anyone done any experiments with rifling the barrel (for better spin), or re-visited using airsoft style hop-ups (they might work better now with the harder gels on the market). - Just putting it out there
Spherical ammunition require the Magnus effect to help it gain the up spin to ensure the trajectory stays level (or slightly up), rifling is more for long cylindrical ammunition and will not help gel balls. Airsoft guys have tried that stuff and the general consensus is that, its more a hinderance than a help. It seems that rifling has a detrimental effect on the trajectory for muzzle velocity beyond 90m/s (approx. 297 fps). For gel balls, although its possible to hit that muzzle velocity no problem, the gel balls deform as well and are pretty soft. I'd imagine it'll get shredded up as it travels along a rifled barrel...
@Galápagos J - Ok, thanks mate ,that was a very in depth response - much appreciated. Still could be worth looking into the second thing I said though.
Where can I get the hopup?
Ok this is going to be an official reply regarding where to get it. I have contacted the guy who makes these hop-ups and he had explained that although he does export his products, due to language limitation, he only exports to Southeast Asia and such. However, he does have a friend who lives in Sydney who would be able to handle orders and if the order quantity is big enough, he will start selling to Australia. Other countries will depend on what resources he has in that country. So if you have friends who are interested, spread the word and I'll revert your requests to him.
Ok just email me gamejesta@gmail.com 😁
GalapagosJ can you share the link for the hop up that you use
What is a mat gel ball
You can check out my gel balls review video: ruclips.net/video/2Z9CUafnDZE/видео.html
Its a two part video, recommend you watch it all. Anyway, the matte gel ball looks like milkies but more translucent and much much harder.
so were can we get the sweethart hopups from?
I saw another commenter Easty66 said he managed to get them, you can try asking him for directions. I’m talking to the sweetheart guy to see if he can ship a bunch to Oz.
@@galapagosj3021 ok cool thanks for that. nice chatting to you btw
Hi sir if I may be able to get a friend request from you it will be awesome to talk to you about my gell blaster with you if I ever have any problems that may come up, cause you no your stuff and I lean from you. I have suburbs to your
video on u tube. Hope to speak to you soon thank you. Your friend from Sydney Australia.
No problems at all, please feel free to email me at anytime, I haven't setup Facebook or Instagram yet so, email might be the quickest way to get to me.
are you in qld?
Nah mate, I live in the northern hemisphere, very up north, very cold.
Malaysia?
I just got back from Malaysia, beautiful country, loved it, but no, I'm not from Malaysia.
hi Jason where do you buy sweetheart hopups from thankyou
Ok this is going to be an official reply regarding where to get it. I have contacted the guy who makes these hop-ups and he had explained that although he does export his products, due to language limitation, he only exports to Southeast Asia and such. However, he does have a friend who lives in Sydney who would be able to handle orders and if the order quantity is big enough, he will start selling to Australia. Other countries will depend on what resources he has in that country. So if you have friends who are interested, spread the word and I'll revert your requests to him.
4 in 1 actually bad(i test it 4month ago)
the perfect 1 are those stainless steel rod (14mm)
The ones I use and promoted work pretty well for me, what problems did you have with them? With the different levels of hop-up, you need to pair it up with the right muzzle velocity / spring power. Also, a lot of other factors can affect trajectory other than the hop-up. The hop-up should only be applied as a final touch when everything else is solid, including properly prepared gel balls.
The ones that have the steel rods are great, but they are much too big for me since it reduces my applications, but that's the only problem I have with it. Performance as a hop-up, its great.
@@galapagosj3021 those with stainless steel rod type are more effect and perfect for almost any type blaster....
4 in 1 type not only me said it actually bad...i pass few set to local(malaysia) player all feel same way....
Interesting, what happens when you guys use it? No hop up effect or too much? Can you tell me what the problem is like? I can troubleshoot for you.
@@galapagosj3021 i give away those hopup already...hahahaha
and my blaster now in perfect shape...if u saw video on my channel.....stay perfect around 280 fps in 18cm barrel
Ninja hop up is one of the best, Chainsaw brand is a total trash