AS 2001 ALLPRO-SC - Profiling two blades in one go
HTML-код
- Опубликовано: 7 сен 2024
- Instruction on how to profile two blades in one go on the AS 2001 ALLPRO-SC.
The AS 2001 ALLPRO-SC is Prosharp's most advanced sharpener. With the the ability to profile two blades at the same time.
The new self-centring blade clamp makes it even easier to sharpen both hockey and figure skates.
![Run Away - Tzuyu(TWICE) ツウィ 쯔위 [Music Bank] | KBS WORLD TV 240906](http://i.ytimg.com/vi/KnHNNyAYiu0/mqdefault.jpg)
272 mm skate blade size 0:35. Marker marks blade at 272 setting 0:59 . Profiled region depends on skate runner size.
Добрый день! Для чего делается калибровка?
You should include details about changing the wheels from the standard to the wide profile wheel and how the dial needs to be adjusted.
We've chosen not to include the steps for changing the wheel in this video. We refer you to this video when it comes to changing/adjusting wheel width: ruclips.net/video/H0Tzn_N43Fs/видео.html
We will add the reference to the video subtitles. Thank you for pointing that out :)
@@ProsharpWorld Thanks for sharing that 👍
@@NicholasG27 Thank you for noticing it :)
Is there a video at all or could you guys make one on touching up a profile that's previously been done on a set of steels, because using the same measure points may just set the lean further forward, no?
All profiles that has a moved pivot point (even singles) needs to go through the process that you are referring to. For the double it is always crucial to do this even if the pivot point is not moved.
We will be making a video describing this as soon as possible.
Привет!! Количество проходов и давление камня на лезвии, немного ли для того чтоб сделать плоскость??
Hi there, unfortunately we have difficulties understanding your language so please could you translate it in english? I'm sorry about the inconvenience but looking forward helping you out.
@@ProsharpWorld It was in Russian))) The number of passes and the pressure of the stone on the blade, is it a little in order to make a plane?? Thanks)
@@cryerdimon Thank you! Not sure if Google translate got your point but I assume that you are wondering how many passes it takes to profile steels and how much pressure you should use? When you program the machine for profiling, you can first set it up so that all 5 lights are lit. This means that machine will repeat 25 cycles. Profiling is done when guide roll touches the template for the entire length of the steel. Pressure you can determine based on what type of steel you are working with. More pressure (counter weight in left) will make profiling quicker, but but also more noise. I hope this info helps, but again let us know if it didn't answer your question.
@@ProsharpWorld Thank you for the information! Now everything has become much clearer, we are waiting for your new video and new profiles))
@@cryerdimon Thats great! Feel free contacting with any questions that you may have down the road.
Fake News! Where is the different 254, 263, 272, 280, 288mm runners? ? ?