Sigma Series 4 Tile Cutter
HTML-код
- Опубликовано: 13 сен 2024
- The new Sigma Series 4 supersedes the existing Series 3 Max tile cutter with new features and benefits including;
👉Ergonomic handle specifically for push scoring
👉Automatic steel compensator (ratchet system)
👉 Any thickness of tile can be scored without adjustment
👉 New handle with 3 bearings for a smoother action
👉Lighter, single piece aluminium base for strength
👉Spring loaded support arms for larger format tiles
👉Metric guide bar with size /angle measurements
👉Locator pin for guide bar as a replaceable part of the body
👉Guide bar that can pivot up to 45 degrees in both directions
👉Adjustable stop for quick positioning of the guide bar
👉Metric scale with side and diagonal measure
👉Long and wider lateral stop for thinner cuts
👉New wider breaking foot with anti-mark base
👉Spare scoring wheel storage
👉Base pre-designed to allow fitting of a laser (launches 2023)
is the measure bars different for left or right handers? i have a 3d 36 in pull sigma and the measure bar is longer on the right which i dont like. i much prefer the longer side on the left, like the one in this video, so is this something that you have control of when ordering?
Thanks so much for that explanation on the pull and push. I need to see it in action to know which one I will like. I'm on the fence there at this time.
Is there a video explaining this somewhere?
Pull is easier to line up on a mark and a bit quicker to use, so its better for glazed and typical wall tiles, but it has lesser scoring and breaking power. Push is better for 10+mm tiles, especially if they have rough surface that is difficult to score. I have been working with Sigma pull (64cm) for years and can do most of the jobs with it, but for large format tiles I would prefer a stronger handle.
@@tomislav5689 I appreciate the comment and the explanations.
It seems the 49 in series 4 comes in push only, can i purchase a series 4 pull handle and put it on?
Did you say laser 😮
I'm a tile guy, could I get a free one to try out? I like the handle with the drop down pads
Lol
@@TheRealDill93 he tried lol
Quanto custa
Is the laser switch available yet???
Thanks for comment - Sigma have told us it’ll be out next year but no date has been given.
Where can I order this beautiful machine??
Thanks
Hi Dave its available from tomorrow if looking for despatch or early next week for collection - finally it has arrived! Here's the link to order: www.nctilesandbathrooms.com/sigma-series-4/c/2126
@@Nichollsandclarke what is the difference between up and nex handles?
Rubi tz all day
When can I buy one
Hi Brian - they finally arrive this week due in Thursday/Friday. You can pre order it online with 24 hour despatched: www.nctilesandbathrooms.com/tile-cutting-drilling/c/1756?dynNav=Brand::Sigma;
@@nichollsclarke5381 what is the difference in the next handle and the UP handle
can you add the series 4 handle to a series 3 body
Hi - Thanks for the query. The new series 4 handle can only be used with the series 4 cutter. The series 3 height adjustment was made by adjusting the guide rail. With the series 4 the guide bar is a fixed height and the handle has a ratchet system to adjust for height. Guide rail and handle are different sizes. Hope this helps!
У меня точно такой же только 95 и я могу сказать что покрытие шины слабое . от верхнего ролика на ручке со временем получается продольная раковина от того что отлущивается хром . и это плохо при медленном проведении ручки на шине она застряет .
Может ее шлифануть?
Can you turn the handle around
No, you need a different handle.if you want to pull you need the pull handle.
@@piesareround i know people that use them backwards the whole cutter
İphone almak ne demekse seramikciler için sigma almak o demek
Didn't like it at all...