lenovo ideapad 300 Tear down and disassembly
HTML-код
- Опубликовано: 23 авг 2024
- In this video i will show you step by step on how to Disassemble and Reassemble your lenovo ideapad 300 Laptop.
📢 Checkout my Amazon picks: www.amazon.com...
------------------------------------------------------------------------
👉 Do ti yourself service:
✖ TOOLS USED:
● Kit to disassemble: amzn.to/2CATV8e
● Torx Security T8: amzn.to/2yxbFyy
● PH00 Phillips: amzn.to/2EHEvl3
● Tweezer Set: amzn.to/2yvNjVV
● Electric Screwdriver: amzn.to/2D0iGvq
● Thermal Paste: amzn.to/2O3g3u4
● Canned Air: amzn.to/2yzuNf9
● Air Blower: amzn.to/2O4f78F
● Alcohol isopropilico: amzn.to/2qGMIws
● Shop Towels Pack: amzn.to/2M44Ybj
✖ Equipment Used:
● Hakko Hot Air Station: amzn.to/2O1k0PX
● Nozzle for hot air station: amzn.to/2D21XYM
● Hakko Soldering Station: amzn.to/2PRrtCF
● Hakko Air Filter: amzn.to/2O2zJyf
● Microscope: amzn.to/2CDqyCb
● Kester Solder: amzn.to/2D2Bl9R
------------------------------------------------------------------------
✖ uFixTek is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com
Thank you. I managed to clean mine out without damaging any critical connections or components. Looking forward to faster operation and no crashing due to overheating 😊
It's my pleasure my friend.
Should you have any further questions or requests in the future, please don't hesitate to ask me.
cheers🍻
This was such a clear video and saved me a great deal of heartache! Was able to fix my problem just by reconnecting some things and it saved me loads of money 😊
Glad it helped! Thank you for the feedback and your support to the channel by a SUB :P
if you ever got any question or request feel free to ask me my friend :)
Very detailed, informative and educative video indeed. Got the job done. Thank-you.
and i appreciate the feedback and support for the channel so i can continue making videos and answer comments :)
You are awesome! I'm technological idiot and very clumsy person. Thanks to Your video step by step I cleaned my laptop, no part left, and it still working! Thank You!
im glad that my videos helped you out, if you need any extra help let me know , thx for the feedback.
Thanks man!! Because of you i was able to fix some problems in my laptop😉😉
great video! I had a problem with my power jack but thanks to your video I fixed it!
im glad that my video helped you out, if you got any question or request you can always ask. :)
What was the problem? Mine isn't charging
Superb tutorial, very easy to understand & helped me to understand how to remove bits for repair. Many thanks.
It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P
Should you have any questions or requests in the future, please don't hesitate to ask me.
So useful to have a tutorial for your exact device. ThNks so much!
Glad it was helpful! thank you for the feedback :)
Thank you so fucking much for explaining what directions you push stuff out to detatch parts while not making this video a fucking timelapse
I am able to remove and replace the battery for my laptop. Thank you .
im glad it helped you out :)
thanx! good job..
my pleasure, Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
if you got any questions or request feel free to ask.
Back panel is broken near power cable input(exactly behind the back of the left side diaplay leg!) and near air vent. What should I do. Also charging it is becoming difficult. Have to try again n again. Pulling out and putting in the charger pin again.
Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both!
Regarding your question, you will need to search on aliexpress.com and get a new back panel if you need a fix for it.
cheers🍻
Hi i found this video very helpful to replace my laptop keyboard thank you for this, i have a ideapad 300 15isk 80Q7 laptop with 1366x768 resolution screen can i upgrade the screen with FHD 1920x1080 one will it work, your reply would be very helpful in making a decision..
in order for me to help you i will need you to remove yout LCD screen and send me the exact model number or a pic of the sticker and check how many pins is the connector 20 o 30 pin
Very good video, thank you very much!!!
Thank you for the feedback and your support to the channel by a SUB :P
if you ever got any question or request feel free to ask me.
@@uFixTek You are welcome my friend, do you have another social media to follow you?
@@danielarmijo780 unfortunately im trying really had to keep up with channel as it takes a lot of my time, for recording editing and opening and reopening and answer comments and much more, my goal is to help as many people i can with this information as i see how many people get ripped off my tech supports and service centers. i still have not recovered any of my investments that has been gone into this channel, but as the saying goes " hope dies at the end"
i have upgraded my video quality to 4k and better audio and much more for this channel.
but for now im just gonna concentrate on this channel and help out as much as i can.
if you want to help out just a sub and pass the work would be good and appreciated :)
@@uFixTek wow that's very nice from you. With this video I was able to fix the broken hinge on my laptop and the 3.0 usb . Thank you!
Good video, tengo la misma Notebook Lenovo Ideapad 300 core I7, carcasas color plomo. He tenido mancha negra lado izquierdo de la mano, he probado, agua, jabón, alcohol, quitagrasa, etc, no ha salido con nada, como es plomo claro, no he podido quitar la mancha, ayuda por favor.
gracias por el apoyo , sobre tu assunto, mandame un photo
prnt.sc/
I did the process and fix my problem. Thank you, but by doing so, I seem to have disconnected my camera. I just can't figure were did I go wrong.
Glad it helped! 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
if you have any question or request in the future feel free to ask me.
the webcam connect via LCD connector remove the LCD connector and re connect.
@@uFixTek thank you for your quick answer! Can you tell me were is the lcd connector? Thank you again.
here it is: imgur.com/a/gGi9gsl
Hi sir can u please tell me what is the MAH of the battery is please. I have to purchase it please tell me the watt hour and the battery mah on this model . I have the same model.
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: you can place a extended battery compatible that give you much longer run time: 5200mAh/58Wh, model: L15L6A01
amzn.to/3AVcCPl
Can you show me how to upgrade the cpu pentium to i5.on ideapad 300 17isk
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: I'm sorry to inform you that the CPU is soldered on motherboard and its none upgradable, the motherboard is not made for CPU upgrade. :(
Hi, my ideapad 300 hinge is broken(where we put the screw its bloken from to sides near to the battery area), so i need to replace the back cover.Can i buy it online , what you recommend?
can you send me as much as picture you can take , so i can give a best option available. thx
@@uFixTek sure
@@uFixTek where i can send, is there an email address??may i know your email address??
How can I remove the DVD writer without disassembling all of the parts?
Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both!
Regarding your question, all you need to do is remove the mid screws under the laptop for the keyboard (it has a keyboard logo beside them).
then you will need to lift the keyboard (no need to disconnect), remove the screw for the dvd drive:
imgur.com/a/Any5eYL|
then pull out (slide out the dvd drive).
Should you have any further questions or requests in the future, please don't hesitate to ask me.
cheers🍻
Does it have M.2 or nVME slot on board?
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: unfortunately no it doesn't have any, you can only upgrade the HDD to SSD
Thanks for helpful tips..
Most welcome, thank you for the feedback
Amazing stuff my man. My friend tried to do a 180 with the screen and now the base pannel is broken. I found places to purchase the back pannel, do you suggest to upgrade the SSD? And/or the RAM too? To make it faster?
Glad I could help, and only with ssd upgrade you will see a 400% improvement, and the ram defiantly will help out of loading apps. thank you for the feed back and support :)
Thanks alot brother,
Referred your video to replace my laptop bottom cover.
I do have some questions though,I have same lenovo ideapad 300-15isk, i see wifi antenna at mark 0:56 cable kinda removed there, is it always like that? when i opened my laptop, if found it same as in the video, prior to opening the cover, I had good wifi strength, now it shows less wifi strength.any fix for that?
My mouse touch pad is not working now,keyboard and power button are working fine.need to replace mouse touch pad?
and finally, after reassembly,the LED lights are not aligned properly. any tricks for that?
thank you for the feedback,
#1. the wifi connectors they got loosen, grab the antena cables and snap them into the wifi connectors , and test the wifi strength, if the wifi bars are low interchange the connectors.
#2. your touch pad has no issue, the problem is the bios setting, go to bios setting and look for touch-pad and change to standard if its set on advanced, and if its on standard then test it on advanced. its a common issue.
#3. regarding the LED lights its not a big deal, but i need to see as many pics that you can provide. upload some to imgur.com/
good luck
@@uFixTek Hi,
Thanks for prompt reply,
Issue with touchpad was resolved, just reconnected the cables while system was on.
Here are the photos taken on various angles.
Link: imgur.com/TlVRsuC,imgur.com/qa0BQnw,imgur.com/xAswrUp
imgur.com/a/hV9D00A
ok im glad that got resolved, regarding you LED try to align the board a bit, it looks like its shifted to the left, all i can say remove the LED board and try too align sometimes they have a clean acrylic plastic make you didnt loose that. its clean maybe when you opened it it fell , i try to get my hands on the same laptop and once i do i will make a quick video for you. but for now you are on your own try to move around, but thats minimal issue. i will keep you updated soon. :)
@@uFixTek Much appreciated, i tried earlier,I just cant figure out how to align those lights, I didn't see this plastic piece you mentioned, perhaps i overlooked. Anyways, waiting for your video.
OKI, i do get few of this often in the store
is it possible to upgrade the ram from 4gb to 8gb, possibly more? i have the same lenovo
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: yes you can here is a video for it: ruclips.net/video/DaCDylG7ync/видео.html
if you want to know your max ram capacity check this video: ruclips.net/video/tKEJTkVth4Q/видео.html
@@uFixTek thank you!!
its my pleasure my friend
can we upgrade graphic adapter for this model ?
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: sorry my friend but the GPU is not upgradable or removable.
@@uFixTek i can do both 😂,
Okay thanks 👍🏻
i appreciate your support my friend :)
if you have any question or request in the future feel free to ask me.
Can you tell me what the tool use are using for open the screw? I would like to buy it ...thank you
thank you for the feedback, but this tool was send to me from manufacturing line, its not available to public :(, its the one they use in the assembly line.
ideapad 330 is the same way to disassemble??
Chien Dirk yes very very similar yo wont get lost trust me. 😋
Fantastic 👌
Thanks 🤗 thank you for your support and feedback my friend
hello it has only one ram slot?? it support 8gb DDR3?
one dim available only supports ddr4 sdram
Do you know if all 300-series Ideapads use the same power port? A power port on my 300 80Q70021US broke. I'm trying to find the right part to replace it but can't find any that claim to work with that precise model. Thanks!
they are use same jack but maybe they have a different connector to motherboard and thats very simple fix if you know basic soldering just connect negative to negative pins on motherboard, if you want me to draw and help you out i can.
you can buy this and adapt it to the laptop www.ebay.com/itm/Lenovo-IdeaPad-300-15ISK-80Q7-DC-IN-Power-Jack-Cable-DC30100LG00-ACLU1/113739076663?hash=item1a7b609437:g:gLgAAOSwjVZc0Fiw
Where is the link of other videos like removing battery
@6:12 you only need to remove two screws and the battery will slide out from back side:
prnt.sc/10pi42c
@@uFixTek yeah thanks you hahaha👍👍👍
your welcome , thank you for the support and feedback
does it have M.2 slot?
yes and no,
yes it has, but its occupied by WiFi card that is m.2 (pci-e)
you can remove the wifi card and use a usb wifi and place a mini m.2 ssd
they are very hard to find i only found few on ebay and alibaba
shorturl.at/civO5
good luck
Hey thank you so much for the Video!
Got a question. So i repaired my display hinges. After that two cable from the loading port got lost. I soldiered them back on. But it's either loading or turns on when I push the power button. Got any ideas ? Have a nice one
Clemens
you mean the power jack and the cables got disconnected and you soldered them back, and now its not turning on right?
@@uFixTek yes. No charging no power on
you need a multi-miter and you need to check if the voltage is passing tot he board and i hope you didn't solder the wrong way.
@@uFixTek okay fixed it. I soldered it right but had some rest electricity in the system (reststrom). After disconnecting the battery and pushing the power button it worked perfectly!
I have the same problem , in the jack wich pins are the red black and white ???? In wich order are they soldered back i mean
How to safely removed the touched pad
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: you need to heat up the touch pad with heat gun or hair dryer for 5min and then rip it out, it has a adhesive glue. its easy.
Tnx a lot to know😎😎😎😎
Hi sir. Does the ideapad 300 have the same casing as the 310?
Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: Yes 90% its the same logic , you won't have trouble.
@@uFixTek I just subbed sir. Thank you so much. One last question, do you think I can DIY rehouse my logic board for ideapad 300? This is my old laptop and I want to upgrade it to be in optimal condition.
what is that you exactly want to do you have 300 and a 310 or you need to transplant the case or you need to make your 300 faster? "DIY rehouse" i don't get it what you mean by rehouse :( sorry
@@uFixTek I need to have a new bottom and upper case for my Ideapad 300. It's broken over time, especially the hinges on the monitor. I figured it out though. :) i just ordered a new bottom and upper case. I just hope I am able to assemble it on my own. I don't have experience and I want to learn.
oh remove everything with confidence and you be fine, its like playing tetris :P
take your time and take picture as you go so you have a reference in case, its really simple and not hard it should be fun :) if you need any doing you can email me with images and i help you out.
Monitor how do i open the monitor?
i will make a video for it
Right side hinge of my laptop is broken, it damage the screen an the back case cover too. Where do i find replacement parts?
where are you located?
@@uFixTek india
only ebay my friend or alibaba
Tqu brother
fo shizle ma nizle :)
Hey is it possible to replace the whole body shell (not including the screen) of the laptop? I have the same model and its pretty beaten up hinges are rising, dc port barely working, paint chipped off, dents and cracks everywhere!
yes its all replaceable, but check the prices on ebay for parts. sometime s when you addup and see its not worth investing .
@@uFixTek thank you for the fast reply! Sadly for a person living in a third world country and starting college this august, I can't buy a new laptop :( I've already computed how much everything will cost (extra screws, port replacement, top and bottom shell replacement) its around a 100$, which is quite expensive! Thats like 2 months worth of grocerys for 1-5 people ( 1$ is worth 50 pesos)
@@uFixTek i hope you can make a tutorial on how to detach the screen from they body!
sure i will make a video, are you in mexico?, if so, im in queretaro :P
@@uFixTek hey! May i ask is the blue thingy at every end of the cables important? Im quite worried cause i accidentally removed the one in the trackpad cable!
only one slot of ram?
YES only one ram dim available. :(
Sorry sir for a noob question, but where is the processor I can't seem to see it
Ling exactly right at @6:01 im putting my finger on the cpu, remove the heatsink and its right there, its soldered on motherboard .
Can you share you screw driver link in amazon please i am building a pc soon and i will need it
Sorry to inform you that this screws i got them directly from assembly line in a factory in china. And also they broke down so many times its really cheaply made that’s why they don't sell them. There are many other brands and rechargeable. here are few good once that we used.
we have tested this screw drivers and they are really good:
amzn.to/2UEYZTS
amzn.to/3wur1in
amzn.to/3hUBNsN
@@uFixTek i can't thank you enough for your videos and your help with this matter thank you one last thing would be so kind and tell me if this product is suitable for building a pc and dissemble laptops
www.amazon.sa/dp/B0002YZZGS/ref=cm_sw_r_cp_apa_glt_i_2X7VRRTPRN4JNERSRS9A?_encoding=UTF8&psc=1
على الرحب والسعة يا صديقي, i would not recommend you that, get one of this:
the best(this model is the best):
bit.ly/2T0VUgB
this one is for cellphone and tablets:
bit.ly/3k6MxHk
@@uFixTek damn , i will be damned you speak fluent arabic?? Where you from brother
Iran but raised in Canada and i speak 5 Lang.
can you please share the keyboard code of the unit?
THE PART NUMBER IS: 5N20K13002
I watched to replace the display assembly. You seem to have left that part of the disassembly out!
the LCD its very very simple, you just have to use the opening tool to remove the screen bezel, no screws, then the LCD is holdup with 4 screws one on each corner, remove those and the lcd will come out, and remove the cable and place the new lcd. i will make a video for the LCD removal. thank you for the support to the channel
@@uFixTek I have the full display assembly, including hinges. Not just the display.
My kid spilled a lil water on keyboard.
Bro my keyboard types anything now by itself.
Keeps on typing on the log in screen.
Help!!
hank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P
regarding your question: you can't fix it , you only have two options:
#1. follow the video and @2:14 its were i disconnect the keyboard cable, you can remove the cable and not plug it in and leave it disconnected and buy a external usb keyboard.
#2. at the back of your keyboard there is a part number , mine is Spanish keyboard so the part number is (5n20k13002), if you have English keyboard your part number is different. once you got your part number search on ebay they have it all.
www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313&_nkw=5n20k13002&_sacat=0
@@uFixTek my part number is 5N20K13040
Does it mean keyboard hardware is gone?
It happened after i updated it Next morning.
Thanx for Quick reply👍🏼
yes my friend the keyboard is gone , its not repairable, just replace the entire keyboard and you are all set,
is.gd/qrLEgG
Hello...! I have Ideapad 300-14ISK that has 2 slots for RAM.
Since last week, I randomly got these reddish horizontal lines on my screen, or the whole screen becomes reddish like the green color is missing. I am not sure how it is happened, because since the past few months my laptop is always on my desk, I did not bring it anywhere at all.
The reddish horizontal lines comes very randomly. Even when I was just watching youtube or movie, I did not touch my laptop at all and the reddish horizontal lines appeared. Also if I try to press the sides of the screen, to close or open the screen, or use the keyboard I am unable to make the reddish horizontal lines to appear. So it's completely random.
I have the Windows 10 updated, drivers for Intel and AMD VGA chipset updated too, but I still got the problem randomly. So I am thinking it is hardware related. The screen looks fine so maybe it is the display cable. In your video you showed the display cable one end is near the fan, but the other end was not shown.
Would it be possible for you to create video on how to replace the display cable?
my friend i get a lot of laptop with the same issue and let me tell you its NOT your monitor or you flex lcd cable. as you said you have the AMD VGA version that means your model has a gpu soldered on board.
there for your problem is the GPU solder balls (100%),
if you open up your laptop you will see the GPU chip here:
imgur.com/a/VD9HKol
and all you need to do if you want to do it your self, do the following steps:
1 remove the motherboard remove the rams and the heat-sink,
2. isolate the gpu using a aluminum tape (not needed but its for extra protection)
how to isolate follow this videos @7:34
ruclips.net/video/LPThmVu9-JM/видео.html
there i show you how to isolate a gpu and then you want to heat the gpu in a room temperature plane (no air-condition or fan blowing )
you need to heat it up for 5min with hair dryer or heatgun
3. very very important to let it cool down for 10min by it self dont use fan to cool it or move it around.
4 apply thermal paste and you are all set.
good luck.
@@uFixTek Hi, thanks for the reply. I just want to double check on this because reheating the GPU solder balls sounds risky as I have never done it before.
My laptop has dual GPU chip onboard, namely Intel HD 520 and AMD Radeon M330. I have never played any games on this laptop, so I am under impression that Windows 10 only uses the Intel HD 520 GPU and the AMD Radeon GPU are pretty much unused.So I am wondering what could have caused the AMD GPU solder balls to become loose?
you only have one gpu and the HD is the built in your CPU, and when you have a GPU installed the intel HD premuch is not used.
and you dont need to play game to over heat the GPU, the solder balls can dry and crack under normal use too, its not that risky, unless you keep using the way it is till when you turn on and the screen stays off then 0% risk.
now i want you to do a "for sure test", find a tv or 2nd monitor and plug that in the hdmi or vga port and you should get the same result on the 2nd screen and if you dont then its not you GPU.
@@uFixTek I don't have another VGA monitor, I will need to buy an HDMI cable for TV first and then do the test.
So by using a TV, I will know whether the flex display cable is faulty or not, yes? The HDMI and VGA port are directly soldered on the mainboard, so I guess the signal does not go through the cable.
in the MacBook video, you did not cover the CPU with the tape. Why was that? I didn't catch your word.
what is the proper distance and angle for using a hairdyer? I have only a small one.
since you said not to use AC and fan, and not to move it around I presume the air flow might push the solder balls out of their intended places (then shorted it out)?
get an HDMI cable, and plug it in the hdmi is connected tot eh motherboard so if you get a good signal out to tv with no lines, then its your flex cable, but if you get the lines and stuff then 1000% its your GPU.
and regarding the not taping the cpu is because there is no harm done if you heat up the cpu too, it helps the cpu solders too.
your hair dryer must be set to max heat and it should be 1" in diameter, and you want to focuse it on top of the GPU directly with 1.5" of distance in 90 degrees angle.
you want it to be in a room temperature (not a cold room) because you dont want to cool it down fast, else you will get a crack on solders, the reason of saying not move it after heating is because when is hot the board is flexible and it can cause a solder join break.
therefor : 5-7min direct max set heat 1.5" distance and let it cool down for 5-10 min then remove the foil tape and test.
if you feel like heating the cpu there is no harm done. remember external heat up to 270c is not bad for the BGA chips.
the internal (working temps ) vs soldering the BGA temps are two different things. a BGA chip can handle up to 280c before it can burn,
but in order to power on and work it needs to be under 99c .
there for you can't damage a cpu without a heatsink if you at stock voltage, it will simply over heat and powers down.