Theoretically, you could to a total of four systems, using 90-degree offsets. Maybe more, but I think it would get really janky at that point. What would be really cool though, would be if you could get it to change channels, i.e. a marble goes around the track twice.
So a color sorter capable of handling two BPS, feeds into this, which could feed two separate sets of modules, merging at the end via something like the balldozer?
@@gamerkeks7997 it would be super cool there could be special lanes for ambulaces and shit like that but there must be something that makes this impossible
Awesome, you should design some kind of x axis pivot system on the center rotator that allows you to make it go up and down so you can do multiple tiers.
so i'm most interested in the ball elevator module, how do you make the balls go up without falling down on every rotation? I can see a bar circulating underneath, I can see that it pushes a piston upwards, do you use a rubber band and a lever of sorts to keep the ball in place until the next one pops up underneath it?
If the double loop one was gbc 1) It obviously wouldn't be a loop 2) You could tie it into the ball sorter and make it to where the different colored carts only carry a certain type of ball.
Very, very beautiful. Never stop. Though I don't know how many 1000's of dollars of Lego I've just been looking at. I hope your genius gets some income from this somehow. But anyway, never stop.
With that music I keep expecting someone to start pummelling the GBC with eggs and smash it with a big shovel before setting fire to it screaming as they do it...Akiyuki is How To Basic?
So cool. I kinda got freaked out when you started reconfiguring it, like, "NO !!!!" What is he doing? It was working perfectly. Then I calmed down. Excellent modular thinking.
It is a shame that those dials used to control the speed don’t have a technic pin slot so you can hook two of them up with a technic beam to be perfectly synced allowing for a smoother altering of speed.
Many aspects of Lego design are already being affected by 3D printing, opening up a wealth of new design opportunities. That is, for those folks wishing to take it to the next level.
you could add two more arms to every rotor and double the amount of carts... I'd love to see a ball having to go trough the track loop for times until it arrives at the output :D
On an an actual GBC, you could use this as a bit of an X crossing. The first pass takes it through with the ball hopper ramp dropping it onto another GBC stage. And then later on many stages later it places the balls back into this, but on the second portion that continues to drop balls on the next GBC stage.
The most inefficient way to move a Lego ball 40 centimeters across the room, yet it is just incredibly brilliant.
I'm sure there are worse
@@kacperozieblowski3809 using a tube system with a vaccum to move the balls up and around, there are a lot of them in aperture science
I have never agreed more
@@michaelfinlay1412 good example :D
@@kacperozieblowski3809 thanks!
Me: Yeah, that's a very long way, impressive, but...
Aliyuki: *pulls out second system*
Well, i expected something along the lines like that. But man was i blown away when he just simply DOUBLED the carriages X)
Akiyuki: Hold my Lego soccer balls mug XD
Theoretically, you could to a total of four systems, using 90-degree offsets. Maybe more, but I think it would get really janky at that point. What would be really cool though, would be if you could get it to change channels, i.e. a marble goes around the track twice.
Nice! You should feed this with the color sorter. It’s a module that wouldn’t just mix the colors again as soon as they’re sorted.
Thats also what I had in mind.
So a color sorter capable of handling two BPS, feeds into this, which could feed two separate sets of modules, merging at the end via something like the balldozer?
What's the fail rate of those? I've seen them fail.
The sheer beauty of perfect mechanical synchronization. The modularity of the whole system is superb.
Classic Akiyuki
@@Spooglecraft Yep he's my friend
Amazing stuff. I wonder... surely it must be possible to double up again to a 4-loop system?
Ok
How about we forget roads and cars altogether and make this out main way of tranport????
@@gamerkeks7997 it would be super cool there could be special lanes for ambulaces and shit like that but there must be something that makes this impossible
Based on the way the interface works, you could theoretically have TWO MORE in-and-outputs. I'd like to see someone do that.
I never clicked so fast in my life
Lego Master Builder lol true
I've never seen a comment resembling yours in my life!
It’s crazy how much you can customize it! You did a really good job with this contraption. I’m so impressed by your skills. Keep up the great work !
もし、ボールを色で判別する装置がまだあったら、それを組み込んだらすごいことになりそうですね
he has to much power for one man
He's over here living in creative mode
*too
oops my bad
The modularity is impressive!
EDIT: Also, the speed! So much precision to get it right every cycle...
Me when I saw the title: "Ohhh YEEEEEEEESSS"
This would be awesome at a convention as a crossing junction for a figure 8 gbc.
This guy is truly a master!
この男は本当にマスターです
sure 私もそうおもいます
Awesome, you should design some kind of x axis pivot system on the center rotator that allows you to make it go up and down so you can do multiple tiers.
すごい！ずっと見てしまう。
Djjsnsn Google clase códigos como vi no vi no no no no no no no bby r lo p de mi de Milo de ni
Excellent work! I wonder if you could change the track elevation and have the movement arms articulate vertically.
Nobody:
Literally no one:
Akiyuki: *_Extended Peanuts_*
My peanuts are indeed extended after watching this beauty.
Lego should put together and sell Akiyuki kits , they are so clever and interesting!
2倍速にすると面白いw
全力で動くロボットみたいですねw
そのレールはなんのパーツですか？
なんかすこ
Hi
Henlo
"Extended Peanuts 1 looks too intense for me."
これは新しい輸送機関として使えるんじゃ！？
と思ったけどG強すぎて絶対吐くわ。
どうしたらそうなるのか俺にはわからない。いまマジですごいんやけど
Your works are always masterpiece :)
Mind blown! What an amazingly versatile design!
so i'm most interested in the ball elevator module, how do you make the balls go up without falling down on every rotation? I can see a bar circulating underneath, I can see that it pushes a piston upwards, do you use a rubber band and a lever of sorts to keep the ball in place until the next one pops up underneath it?
Peanut harder, peanut better, peanut faster, peanut stronger
Hi
You are so Goooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooood😍😍😍😍👍
What an incredibly cool gbc contraption, amazing!
Amazing work, you truly are the king of GBC modules!
If the double loop one was gbc
1) It obviously wouldn't be a loop
2) You could tie it into the ball sorter and make it to where the different colored carts only carry a certain type of ball.
Man:buliding*
4 year old:whoa
Later:
4 year old:has made a really bad robot out of it*
すごくて賢い！あきゆきさんは良いキャリアがありますね、そのたくさんＬＥＧＯがちょっと高いだと思います。（下手な日本語はごめんなさい）
Now he's just playing with it
Reminds me of a Hilbert Curve (en.wikipedia.org/wiki/Hilbert_curve)
Based on the way the interface works, you could theoretically have TWO MORE in-and-outputs. I'd like to see someone do that.
Very peaceful to watch
Hehe, extended peanuts
なんか笑える
❤
unlimited peanuts
レゴとは
Amazing!!
Mind blown
I love the row of cams under the stairs of the feeding system!
_Spin_
ワオ wow !
you think it possible to make a lego clock
All of the iterations are incredible, and I don't know which one is my favorite
how do you like your peanuts?
E X T E N D E D
*Happiness noise*
guys you get free unlimited robux if you scream peanuts without the T as loud as you can😉😉😉😉😉
I'd love to see a design that incorporates the sloped track pieces in some way.
Very, very beautiful. Never stop. Though I don't know how many 1000's of dollars of Lego I've just been looking at. I hope your genius gets some income from this somehow. But anyway, never stop.
This is amazing
"Honey? Why did you spend $100 dollars in batterys?"
Still can't make Legos moving parts but even if I did how to make a Lego mechanical hand LOL
遠心力でボールが飛びそうなもんやけどよく飛ばないな
Thanks to my friend Akiyuki he's good at building
With that music I keep expecting someone to start pummelling the GBC with eggs and smash it with a big shovel before setting fire to it screaming as they do it...Akiyuki is How To Basic?
You are a genius and a mad man!! 👍🏼
If you only use purple, orange, pink and yellow you get a colorful prize bonus in roller coaster tycoon
you can just hear them say "ah..." in their head. 1:45
Excellent!
What about trying to make a peanuts vertical tower
I wanna see how much he spends on LEGO bricks monthly.
What's this background music?
a few more RPMs and it beginns to take off
Sweet! :D
tuyệt vời
Beautiful!
So cool. I kinda got freaked out when you started reconfiguring it, like, "NO !!!!" What is he doing? It was working perfectly. Then I calmed down. Excellent modular thinking.
Anya would be proud
I would like to know what soundtrack this is.
What background music is this?
It is a shame that those dials used to control the speed don’t have a technic pin slot so you can hook two of them up with a technic beam to be perfectly synced allowing for a smoother altering of speed.
Many aspects of Lego design are already being affected by 3D printing, opening up a wealth of new design opportunities. That is, for those folks wishing to take it to the next level.
you could add two more arms to every rotor and double the amount of carts...
I'd love to see a ball having to go trough the track loop for times until it arrives at the output :D
すごい!
Not only a great GBC but also a nice piece of music..nice👍👍
Say extended peanuts without the T I dare you
On an an actual GBC, you could use this as a bit of an X crossing. The first pass takes it through with the ball hopper ramp dropping it onto another GBC stage. And then later on many stages later it places the balls back into this, but on the second portion that continues to drop balls on the next GBC stage.
How does he do it. How does he come up with these designs.
Praise be the mechanical wizard!
It's just lego and ev3 pieces
Dude, you’re actually INSANE, THIS IS BONKERS!
You could use this to make a 4-way crossing! Awesome!
Looks like an E.
Will this be at the brickworld convention in Michigan? I would love to see it irl.
Where to get the track? And more importantly the balls! I have a lot of other parts just no tracks and pun somewhat intended no balls!
I think it's roller coaster tracks :)
You make a lot of ball contraptions.
This could be used as a sort of crossing for two ball contraptions, all at the same level and even the same track... Man, you're a genius
I think the second-to-last configuration would be even better if it were rearranged into one continuous loop.
When you need Robots to play with Lego while you are too busy building them ;]
In IT that’s called Multiplexing 🤓 Well done!