OP 900 Err6 / Calibration

How to clear error 6 on a floor scale? This video helps with Err6 on a floor scale.
This will also help with Optima scale op 900 calibration. Same steps for op-900b as well.
How to fix Err6 / Calibration on OP-900
For new cable Email:
[e-mail]
For more help Email:
[e-mail]
Timestamps:
0:00 Inspect wires and scale platform
2:08 Calibration
8:56 Check out how to fix floor scale video for repair help

[@wadesherman1477]

Legend for making this!! Thanks

[@williamvega4862]

Best video man helped me out alot

[@optimascale6851]

Thanks for being a customer.

[@ethanengle7927]

Hey man, great videos. I do have a question about error 3 and 4 for the 900b ex. As well as when a scale head is powered on and just has dashes and won’t let me do anything.

[@optimascale6851]

error 3 is input signal is negative. This usually happens when the green and white wires are swap and giving a negative signal. You can check the C15 setting to see how it responds to weight. The video on the channel called how to fix a floor scale explains more about this.
error 4 happens when weight is unstable. Usually customers put too many decimals that their scale can't handle. Try to use less decimals and try out. If it still happens then probably damaged cable to readout. Check C15 setting as well.
I haven't seen the dashes probably overload or short in cable. Try to go into settings and recalibrate.
email: [e-mail] for any specific questions you have.

[@lolofranco5975]

Hola estimado amigo,podrías indicarme las configuraciones para poder calibrar un indicador de peso para ganado op-900 ?

[@optimascale6851]

C01-2
C02-0
C03-1
C04-5000
C05-1
C06-1
Tengo un manual en español en nuestro sitio web aquí.
www.optimascale.com/manuals
Thanks,
Anthony

[@lolofranco5975]

@@optimascale6851 hermano,con mucha sinceridad agradezco el tiempo que te has tomado para contestarme.Te comento rápido,que yo calibré esa báscula la cual se usa para pesar ganado y el punto está que una vez calibrada cuando se realiza prueba de peso con una res el peso se mantiene oscilante,no estable.podría ser falta de configuración en la sensibilidad?

[@javiermarino3662]

INDICADOR BKCscales calibration please

[@optimascale6851]

This is for calibration. Si busca a alguien que pueda ayudar en español puede llamar al 1.800.360.9619 ext. 2 tenemos gente aquí que puede ayudar.

[@hamzahfc8490]

Vc 50 cely err6

[@fakboii6988]

Error 4? Plis

[@fakboii6988]

T scale err4

[@optimascale6851]

Happens when weight is not stable. Make sure your test weight isn't moving. If it is not moving then check the wiring in the junction box in the platform. It could be 1 wire loose. Watch my how to fix a floor scale video on more details.
Thanks,
Anthony

[@fakboii6988]

@@optimascale6851 thank you, for showing me how to overcome it

[@daleskiballadares8387]

Espani