Very informative video! Is there a way to have Accel/Decel control just like in the video with a p1000 PLC and a P1-04PWM Card while maintaining the desired amount of pulses? Regards, Basel
I suppose wit enough effort anything is possible ... BUT ... stay tuned. Rumor has it that the Productivity family of PLCs is about to get an upgrade this summer that will probably do exactly what you want with very little effort on your part!
@@automationdirect That's great! Can't wait for it. May I have a hint if it's going to be involving a productivity suite update or a new special high speed output card? I'm on the edge of getting a bunch of 04PWM cards for my steppers. *Shy face* Keep up the good work! Basel
Thanks for this really helpful video. At 2:42 you said the Productivity2000 controller gives out 500,000-1,000,000 pulses/sec. I can't find this information in their hardware specification anywhere. How can I find out the number of pulses my controller gives out???
Hi Raymond, You can find that spec on page 3 of this document cdn.automationdirect.com/static/specs/p2hso.pdf in the table "Pulse Output Specifications" under: Maximum Switching Frequency"
Hi, great explanation, but at 4:47 where do the 0.25 and 1.25 seconds come from ? and if we have a 5 seconds duration instead of 1.5sec , how do we know how much triangles we have in the area ?
Hi DoubleRhonRhon, That was an arbitrarily chosen acceleration time. You would put whatever acceleration time you have for your system, of course ... It was convenient that that time evenly divided into the total time ... made the math a little easier ...
@@automationdirect Thanks for answer. I'm novice with stepper motors. I suppose the acceleration time will depend on the motor model, and on the torque required for the movement, and the average rpm required. a lot of things ?
Hi. I allready have a cnc machine with parallel port that I want to upgrade. I was planing on installing a MASSO controller but I don´t know which stepper motor X,Y,Z and Spindle drivers to buy . The stepper motors are Sanyo Denki , Step-Syn :Type:103-770-6 . DC=5.1V . 1.0A. 1.8 DEG/Step. spindle motor 100 Watts 500 : 15000 rpm.
Hi Mistura, I could give you some general guidance, but it sounds like you are looking for specific answers .. so … I'm going to encourage you to contact our free tech support team. You can reach them by phone, e-mail or our on-line system. Go here to see all of your options: support.automationdirect.com/techcontact.html And for support tin general - go here: support.automationdirect.com/
Hi there, thanks so much for sharing this helpful video, I'm little confused at the step dividing the isosceles trapezoid into 10 pieces, why is that not 12 or 14 cuz the speed would be different if we separate it into another number of pieces? Please help me out, thank you so much.
The first triangle is created by the duration of the acceleration time. Then you see how many of those fit into the rectangle and then add one for the decel time. So the number of triangles depends on the duration of the rectangle. The longer the motor runs, the more triangles you will need. In this example it turned out to be 10. This assumes that acel and decel are the same, of course. There are a lot more videos like this at www.automationdirect.com/videos. Just type what you are looking for in the search bar.
Great video with one thing missing. You seem to arbitrarily move the rpm of the motor up to account for acceleration and deceleration. Can you explain how to move the line and to where. I am a little confused as to how you picked that new hight.
@TheKlickitat - Thanks for the comment! Are you referring to the 720 rpm at time 6:41 in the video? That number isn't arbitrary ... it is calculated starting at about 3:58 in the video. Is that what you were looking for?
Those curves are in the specification sheets for each motor. For example, 1. go to Automationdirect.com, 2. click on "Motion Control" in left column 3. Click on "Stepper Systems" graphic in center of page or on "Stepper Motor" in left column, first bo (scroll down inside box) 4. Select the motor you want (the filers on the left help a lot!) 5. Click on "Specifications" The curves are in there.
@Ariel Chavnarria Alarcon, The 4th edition was used in this video. You can find the 5th edition, which contains all of the original material, plus more, at this link: cdn.automationdirect.com/static/manuals/surestepmanual/surestepmanual.html
You are welcome! Did you know that we have over 1500 automation tutorial videos at: www.automationdirect.com/videos ........... by topic www.automationdirect.com/cookbook ..... by subject
Hi Donald, That depends on your application. In general, a servo will be higher performance and higher featured than a stepper. That usually comes with a higher price (and complexity - encoder feedback, etc). A stepper will usually be more cost effective. And it holds position without any “dithering” like a servo may have.
Yes, they are different. The controller sends the commands (usually pulses) to the drive. The drive then converts those to the high current signals needed to drive the stepper motors.
Pl help me design a '1person chair lift' to elevate and ground 100 kg. between 1st &ground floor (10 ft. height), using a stepper motor. supply 230v 50Hz.
That's a bgger discussion than can be coverd in these simple RUclips comments. Please contact AutomatioNDirect's free tech support during regular business hours - they will be happy to help. Learn more about your support options here: ruclips.net/video/IcbG7HKxzRE/видео.html
Appendix C example 2 = (45 mm ÷ (10 mm/revscrew ÷ 1 revmotor/revscrew)) x 1000 steps/revmotor = 4500 pulses.... why did you multiply the distance to be traveled by the rest?
@Andreas G, thanks for the comment. Very good question! These are the same equation, what is used in the video is the simplified version, which I believe is more straight forward when you are involving fractions. Notice in the equation in Appendix C, Dload/i = 10 mm/REVscrew. To divide a fraction you take the inverse and then multiply. For this example, the inverse would be 1/10 Revscrew/mm. This is what was done, in the video, the 1 rev/0.2 inch is the inverse of the Dload/i, and then that term was multiplied.
@@automationdirect Hey, in the video, screw pitch is mentioned as 0.2 inches. but the same time you said "each rotation moves the screw 0.2 inches." So, isn't that dload? since P=1/dload, isn't screw pitch is 5 rev/inch ?
Hi Madesh, The 30,000 pulses is derived from the physical constraints shown in the equation at 2:09 in the video. We needed to move 3 inches using the given threaded rod, the math then tells us we need the 30,000 pulses to move the 3 inches. If you need more help, please contact our free tech support. The will be happy to help you. You can reach tech support here: www.automationdirect.com.
Thank you for watching! For technical questions like this, please contact our free award winning tech support. They are setup to give you the most efficient and quickest support. Phone: 1-800-633-0405 Email: www.automationdirect.com/adc/Form/User/TechInquiry Support: support.automationdirect.com/ Please let us know if you have any other questions! Thanks, AutomationDirect
10 rev/s = 10*60 rev/m =600 rev/m Another way: At 2:17 you have 20.000 pulses/Sec thats frequency [Hz] f=20000 Hz At 2:05 you have steps per rev or pulses per rev : S=2000 So according to Takashi Kenjo formulas: N=60f/S =(60*20000)/2000 = 600 RPM (rev/minute)
Pl help me design a '1person chair lift' to elevate and ground 100 kg. between ground &1st floor (10 ft. height), using a stepper motor. supply 230v 50Hz.
really great. thanks
Thank you for watching - we're happy we could help!
Thanks for the video. Very straight forward, well done. I vote for the metric system though
Thanks for the comment! Check out more of our products on www.automationdirect.com/adc/home/home
please make same type of video in rack and pinion!
Very informative video!
Is there a way to have Accel/Decel control just like in the video with a p1000 PLC and a P1-04PWM Card while maintaining the desired amount of pulses?
Regards,
Basel
I suppose wit enough effort anything is possible ... BUT ... stay tuned. Rumor has it that the Productivity family of PLCs is about to get an upgrade this summer that will probably do exactly what you want with very little effort on your part!
@@automationdirect That's great! Can't wait for it. May I have a hint if it's going to be involving a productivity suite update or a new special high speed output card?
I'm on the edge of getting a bunch of 04PWM cards for my steppers. *Shy face*
Keep up the good work!
Basel
Thanks for this really helpful video. At 2:42 you said the Productivity2000 controller gives out 500,000-1,000,000 pulses/sec. I can't find this information in their hardware specification anywhere. How can I find out the number of pulses my controller gives out???
Hi Raymond, You can find that spec on page 3 of this document cdn.automationdirect.com/static/specs/p2hso.pdf in the table "Pulse Output Specifications" under: Maximum Switching Frequency"
Hi, great explanation,
but at 4:47 where do the 0.25 and 1.25 seconds come from ?
and if we have a 5 seconds duration instead of 1.5sec , how do we know how much triangles we have in the area ?
Hi DoubleRhonRhon, That was an arbitrarily chosen acceleration time. You would put whatever acceleration time you have for your system, of course ... It was convenient that that time evenly divided into the total time ... made the math a little easier ...
@@automationdirect Thanks for answer. I'm novice with stepper motors. I suppose the acceleration time will depend on the motor model, and on the torque required for the movement, and the average rpm required. a lot of things ?
@@DoubleRhonRhon Yep, you nailed it. Plus the MOST IMPORTANT PARAMETER - it has to do what YOU want it to do!
Hi. I allready have a cnc machine with parallel port that I want to upgrade. I was planing on installing a MASSO controller but I don´t know which stepper motor X,Y,Z and Spindle drivers to buy . The stepper motors are Sanyo Denki , Step-Syn :Type:103-770-6 . DC=5.1V . 1.0A. 1.8 DEG/Step. spindle motor 100 Watts 500 : 15000 rpm.
Hi Mistura,
I could give you some general guidance, but it sounds like you are looking for specific answers .. so … I'm going to encourage you to contact our free tech support team. You can reach them by phone, e-mail or our on-line system. Go here to see all of your options: support.automationdirect.com/techcontact.html
And for support tin general - go here: support.automationdirect.com/
@@automationdirect Yes I am looking for especific answers and I am going to follow your advise. Thank you very much for your attention and help.
Hi there, thanks so much for sharing this helpful video, I'm little confused at the step dividing the isosceles trapezoid into 10 pieces, why is that not 12 or 14 cuz the speed would be different if we separate it into another number of pieces? Please help me out, thank you so much.
The first triangle is created by the duration of the acceleration time. Then you see how many of those fit into the rectangle and then add one for the decel time. So the number of triangles depends on the duration of the rectangle. The longer the motor runs, the more triangles you will need. In this example it turned out to be 10. This assumes that acel and decel are the same, of course. There are a lot more videos like this at www.automationdirect.com/videos. Just type what you are looking for in the search bar.
Great video with one thing missing. You seem to arbitrarily move the rpm of the motor up to account for acceleration and deceleration. Can you explain how to move the line and to where. I am a little confused as to how you picked that new hight.
@TheKlickitat - Thanks for the comment! Are you referring to the 720 rpm at time 6:41 in the video? That number isn't arbitrary ... it is calculated starting at about 3:58 in the video. Is that what you were looking for?
thank you for explaining what I missed
Could anyone tell me where can I get those graphs to compare the speed?
Those curves are in the specification sheets for each motor.
For example,
1. go to Automationdirect.com,
2. click on "Motion Control" in left column
3. Click on "Stepper Systems" graphic in center of page
or on "Stepper Motor" in left column, first bo (scroll down inside box)
4. Select the motor you want (the filers on the left help a lot!)
5. Click on "Specifications" The curves are in there.
where can i find the manual u use to make this video? can't find it on your website.
@Ariel Chavnarria Alarcon, The 4th edition was used in this video. You can find the 5th edition, which contains all of the original material, plus more, at this link: cdn.automationdirect.com/static/manuals/surestepmanual/surestepmanual.html
Very nice video
Good job
Thanks! Did you know we have over 1000 automation videos like this at www.automationdirect.com/videos? Check it out!
Thank you so much!
You are welcome!
Did you know that we have over 1500 automation tutorial videos at:
www.automationdirect.com/videos ........... by topic
www.automationdirect.com/cookbook ..... by subject
what is the best drive a stepper or servo mortor?
Hi Donald, That depends on your application.
In general, a servo will be higher performance and higher featured than a stepper. That usually comes with a higher price (and complexity - encoder feedback, etc).
A stepper will usually be more cost effective. And it holds position without any “dithering” like a servo may have.
Pleasa I need your hlep I have cnc X part =70kg. And part of Y=150kg. How match toirque of motor do I need thanks
Part II of this video shows you how to calculate the torque required. See if that answers your question ...
@@automationdirect thinks alot
Are drives and controller different? If so, could someone explain it briefly?
Yes, they are different.
The controller sends the commands (usually pulses) to the drive. The drive then converts those to the high current signals needed to drive the stepper motors.
Pl help me design a '1person chair lift' to elevate and ground 100 kg. between 1st &ground floor (10 ft. height), using a stepper motor. supply 230v 50Hz.
That's a bgger discussion than can be coverd in these simple RUclips comments. Please contact AutomatioNDirect's free tech support during regular business hours - they will be happy to help. Learn more about your support options here: ruclips.net/video/IcbG7HKxzRE/видео.html
Appendix C example 2 = (45 mm ÷ (10 mm/revscrew ÷ 1 revmotor/revscrew)) x 1000 steps/revmotor
= 4500 pulses.... why did you multiply the distance to be traveled by the rest?
@Andreas G, thanks for the comment. Very good question! These are the same equation, what is used in the video is the simplified version, which I believe is more straight forward when you are involving fractions.
Notice in the equation in Appendix C, Dload/i = 10 mm/REVscrew. To divide a fraction you take the inverse and then multiply. For this example, the inverse would be 1/10 Revscrew/mm.
This is what was done, in the video, the 1 rev/0.2 inch is the inverse of the Dload/i, and then that term was multiplied.
I got it, the old maths tricks transposed eq... And flipped technique... Very useful to remember them
@@automationdirect Hey, in the video, screw pitch is mentioned as 0.2 inches. but the same time you said "each rotation moves the screw 0.2 inches." So, isn't that dload? since P=1/dload, isn't screw pitch is 5 rev/inch ?
how do you consider that 30,000 pulses are sufficient??
Hi Madesh, The 30,000 pulses is derived from the physical constraints shown in the equation at 2:09 in the video. We needed to move 3 inches using the given threaded rod, the math then tells us we need the 30,000 pulses to move the 3 inches.
If you need more help, please contact our free tech support. The will be happy to help you. You can reach tech support here: www.automationdirect.com.
please i need the reference which you used
Hi Abdelrahman - I'm not sure what you are asking for - can you be more specific?
how to select stepper motor for rack and pinion
Thank you for watching! For technical questions like this, please contact our free award winning tech support. They are setup to give you the most efficient and quickest support.
Phone: 1-800-633-0405
Email: www.automationdirect.com/adc/Form/User/TechInquiry
Support: support.automationdirect.com/
Please let us know if you have any other questions!
Thanks, AutomationDirect
from where you get the 600 rpm ?3:39
@Anwar Alfaqeeh Alhusseini, thanks for the comment. The 600 rpm is obtained through the equation explained from 3:20 - 3:39.
thank you for replaying to me >>>indeed you tube is what i need >>>put i dont understanding >>>because an weak in English
thank you again
10 rev/s = 10*60 rev/m =600 rev/m
Another way:
At 2:17 you have 20.000 pulses/Sec thats frequency [Hz] f=20000 Hz
At 2:05 you have steps per rev or pulses per rev : S=2000
So according to Takashi Kenjo formulas: N=60f/S =(60*20000)/2000 = 600 RPM (rev/minute)
Hadis Adili thanks 🙏
I understand it
10rev/sec*60sec=600rev/m=600rpm
It’s not yuck, it’s MATH. Yum!!!
😂
Pl help me design a '1person chair lift' to elevate and ground 100 kg. between ground &1st floor (10 ft. height), using a stepper motor. supply 230v 50Hz.
Thanks for the comment Mahesh. For this type of in-depth help, please call into our tech support help line at 1-800-633-0405.