Nice to see back with the 2wd slash bud as far as I’m concerned what you managed to do with the slash body is right up there or more impressive than any 200 plus mph run bud congrats from H and w racing channel
@@JamesGrates Thank you🙏 I have another "custom truck body" made, but it restricts me from using the side battery trays. Just wanted to take it off the shelf and push it again.
@@mydadsrcchannel934 I think I am going to dust it off soon.... I am running out of cars that don't need parts at this rate. : ) What do you like about the GRP vs the foams on front/vs rear?
@@BriansRCStuff if you watch my earlier videos my second Slash was called "Spare Parts" well all those Spare parts pushed it to the world record. And with foams on the front the ride height changes and the blow overs will start. Don't fix it, if it Ain't broken😁
@@calumwarbrooke1767 thank you 🙏 These old bodies were pretty once.... They've been through alot of wrecks. Not shown on Camera🤣 Had to wipe the Dust off this one
Dude! Good to see ya back on the road! I've literally spent the last 2 years trying to get my 2wd slash to at least match your numbers. I did find a longer road to run but still only hitting 118. Solid run brother! Did u ever get the truck version rebuilt?
@@mydadsrcchannel934 The balls to just send it I guess lol is what it comes down to cuz it seems like there's plenty left in it. Been working on a different project the better part of this season too so kinds been running that more lately
@@MikeGray-ct6hb all motors are TP3650. This motor I'm running low voltage, as it's a 5600kv pulling 555 amps, have to use an XLX2 Esc. The gearing is 33 spur 25 pinion and was over geared this last run. Hopefully Sat or Sun i cant regear and make another run. The other motors were a 2060kv for the GT and a 3080kv for the Truck.
Mannnnn I gave up on my 2wd slash build after putting almost 1500 into it. Just weak link after weak link and then blow over after blow over. I settled at 60mph, didn’t change anything just limit the power on my controller to 65%. I did get new grand national body for it tho I haven’t put it on yet, it might be more aerodynamic and hopefully let me turn it up a little more without having blowovers
Good to see you back man, we both got the same body’s hell ya
@@2wdSpeedCar push it👉💣💥
Very nice setup and pass!
@@scaleworksRC Thank you🙏
Nice to see back with the 2wd slash bud as far as I’m concerned what you managed to do with the slash body is right up there or more impressive than any 200 plus mph run bud congrats from H and w racing channel
@@JamesGrates Thank you🙏
I have another "custom truck body" made, but it restricts me from using the side battery trays.
Just wanted to take it off the shelf and push it again.
Damn, nice clean run! Interesting with the foam/GRP combo.
@@BriansRCStuff thanks
2wd, only 2 tires pushing and 2 tires braking.....
Push that Bandit
@@mydadsrcchannel934 I think I am going to dust it off soon.... I am running out of cars that don't need parts at this rate. : ) What do you like about the GRP vs the foams on front/vs rear?
@@BriansRCStuff if you watch my earlier videos my second Slash was called "Spare Parts" well all those Spare parts pushed it to the world record.
And with foams on the front the ride height changes and the blow overs will start. Don't fix it, if it Ain't broken😁
Your paint is amazing mate you must spend a whole polishing 😂
@@calumwarbrooke1767 thank you 🙏
These old bodies were pretty once....
They've been through alot of wrecks.
Not shown on Camera🤣
Had to wipe the Dust off this one
Dude! Good to see ya back on the road! I've literally spent the last 2 years trying to get my 2wd slash to at least match your numbers. I did find a longer road to run but still only hitting 118. Solid run brother! Did u ever get the truck version rebuilt?
@@MikeGray-ct6hb this is the Truck version rebuild underneath, using the GT body so I can fit 2 batteries
@@MikeGray-ct6hb what's holding you back?
@@mydadsrcchannel934 The balls to just send it I guess lol is what it comes down to cuz it seems like there's plenty left in it. Been working on a different project the better part of this season too so kinds been running that more lately
Btw what motor kv and gearing were u running here? Guessing like a 3600 or so and 26/34???
@@MikeGray-ct6hb all motors are TP3650. This motor I'm running low voltage, as it's a 5600kv pulling 555 amps, have to use an XLX2 Esc. The gearing is 33 spur 25 pinion and was over geared this last run. Hopefully Sat or Sun i cant regear and make another run. The other motors were a 2060kv for the GT and a 3080kv for the Truck.
Mannnnn I gave up on my 2wd slash build after putting almost 1500 into it. Just weak link after weak link and then blow over after blow over. I settled at 60mph, didn’t change anything just limit the power on my controller to 65%. I did get new grand national body for it tho I haven’t put it on yet, it might be more aerodynamic and hopefully let me turn it up a little more without having blowovers
@@AquariumAficionado do you have it on your channel? I'd like to see your Slash. I can give you some help
@@mydadsrcchannel934 it’s posted on my channel! I’d appreciate any advice you have
@@mydadsrcchannel934 I have it posted as RUclips shorts never made an actual video