I've had my table two years now and these latest videos are by far the most helpful thing I've come across. It would be great if you could do a step by step video on how to dial in a machine as best as possible. For example, using the tests to determine best cut speeds, voltages, and heights. From start to finish and what to look out for.
Slm we have CNC plasma machine machine sensör sees the metal then goes up to the given height but does not come down again the reason what can you thank
Hi I need your help In my workshop I have a plasma machine 'Airliquide Optitome 20 60 HPI' and with regard to height control, the machine pays off on the way up but now it does not pay off on the way down if the plate is irregular. I think a problem in measuring the potential difference and I don't know how to solve it. Can you help me? I can send video. Regards
Hi thanks for videos, they are very helpfull. I have a question, why the thorch need to touch the plate before every cut? why can't we just mesure the voltage and start cutting? I search the internet and couldn't find.
as i know, plasma is a discharging form between two electrode + /- 1. torch need to touch the surface to make sure it finds the plate and accurately retracts to the proper pierce height. 2. voltage can not be measured without it occurs and feed back, that why we let torch touch the plate before every cut :(
hi , thanks for video , very instructive , please to tell me if better use THC high frequency arc pilot or blowback arc pilot , the blowback could be HT not HF please to confirm that for cnc use ,the cutter must includes voltage divider ,as connection wiring i have cnc plasma but old one without thc, need to add , thc and replace the cutter please to advise and contact me for purshase ,thanks
That was a great explanation. The speaker did a very professional job. Thank you.
I've had my table two years now and these latest videos are by far the most helpful thing I've come across. It would be great if you could do a step by step video on how to dial in a machine as best as possible. For example, using the tests to determine best cut speeds, voltages, and heights. From start to finish and what to look out for.
2:44 Hypertherm plasma torch in a Lincoln Electric video?
Hi my cnc plasma torch is not auto adjusting height. Heat could be a reason?
Slm we have CNC plasma machine machine sensör sees the metal then goes up to the given height but does not come down again the reason what can you thank
hi. may I ask how to reduce taper?
Доброго дня. Не знаете ли Вы, есть ли подобная система контроля высоты инструмента в фрезеро-гравировальных станках?
what are the required PPE for this machine
Thanks for the information ❤
Hi I need your help In my workshop I have a plasma machine 'Airliquide Optitome 20 60 HPI' and with regard to height control, the machine pays off on the way up but now it does not pay off on the way down if the plate is irregular. I think a problem in measuring the potential difference and I don't know how to solve it. Can you help me? I can send video.
Regards
need to cut , 5 mm aluminium plate with high quality cut , what do you think about , water table or water torch injection , thanks
hi friend need to buy new plasma cutter and add nex laser height control to my cnc , is it possible to upgrate it , thanks for urgent reply
Hi thanks for videos, they are very helpfull. I have a question, why the thorch need to touch the plate before every cut? why can't we just mesure the voltage and start cutting? I search the internet and couldn't find.
as i know, plasma is a discharging form between two electrode + /-
1. torch need to touch the surface to make sure it finds the plate and accurately retracts to the proper pierce height.
2. voltage can not be measured without it occurs and feed back, that why we let torch touch the plate before every cut :(
hi , thanks for video , very instructive , please to tell me if better use THC high frequency arc pilot or blowback arc pilot , the blowback could be HT not HF
please to confirm that for cnc use ,the cutter must includes voltage divider ,as connection wiring
i have cnc plasma but old one without thc, need to add , thc and replace the cutter please
to advise and contact me for purshase ,thanks
i m problm to controll hight
Thanks a lot.
This is very similar to TAST when welding.
👍