Thank you again for the videos! I work at Supercuts (😩) until I can get the skills and clientele to move to a barber shop, today a client came in to get a skin fade because his barber was booked.... he thought I did a good job and asked where I learned and I was like, “Ant the Barber”! I did everything like you, I combed the hair in the natural direction first, made the bald guideline, and the neckline I left natural like you said, but I just cleaned it up a bit. He loved it! He said for me to tell you thank you! 💛
I started watching your videos, I been debating on starting to cut hair I did go to school for it, never finished but my boyfriends been encouraging me to try it again. & I wish I would’ve had you as my teach I probably would’ve finished!!
Whatttt a great RUclipsrrr braaaa may god bless you man I been stressin about gettin the guild line remove and look I found you and you showed me what to do with the side affects what a gggggggg , best RUclipsr rn probably
I use to be a barber fresh out of high school back in the late 80s early 90s. I stopped cutting for physical/health reasons. Because of the pandemic, I had to bring out my old school skills and ended up developing a clientele at work. A coworker asked me about a 1 inch taper fade. I've never done that before. I did it anyways but it was real hard considering how much space I had to work with. What recommendations do you have for such a complicated cut?
awesome video again, im having issues to take the number 1 line faded, when you are using that .5 wahl guard, do you dig into the 1 line about a 1/4 then close it half and break the other line we created ? im not sure if i am clear :P thanks alot for those vids!
I do it exactly how I explain it in the video I'm not in a position to answer you fully right now and I'm sorry . Watch anyone of my videos and I teach the same exact style 🙏🏽
Great cut as usual brother! Got a quick question for you pal, I just got the Alpha SC Clippers, only used them a handful of times; love the way they cut but if I don't spray them down with clippercide after the clippers been running for about 15minutes; the clipper itself does not turn on. Nothing happens unless I spray down the blade; I'm all about oiling the blades but I've never seen a clipper need it so often. I'm wondering, you've been using the Gamma Ergo for a while and if you experienced the same thing? I don't mean to bash Gamma at all, love their products, love their customer service but I been having a few bad apples on my end unfortunately. Thanks again brother!
yo ant. can u do a test video to test out some clippers. The clippers are kemei 1986 and surker k7s. They can be found on amazon. These clippers are like a budget clipper during this whole corona thing.
Yo Ant! Quick question bro,I recently bought a new andis electric shaver,and that shit burned my skin at my neck area,and also my son at the back of his neck.I checked the foil before using it and its solid perfect condition.Now im concerned about using it on my clients.Please help.I can send pics through ig of the shaver if you need! Thanks Bro you’re killing it!
I currently use magic clips, I'm thinking about getting a detachable clipper. Do you have any suggestions? Also how do you like the gamma ergo clippers? Thanks for the response!
ayy bro im 13 im tryna get int the barber industry love watching ur vids but i think the machines are expensive and i only have 150 straight up broke any tips my guy much love -jose
I spent $150 on some legends barber combo on amazon witch are $123 right now on sale. Best clippers i could of started with, good luck. Hmu if you need more info in merchandise and items. I literally spent less then $350 on everything from combs to capes, clippers, shaving gel and more.
Thank you again for the videos! I work at Supercuts (😩) until I can get the skills and clientele to move to a barber shop, today a client came in to get a skin fade because his barber was booked.... he thought I did a good job and asked where I learned and I was like, “Ant the Barber”! I did everything like you, I combed the hair in the natural direction first, made the bald guideline, and the neckline I left natural like you said, but I just cleaned it up a bit. He loved it! He said for me to tell you thank you! 💛
That's so dope , thank you for sharing that with me honestly made my night 😊🙏🏽
I'm a barber in cosmetology school trying to expand my horizons! God bless ant!
I'm a cosmetologist who favored barbering but I'm so thankful I took the route I did , blessings to you and yours 🙏🏽💯
Hold my client captive- lol- I love it! Thank you also for explaining areas where the client's head changes shape. Preesh.
Your welcome , appreciate the feedback and it makes me happy knowing someone is finding value in my content 🙌🏽
I started watching your videos, I been debating on starting to cut hair I did go to school for it, never finished but my boyfriends been encouraging me to try it again. & I wish I would’ve had you as my teach I probably would’ve finished!!
I appreciate hearing that , and it’s never to late … if it’s something that feels right GO FOR IT ✊🏽🙏🏽
Whatttt a great RUclipsrrr braaaa may god bless you man I been stressin about gettin the guild line remove and look I found you and you showed me what to do with the side affects what a gggggggg , best RUclipsr rn probably
Appreciate that 🙏🏽💯💯💯
Definitely love how you explain step by step and the reason for each step 🔥🔥🔥🔥 fade!!!!
Appreciate that 🙏🏽
Yezzz sir!!!! 💯💈
My fav barber with another great tutorial 👌 🔥
😊🙏🏽
I use to be a barber fresh out of high school back in the late 80s early 90s. I stopped cutting for physical/health reasons. Because of the pandemic, I had to bring out my old school skills and ended up developing a clientele at work. A coworker asked me about a 1 inch taper fade. I've never done that before. I did it anyways but it was real hard considering how much space I had to work with. What recommendations do you have for such a complicated cut?
Smooth blend, I especially like that you didn’t use any kind of enhancements.
Thank you Mark all organic cuts here 🙏🏽
Very nice haircut! ⭐⭐⭐⭐⭐
🙏🏽🙏🏽🙏🏽
do you find it beneficial to work on one side of the head at a time? or is that just for the vid? Thank you.
Just for the video 👌🏽🙏🏽
Is the ceramic blade better??? Clean fade btw but you already know that
I think it is I'm not a fan of those weird thin blades 👊🏼🙏🏽
Ant The Barber what about on the trimmers?
awesome video again, im having issues to take the number 1 line faded, when you are using that .5 wahl guard, do you dig into the 1 line about a 1/4 then close it half and break the other line we created ? im not sure if i am clear :P thanks alot for those vids!
I do it exactly how I explain it in the video I'm not in a position to answer you fully right now and I'm sorry . Watch anyone of my videos and I teach the same exact style 🙏🏽
Use the .5 fully open and attack right above the weight line you see from the 1 closed then fade down and close the lever as needed to fully blend out
Great cut as usual brother! Got a quick question for you pal, I just got the Alpha SC Clippers, only used them a handful of times; love the way they cut but if I don't spray them down with clippercide after the clippers been running for about 15minutes; the clipper itself does not turn on. Nothing happens unless I spray down the blade; I'm all about oiling the blades but I've never seen a clipper need it so often. I'm wondering, you've been using the Gamma Ergo for a while and if you experienced the same thing? I don't mean to bash Gamma at all, love their products, love their customer service but I been having a few bad apples on my end unfortunately. Thanks again brother!
Never had that issue but damn that sucks , have you talked to them about it ?
Dope nice blurry fade 🔥
Appreciate that Abraham 🙏🏽💯
Super crispy. Brother how long do your cuts usually take? I’m struggling to finish before an hour
Take all the time you need , I never rush any cut . I book out 45 for a haircut 1 hours full service .
yo ant. can u do a test video to test out some clippers. The clippers are kemei 1986 and surker k7s. They can be found on amazon. These clippers are like a budget clipper during this whole corona thing.
Great cut mate Blurrrrry! 👍🏻🥔
🙏🏽🙏🏽🙏🏽
dope cut bro
🙏🏽🙏🏽🙏🏽
Looks really good 👍🏾
🙏🏽🙏🏽🙏🏽
Yo bro , you killing me videos I see your back👍👍👍🔥🔥🔥
🙏🏽🙏🏽🙏🏽
Great content, great editing. Thanks man!
Thank you 🙏🏽🙏🏽🙏🏽
Yo Ant! Quick question bro,I recently bought a new andis electric shaver,and that shit burned my skin at my neck area,and also my son at the back of his neck.I checked the foil before using it and its solid perfect condition.Now im concerned about using it on my clients.Please help.I can send pics through ig of the shaver if you need! Thanks Bro you’re killing it!
Maybe your pressing to hard 🤷🏽♂️
Or you and your son are just sensitive in that area . If the machine is solid that what be all I can think of .
Ant The Barber thank you for replying! 🙏
Thanks for the tutorials 🙏🙇♀️🤩👌
Thanks for the support 😊🙏🏽💯
Can’t wait to try those ergos. Blurry cut bro! 🥶
Appreciate you 🙏🏽🙏🏽🙏🏽
That was great. Well explained. Just need guys heads to try it on lol. Tnx
😂😂👌🏽
Thanks Ant.
What are your thoughts on the cordless envy li bro?
Is there are reason you fade in 3 steps? The sides and then the back? I see a lot of barber do this. Is it any better?
Some prefer this way , for educational purposes it's a lot easier . Sometimes I do and sometimes I don't , just helps keep things in order .
I currently use magic clips, I'm thinking about getting a detachable clipper. Do you have any suggestions? Also how do you like the gamma ergo clippers? Thanks for the response!
Hey ant would u say the ergos are better than the 50 cal? Or are they similar?
They cut similar 👌🏽
@@AntTheBarber is one stronger than the other?
Nice 👍
Ant I like that cut bro!
🙏🏽🙏🏽🙏🏽
Awesome bro
🙏🏽🙏🏽🙏🏽
I stay waiting for these notifications
Appreciate you 👊🏼
Cool
Is the ceramic blade from the whal detailer
It's from Gamma they just put it for sale but I'm sure you could use that one from wahl same blade size
Ant The Barber word thanks always putting out quality brother.
Yo i want my top hair to be the same height as the client in this video as mine is kinda long, is it a 4 on the top to be like that?
No it's finger length
Love the videos 🙌❤️
🙌🏽🙌🏽🙌🏽😉
ayy bro im 13 im tryna get int the barber industry love watching ur vids but i think the machines are expensive and i only have 150 straight up broke any tips my guy much love
-jose
I spent $150 on some legends barber combo on amazon witch are $123 right now on sale. Best clippers i could of started with, good luck. Hmu if you need more info in merchandise and items. I literally spent less then $350 on everything from combs to capes, clippers, shaving gel and more.
Nice bro
🙏🏽🙏🏽🙏🏽
How many more times are you gonna do this vatos hair?
Not everyone jumps to be on RUclips G
Just seeing you trust the process and coming out with quality results. Very inspiring and motivates to keep chasing the passion of cutting. 💯
Chase it , it's worth it 🙏🏽💯
Blurry cut Ant like always still waiting for that low taper tutorial👍
Appreciate that , you messaged me on Instagram right ?
🔥🔥🔥
🙏🏽🙏🏽🙏🏽
@@AntTheBarber wassup bro I text you on Instagram love the work!
Anyone know where Ant is located?
Washington State
Ant The Barber what’s the best way to contact you for an appointment?
👍👍👍
🔥
🙏🏽🙏🏽🙏🏽
Why don't you use the metal combs??
What metal combs ?
My steel tooth combs ?
@@AntTheBarber yes sirr just ordered a few hours ago the 32 versatile pack seen a vid from you
Reupload...?
Yes the 1st time it dropped it only came out in 480p .
💯
Damn bro that’s too blurry 💯💯
🙏🏽🙏🏽🙏🏽💯
🙌🙌🙌💋
Cut is blurry bro 💯
🙏🏽🙏🏽🙏🏽