This approach is correct increasing wire gauge will allow more current to pass through BUT the power bank must be a fast charging type with a port designed for fast charging. If the cable is a standard thinner gauge a fast charging power bank will automatically go to slow charge mode as it senses resistance in power transfer 😉
The true limit is the maxim amperage of the charger itself. Thick cables will only help to a point but more advanced chargers also need the data pins connected as well to monitor battery charge management as well.
So what exactly happened here? Were the data sections removed and only left with power and ground? The phone said 1.5 hours until full charge yes but it never updated to fast charging
You need both the Male USB and Male Type C to have a high wattage rating in order to make this work. Although using thick wires on both power pins are correct because there's more room for current to flow you still need the Data pins to make it a fast charging because todays fast charging adapter/brick does not give all the power to the positive and negative power pins it utilities also the data pins.
@I'm not Beluga I don't see how this is possible, with power exchange the phone and charger talk to each other over data pins, once charger and phone both verify, the charger switches modes and starts sending more than 5v, 9 volt is the next step up, then 12v. With newer quick charge and power exchange models you see 18v all the way to 45 volt, if the data lines are not present, the charger will stay in 5v 2a mode, which will about 4v and 1.6a of power to the phone, which is still regular charging. The only thing the process in this video achieves is removing itself from a data transfer cable which the phone believes it is plugged into a laptop and forces itself to charge at 500ma, or .5 amps, which if your phone charged at all would take 6 hours
WHY does that work? Do the female to female sockets share the same pin out arrangement? I'm wanting to convert a "Battery case" from my old phone into a universal battery backup. It currently has a Male Micro USB Out, so I need to make a flying lead with Female micro USB socket on one end to plug into it, and a standard USB Female type "A" socket on the other end for the output. ...Sound reasonable? The 4000mAh battery (14.8Kwh) output is noted as 5v @ 1.6A max The existing Micro USB female input is fine for charging the case battery, but for general back-up power duties a Female USB "A" Out is more useable for a wider variety of items. Can you advise me?
It works, because high currents going through cheap thin cables creates big power losses, and the phone will limit the current or the cable will overheat and burn out. By using thicker wires, resistance (and power losses) will be smaller, the phone will detect this and charge at the highest current it can take.
@@imnotbeluga007 is this written into software? I have a phone on android 10 that quick charges on my cord, I have another of the exact phones that is on android 11, same charging setup but forces charge at .5 amps thinking its plugged into a laptop
with first cable your phone is saying "charging in 1 hour 26 min" after modification it says "charging in 1 hour 28 min" . so it basically slows down the charging process. i dont understand how it speed up charging
With the high quality Nokia cable, it instantly switched to fast charging, because it had data wires, the phone and the charger use them to enable fast charging. But the cheap crappy cable doesn't have data pins, so it didn't switch to fast charging. By doing this, your phone will charge at the fastest speed possible without being in fast charge mode.
No data line so that the charger and phone can communicate about voltage and amperage capacities? You know that's part of the fast charging standard for most fast charging protocalls right? If this technique didn't work for you, that's likely why. Just say'n.
Pero cuando probó con el cable negro en la pantalla del celular si lo reconoció como carga rápida, y después de fabricar su cable, si redujo el tiempo de carga pero en la pantalla ya no salía las palabras de carga rápida alado del contador de porcentaje entonces ¿A qué se debe que ya no aparezca la palabra de carga rápida alado del contador de porcentaje de carga ?
آیا نوع و جنس سیم اهمیتی دارد منظورم این است که اگر بخواهیم به گوشیم را به لپتاب وصل کنیم آیا انتقال دیتا ها و داده ها بین موبایل و لپتابم ممکن است یا خیر؟
PUT THIS IN TO HEADS GUYS.. HEADS UP! ALWAYS REMEMBER THAT IF YOU SEE VIDEOS SUCH AS EXPERIMENTS AND DIYS FROM INDIANS, DONT YOU DARE BELIEVE AND DO THE SAME THING. MOST OF THEM ARE SCAMMERS. WITH RESPECT TO THE REMAINING GOOD ONES OFCOURSE!
You can not solder data cable if the micro USB connector does not have them, it is only positive and negative. But it will charge fast since the thickness of the cable allows the passage of more mAh
The first high quality Nokia cable HAS data pins, they are used to ENABLE FAST CHARGING. The cheap crappy cable DOESN'T HAVE THEM, so it couldn't switch to FAST CHARGE MODE. It works because THIN CABLES naturally have a HIGHER RESISTANCE. This resistance creates POWER LOSSES and VOLTAGE DROPS, and the phone detects this, and it decides to CHARGE SLOWER, to prevent the cable from OVERHEATING. By using THICKER wires, the phone doesn't need to limit the current, because power losses have been significantly REDUCED, so the phone charges as fast as it can handle without switching to fast charge mode.
How are people thar are clearly not observant at all, so quick to type "YoU GaInEd An ExTrA 2 MiNuTeS" I mean did you even watch the video? If not I encourage you to pay attention to the beginning where the initial charge time was 3hr and 39 min. 🤦♂️
![Digital Circus Episode 4 [TRAILER]](http://i.ytimg.com/vi/abZtsmMUbJo/mqdefault.jpg)
![Hunxho - Ball Forever [Official Video]](http://i.ytimg.com/vi/nki9ZTF9Uls/mqdefault.jpg)
This is a very good way to increase the charging current with thicker wires. Good job !
Yup, increase the wire gauge. Cheap cables come with really thin wire gauges.
I will watch this after 3 years😀
The Nokia cable also has data pins, that's why it quickly switched to fast charging.
This approach is correct increasing wire gauge will allow more current to pass through BUT the power bank must be a fast charging type with a port designed for fast charging. If the cable is a standard thinner gauge a fast charging power bank will automatically go to slow charge mode as it senses resistance in power transfer 😉
Pl write me from where i may call for as, i am disable to move and to get by hand
I don't understand
Fast charger needs cable data support.... Because to transfer battery status to the charger or powerbank.. When done the charge fast...
If current is exceeding capabilities of unit potential to cause fire or damage equipment. This will work but monitor closely
Now wow nice idea 💡
Nice but.....
You may increase the number of wires but again the current passing through the pins will be limited ??
The true limit is the maxim amperage of the charger itself. Thick cables will only help to a point but more advanced chargers also need the data pins connected as well to monitor battery charge management as well.
For fast charging u need to connect D+ D- pins also.
He already did.
@@visionofwellboyofficial no he didn't
So what exactly happened here? Were the data sections removed and only left with power and ground? The phone said 1.5 hours until full charge yes but it never updated to fast charging
It still cut down from 5 hours hello did you not see the time
Mine is 10h😂
micro usb cable price literally only us$ 10cent in my country, and 20cent already got you some quality cable
From "fast charging" 1hr 26m to "charging" 1hr 28m. You made it slower.
Ultra Fast Charging 1h 1m
You need both the Male USB and Male Type C to have a high wattage rating in order to make this work. Although using thick wires on both power pins are correct because there's more room for current to flow you still need the Data pins to make it a fast charging because todays fast charging adapter/brick does not give all the power to the positive and negative power pins it utilities also the data pins.
@I'm not Beluga I don't see how this is possible, with power exchange the phone and charger talk to each other over data pins, once charger and phone both verify, the charger switches modes and starts sending more than 5v, 9 volt is the next step up, then 12v. With newer quick charge and power exchange models you see 18v all the way to 45 volt, if the data lines are not present, the charger will stay in 5v 2a mode, which will about 4v and 1.6a of power to the phone, which is still regular charging. The only thing the process in this video achieves is removing itself from a data transfer cable which the phone believes it is plugged into a laptop and forces itself to charge at 500ma, or .5 amps, which if your phone charged at all would take 6 hours
WHY does that work?
Do the female to female sockets share the same pin out arrangement?
I'm wanting to convert a "Battery case" from my old phone into a universal battery backup.
It currently has a Male Micro USB Out, so I need to make a flying lead with Female micro USB socket on one end to plug into it, and a standard USB Female type "A" socket on the other end for the output. ...Sound reasonable?
The 4000mAh battery (14.8Kwh) output is noted as 5v @ 1.6A max
The existing Micro USB female input is fine for charging the case battery, but for general back-up power duties a Female USB "A" Out is more useable for a wider variety of items.
Can you advise me?
It works, because high currents going through cheap thin cables creates big power losses, and the phone will limit the current or the cable will overheat and burn out.
By using thicker wires, resistance (and power losses) will be smaller, the phone will detect this and charge at the highest current it can take.
@@imnotbeluga007 is this written into software? I have a phone on android 10 that quick charges on my cord, I have another of the exact phones that is on android 11, same charging setup but forces charge at .5 amps thinking its plugged into a laptop
Ask chatgpt
don't invent or experiment with your charger, it's amazing, just buy a 5a/6a usb cable for sure and your cellphone won't break.
Here yes i am wondering how much more charge will be over load?
what type category mm cable you use ..?!
i guess simple audio cable, the higher width the better.
with first cable your phone is saying "charging in 1 hour 26 min" after modification it says "charging in 1 hour 28 min" . so it basically slows down the charging process. i dont understand how it speed up charging
There are two cable in video, you can watch video again, friend
With the high quality Nokia cable, it instantly switched to fast charging, because it had data wires, the phone and the charger use them to enable fast charging.
But the cheap crappy cable doesn't have data pins, so it didn't switch to fast charging.
By doing this, your phone will charge at the fastest speed possible without being in fast charge mode.
@@imnotbeluga007 did the nokia charging cable supports other devices
@@imnotbeluga007 hey beluga do you have any social media exept insta and twitter or reddit
@@imnotbeluga007 do you use telegram?
Fantastic idea and cool content
No data line so that the charger and phone can communicate about voltage and amperage capacities? You know that's part of the fast charging standard for most fast charging protocalls right? If this technique didn't work for you, that's likely why. Just say'n.
Not fast charging write on display
Time down
Because it's not a fast charing support phone
@Hakeem Ullah abi harami ur 😂 phone does not support fast charging bruh 😂😂😂 really man think bro go to Google matha and search about ur phone info
He think that all of us idiots, but obviously to you, you are😅
Pero cuando probó con el cable negro en la pantalla del celular si lo reconoció como carga rápida, y después de fabricar su cable, si redujo el tiempo de carga pero en la pantalla ya no salía las palabras de carga rápida alado del contador de porcentaje entonces ¿A qué se debe que ya no aparezca la palabra de carga rápida alado del contador de porcentaje de carga ?
This also doubles up as a Juice Jack-proof Charging Cable
Great idea
From mr experiment boy ❤️
How to know the speed charging ? one minute charging to full?
Sir wire kitne mm ka le
More current flow in 4mm wire
آیا نوع و جنس سیم اهمیتی دارد منظورم این است که اگر بخواهیم به گوشیم را به لپتاب وصل کنیم آیا انتقال دیتا ها و داده ها بین موبایل و لپتابم ممکن است یا خیر؟
yee pin charging ki kahan say milay gee.
What wire gauge size u use
16 AWG I think
I think 22 AWG
When I do that shit my cables always go wrong with the time.
red positive + black negative -
That seems like regular speed charging at around 1200mAH ...shouldnt Fast charging say fast charging at around 1600 plus mAh ?
What about usb type c?
Im just gonna buy a latest fast charging phone to make life easier
thicker cable, higher resistance, more amps flow, faster charging
Will it cause any effect to mobile???
Thank you.
Happy new year 1400 norooz :)
How i can make that liquid?
PUT THIS IN TO HEADS GUYS.. HEADS UP! ALWAYS REMEMBER THAT IF YOU SEE VIDEOS SUCH AS EXPERIMENTS AND DIYS FROM INDIANS, DONT YOU DARE BELIEVE AND DO THE SAME THING. MOST OF THEM ARE SCAMMERS. WITH RESPECT TO THE REMAINING GOOD ONES OFCOURSE!
Nice video 😮
Does it work?
Wow.. Great job Bro, you did it❤❤❤
Kya Benifit Huya Sir.
Can i ask for the materials needed?
Very good job
Nice 👍🏻👍🏻 🇮🇳 Kuki 15|06|2022
🤩🔥🔥 Awesome
i already done that. The problem with that type of connector if the grip.
Yo no sé si es verdad pero muestra que es carga directa
ami tambien me parece fake, dado que no dice fast charger como con el cable nokia
What is name of thing ,wrap a wire and burn
This fake i am make thats but very medium charging
Great 😺
what r all the wires 4 if all u need to charge it 2 wires😢
Valeu muito obrigado!
A ver si esto funciona para recuperar la carga rápida
Thank you
Good, successfully you are ready to destroy your battery's life
Mine is 10h how do i fix my çable
Ok sudah paham
the black micro usb cord is fast charging while your DIY is not fast charging sino lokohin
USB cable 4 pins fast chargers but 2 pin slow😢
it's 5 pins on *Fast Charging* for the true!
Wire name
That the same thing the first charger where showing u
Thanks bro
👌👍
موسيقى مزعجه جدا
Where is ground? 0_o
do de consigo esas pinzas
fast to charge and fast to explode
Kam nhi hai,,,,,, kya.time to same dikha raha hai
cool
Dp dn
Your GANA break your phone
No mames
Thanks.
This creator needs Need help 🙄😐🙄
After timming is 1 hour 28 mint
It's a *Galaxy S6*
The data must be connected on your cable to enable fast charging,
You can not solder data cable if the micro USB connector does not have them, it is only positive and negative. But it will charge fast since the thickness of the cable allows the passage of more mAh
No changing at all
oh my god!
И чего ты тут показал, телефон ещё дольше заряжаться стал,
lol hahaha is fake video hahahaha
No
No Fast Charging.
thank you.
🥥😍😍😘
How to make ur cable slow first time 1 hr 26 after making fst crgr 1 hr 28 min XD
The first high quality Nokia cable HAS data pins, they are used to ENABLE FAST CHARGING. The cheap crappy cable DOESN'T HAVE THEM, so it couldn't switch to FAST CHARGE MODE.
It works because THIN CABLES naturally have a HIGHER RESISTANCE. This resistance creates POWER LOSSES and VOLTAGE DROPS, and the phone detects this, and it decides to CHARGE SLOWER, to prevent the cable from OVERHEATING.
By using THICKER wires, the phone doesn't need to limit the current, because power losses have been significantly REDUCED, so the phone charges as fast as it can handle without switching to fast charge mode.
Irrelevant video
How are people thar are clearly not observant at all, so quick to type "YoU GaInEd An ExTrA 2 MiNuTeS" I mean did you even watch the video? If not I encourage you to pay attention to the beginning where the initial charge time was 3hr and 39 min. 🤦♂️
fast kaha se huya .. pehle tha 1 h 26 min. ab show kar raha he 1h 28 min. kohi bhi try math kar na
0:14 friend :D
1h26min
To
1h28min
Nice you will wait two minutes more to change your phone
It is 3h39min to 1h28min, friend
It's *Galaxy S6*
@@CreativeAndDuck You phone is Galaxy S6
Sir wire kitne mm ka le