Это видео недоступно.
Сожалеем об этом.
Restoration of Hyundai Excavator Main Hydraulic Pump | Amazing Skills of Small Mechanic
HTML-код
- Опубликовано: 1 фев 2022
- Restoration of Hyundai Excavator Main Hydraulic Pump | Amazing Skills of Small Mechanic
#Hyundaiexcvator
#kawasakiexcavator
#hydraulicpump
Hydraulic pumps are put together with extremely high tolerances in clean environments so no foreign dirt can get in.
These guys take it apart and put it back together with a hammer and a screw driver.
While laying in mud.
Not sure what the one guy was doing inspecting these pieces. Does he even know what he’s looking for?
This pump is definitely going fail completely from all the dirt that they put inside the internals.
Looks like it still leaked in the end especially when I’d didn’t look like it leaked in the beginning.
You'd be surprised, but they last. They wash them all with fresh gasoline, that's more than enough to dissolve and wash away all the contaminants. Is it optimal? No. But it will last a few more years of use, and that's all that matters.
Yeah he knows what he's looking for, he's just checking if if had enough dirt to make it all wear in properly 🥴
Что отремонтировали заменили так и непонятно, заработал ли при этом экскаватор так же неясно, в общем сняли отмыли, пересобрали и в путь, на пару дней.
Ремонт это просто помыть? А что так можно было? 😆
Где то тут было видос, про ремонт ТНВД, там принцип такой же был )
Уже сам процесс разборки вызывает большие сомнения в качестве дальнейшего ремонта.
cool
Просто жесть какая
А сборка молотком вообще супер))
Разобрали, типа помыли с песком. И собрали... Кудесники епт)
Видите, как нас в сервисах разводят, типа надо расходники менять, заменять изношенные детали, когда можно было просто помыть и все.
Apart from the pump being dismantled, cleaned and re-assembled, nothing new has been replaced, not even an o- ring. So what was the problem with it?
Just wash :) very dirty. I wrote some message but at Russian
I was thinking totally the same
There where not enough dirt particles inside so they put some in now performance is raised
I would of put some loctite on probably all the nuts and bolts
Not to be precise but .. yes they did replace one o-ring .. just sayin
А разбирали зачем? Ни одной детали не поменяли (кроме уплотнений), даже НШ не проверили. Все как было изношено, так и собрали. Чисто помыть? Или на сдают нормы на мытьё на время :)
amazing
Помыли в грязной жижи
Да ладно!
13-20 шлифовка за кадром точно была...
И да, в процессе сборки подшлифовывали с грязью.
@@vladislavkucherenko3788 плунжера видели как запали в Цилиндры? Там выработка по 1 мм не меньше)))
это был обучающий процесс рядом пацан сидел и наблюдал спецы ему показывали а потом доверили мойку в волшебной жидкости
No torque wrenches were harmed in the making of this video.
Proper torque was obtained using a "knockometer".
They don't need a torque wrench, they have plenty of workers of different weight to pull on various lever lenght. That's why there are children around, just for the small bolts and the big guys take care of the big ones! Clever... no ??...
Don't need no torque wrench, just tighten it until it strips and back a 1/4 turn
I watched the whole video. I’m still waiting for the “Amazing Skills”.
Всегда обожал "специалистов " что работают на полу !
Особенно в песке и с гидравликой🥺
все в грязи, разобрали, поменяли резинки, намазали маслом, собрали... а ремонт где? everything is dirty, disassembled, changed rubber bands, smeared with oil, collected... and where is the repair?
Tengo la certeza de que esa bomba ya la habían reparado, de ahí el color de los basculantes no pintados de rojo. Puede que hiciera relativamente poco de esa reparación y por algún mal funcionamiento la hayan desmontado, revisado y vuelto a montar. La limpieza si es algo que deberían cuidar y si quieren piezas nuevas que me llamen ;)
@@zonds Заебись! Круто!
Dirt is death to hydraulics. No excuse, just poor training. They didn't seem to care. Grime everywhere.
I bet the guys who built it at Hyundai would cry if they saw this
Not really. Destroying equipment is good for new equipment sales!
Take it apart, roll it around in the mud and then put back together. All you need is a couple of old pallets nailed together, and you can elevate you work station 6 inches out of the mud. Cleaning stuff then standing it back on the ground, there must be a plank of wood about.
That needs intelligence that is lacking here :-) did you see any new part that would justify the work? Nope
Ну что начинаешь то.
Так глядишь прислушаются к тебе и начнут не только мыть но и новые запчасти ставить😁😁😁
Exactly what I was thinking...have these people never heard of a "work table"!!!!
Pakistan is on the lower end of IQ ranking countries…monkey see monkey do. Not me, we are #7 on the rank.
Lavou tá novo,Pra que gastar com peças novas então .
Good brother😘
Special appearance; a work bench!
Я уже не говорю о пневматическом или электроинструменте, но у ни даже нет бит и насадок с трещетками. Они все крутят рожковыми ключами и шестигранниками....
Дай им в руки нормальный инструмент, вы представляете, что они могли бы наделать? )
@@vikingmihinlank969))))
Класс, теперь но остался единственный вопрос, зачем ?
зачем они его разбирали если новых деталей не ставили ))
oring değiştirdiler.
@@dexter2183 так они ставили старые на видео кольца
просто интересно что в нутри
Suggestion Cut some of the large rags into 35cm-by-35cm pieces. You will make them more usable and use fewer rags.
Good ❤❤❤❤❤❤❤❤❤
better than a Ritchie brothers 5 gallon overhaul
PARABENS POR ESTAREM DANDO AO JOVEM A OPORTUNIDADE EM CONHECER A DESMONTAGEM E MONTAGEM DE UMA BOMBA HIDRAULICA MUITO COMPLEXA, PREPARANDO- O PARA UM FUTURO PROMISSOR E VITORIOSO , COISA QUE SE VÊ EM POUQUISSÍMOS PAISES.. PARABENS TAMBÉM AO JOVEM PELO ZELO E RESPEITO COM A MISSÃO RECEBIDA..
How in the hell do these guys remember how to put this back together from memory..................................
Because they do it every week or so. On the same pump. One day they might get it to work.
MR BEAN VERSION ON HOW TO NOT REPAIR A PUMP..🤣
1:27 first start of a fresh rebuilt engine
для факеров педцентавра,там ваши.
All lines removed need to be caped to prevent contamination. We’re is the elephant.
How to get the dirt from the outside to the inside?...must have great backs and leg muscles,I am jealous...very interesting seeing it apart
Republic of Uzbekistan. 👍👍
В начале думал не соберут а нет
Half of the allen bolts are F****ed up in the process...good job
good job, we have hydraulic pumps and parts
friend welcome very nice video .
A cheata-bar makes a great torque wrench
무엇을 수리하는 영상입니까? 고장내고있는건가요? 청소를 하고있는건가요?
@10:00 Look, an actual workbench.
*Which US city is this?*
Nice air compressor.
Awesome work
so not one air tool was used and that one red allen bolt didn't get tighen and glad there was a new bearing, but and why wasn't the bolts cleaned and or it sandblasted or repainted and the service wasn't milled or smooth or that yellow wheel didn't get cleaned or replace the rollers that were worn or show if it even worked when it got back in :\
Love how it was disassembled before cleaning. But I do this type work daily and could not imagine wearing a skirt or sandals, so I guess I admire them for that.
You should try working in a skirt, its very liberating, but make sure you have panties on, you wouldn't want the chaps in the workshop seeing your bits when you bend over
But for me it is a renovation to be cleaned and new sealants, and where the replacement of pistons and valves will not work properly anyway
For me also , only new seal and gaskets
They don’t even have slings ffs? No spare machine in the yard to save your back
I have to get me one of those magic hammer they have!j
Вы не сможете этого сделать!
Эти волшебные молотки и тряпки с грязной водой имеют магию только в их ареале обитания.
Не тратьте зря время - пользуйтесь своим наборами инструментов и завидуйте этим самоуверенным мужчинам!
They leave the dirt on as an oil absorbent...much better then washing and its free.
If they wear their pyjamas to work, what do they wear to sleep?
Bhahahahaha.
Same clothes. All day every day.
God created pressure washers for a reason.
CSA approved sandals
I love seeing that young boy working hard and so intent on doing it correctly!
Joe Biden is that you?
Pump housing me se roker pistion to nhi nikale, kaise nikalta hai please btao
Well yeah why not.. this unit may cost around 4000 dollars which probably is the monthly salary of all people shown in this video.
باكستاني تسليكه😂 كلووو معلوووم
إيش الإنجاز اللي عمله تنظيف ومطرقه
ياخساره الوقت اللي طالعت الفيديو فيه.
все понимаю, но не понимаю зачем на корточках трахаться? Стол железный не великая проблема же
У них так принято.Все на земле
Специалисты нулевого уровня и должны работать на таком уровне.
Уже потом, после десятка лет такой работы им доверяют более сложные задачи - уже на столе.
Это следующий и высший технологический уровень в их условиях выживания...
Newton meters = trust me bro
Uhhhhhhh, looks to me like a lot of DIRT is going into the reassembly 😮.Not good
Hay quá
I wonder if they ever have to go back and look at the video to put something back together properly.
OK 👍👍
If all the dirt wasn't bad enough, someone decides to fire up the grinder right next to where the pump was being assembled 🤦♂️
Need to clean the place up how anyone could work in that shit
These pumps are so difficult to rebuild properly. Tolerances are very important or it will not perform. Installation of the seals exactly correct is mandatory. In the US the money for this rebuild would be $4-5 thousand. A total rip off. I’ve seen these being rebuilt in less than 4 hours.
Hydraulic mechanic's resume: I can squat the entire day, have open-toe sandals, loose-fitting clothing, a young son not going to school that can help, and a hammer to pound with the best of them.
What is this working conditions
Смазали маслом то, что изначально было в масле, собрали и заебись ремонт!
Ωραίοι τεχνίτες αλλά πάσχουν από εργαλεία όπως πάγκος εργασίας πλυντήριο εξαρτημάτων πάντως καλοί είναι.....
Explication en français
Steel toed sandals ? Come on man.
Hi 👋👋👋👋👋👋👋
They tore it apart but does it work ????????????????//
Mis respetos para ESTA Gente con poka herramienta asiendo buen trabajo
Guys need to get official work tables !!!
I can do Bangladeshi hydraulic side work I can be employed
Piolet pump kiderena
Young boy, work hard too👍👍
Good video ☕☕
I suppose you gotta do what you gotta do ,with the limited infrastructure. BUT... If I had done this, I would end up having to buy the owner a new machine out of my pocket on these practices... just saying...
hi
naftaremont aga mitte restaureerimine...
Benches were created for a reason .
REMEMBER: Always remove the dirt on the casing BEFORE disassembling the unit ! !
Ale mi to remont aby umyły i uszczelniacze nowe a gdzie wymiana tłoczków i zaworów nic im to nie da głupiego robota
These guys are awesome
А может скажет кто господам Индусам. что на свете есть верстак с тисками . И очень интересно - кто , за что отвечает ? Кто главный?
Warranty. Until is leaves the lot. To many hammers.
lifestyle in Kanakistan
K5V63
HHAHAHAHAHA..what ate u doing??? Like seriously???
Abonnement en français
Imagine a Hyundai technical representative viewing this video. Slaps forehead and groans いったい何なんだ! (freely translated "What the fuck!)
Bhai aap ka aadres kya he
Всё самое интересное за кадром, на видео только мойка и мойка
Genious
K3V63
Did it work properly? Video cut short...
Ugh..what a mess🤦♂️
What a bad job. Incredible the dirt of the place. The men work squatting or sitting on the floor ... Mecanics repair engines and equipment by throwing the parts on the dirty floor, there's garbage everywhere ... Mechanics don't wear protective gear. Impressive the dirtiness of the place…
Cut out the sweet talk
These are the hands that get things done!
Гениально- сначала разобрать, а потом грязь счищать. Сразу же нельзя было, иначе это говно бы внутрь не смогло попасть
JAWA @27:29