i learned things like this in school over 45 years ago. I appreciate you showing these techniques, but as a young machinist, I learned these things long ago, in school. Thank you.
Eu já vi cara inteligente inclusive eu mas você é incrível quanta capacidade de criação no torno é caro que também consigo mas só porque vejo os vídeos . E pego as ideias prontas muita coisa eu nem imaginava pensar . Mas vendo como se faz . Daí é pegar as ideias parabéns ainda não tinha visto tanta inspiração. Obrigado.
Buen trabajos , pero no es necesario marcar el plato , solo es dividir el paso por la cantidad de entradas del hilo y desplazar con el charriot , saludos desde chile
We in the UK dont do any of this at school and in 10 years there will be nobody to do the job , I have been after a machinist for 2-3 years now and cant get anyone who can do it so my workforce at the minute consists of 1 x 65 year old, 1 x 62 year old and me at 48 years old and a welder thats ready for retiring, nobody wants to get there hands dirty any more
I would like to see you take a block and bore a 2 degrees MT3 internal taper into it and weld a 1" X 1/2" X 4" bar to it to fit the tool post ! Then you can fit anything with a taper into the tool post !
Vidio ini adalah kesimpulan akhir dari sekian vidionya Mas Yanto di Bengkel tempat kerjanya.... Alunan musik Back soundnya pas sma perpisan dngn temn2 di bengkel tempat kerja😁 Semoga usaha bengkl bubutnya lancar orderan... bengkel tempt kerja juga lancr jaya
man's workmanship is very nice.. did you notice what he did?. pcp trigger valve and tube..but really good job with a rough lathe.. it's called "mastery"
Пожалуйста, не надо такому обучать . Для этого существует фрезерный станок и делительная головка . А все эти "лайфхаки" это нарушение нормальной технологии и ТБ.
Another thing they don't 'teached' in school is how to be brutal and bend the chuck key with an extension tube or leave loose items lying on the bed ways when running the machine......there's a load of unsafe practices here they thankfully don't teach in any credible training school.
"TEACHED" IS NOT A WORD, PLUS IMPROPER PRONOUN AS USED, SO MAYBE ENGLISH NEEDS TO BE TAUGHT AND NOT MACHINE SHOP PRACTICES? ALSO NOTE P4RT9? WHAT THE HELL IS THIS?
Mantab pak 👍👍👍
I wasn't a good english student but I do think it should be taught in school!!!!!
to english only !
often the tricks and tips born out of necessity are the best
Nice overview. Thank you, Yanto. 💪
Frank 🙋♂️🇩🇪
Thanks brother Frank ♥️😍
Keren host cara krj nya
very nice. thanks.
👏👏👏👍. Leonardi do Brasil
I look forward to your videos, like being in school. It's amazing you are so young and so skilled. Thank You
Thanks brother Charles ❤️❤️🤝
بارك الله فيك
Aamiin ♥️
Your a great machinist, keep up the great work..
Thanks brother Kentucky ❤️❤️❤️
tailstock out means centre drill out, lesson 1.
Mantap mas sukses selalu 👍🙏
Maturnuwun pak.. salam satu pahat dari Jateng
Nice video, thanks :)
Très ingénieux bravo et merci. GERRY G. du canada
Gday, amazing job mate
Thanks brothers Matty's workshop
I like your video..
i learned things like this in school over 45 years ago. I appreciate you showing these techniques, but as a young machinist, I learned these things long ago, in school.
Thank you.
So if you learned all those things in school, please tell me what is he assembling at 26:46 ...
Necessity is the mother of invention 👍
Thanks brother Bill
Here on planet earth we use a BRIDGEPORT and a side cutter. But this dude must be in MAD MAX LAND
Bravo Messin muy bueno, Abrazo para ti y todos los hermanos Indoneses.
Jese Maciel Zamudio i ♥️ u
@@Yantoo ❤
You mean Not "Taught" at School !
😂😂😂😂😂😂
Video yang luar biasa dari kelima metode ini. Terima kasih saudaraku Yanto untuk ringkasan video ini 🙏👍
Salam dari Jawa untuk saudara di Prancis.. di konten berikutnya saya akan memakai mesin bubut sendiri.. 😁
@@Yantoo Selamat saudaraku Yanto. Saya mengirimi Anda dari Prancis harapan terbaik saya untuk sukses 😁
Orang mana mas mekanik mesin
@@tedyprabowo642 Mas dan teman saya Yanto. "Mekanik Mesin" adalah saluran RUclips miliknya.
Μπράβο!!! ωραίες πατέντες και έξυπνες κατασκευές, και πάλι Μπράβο!!!
Terimakasih saudaraku ♥️😍
TEACHED..............................Taught
Wes...angel2..🙇♂️
Да любопытно ,спасибо !!! ☝️👌🤘👍🖐️🙏🔥🌿💻📖✍️🤔
🤝🤝🤝😍😘
👍👍👍👍👍💕
Отличная приставка для фрезерования
thx
Como se llama la herramienta con que sujeta la fresa y colocas en el torno por favor
Не надо делать из токарного станка фрезерный. Фрезерный станок лучше подходит для таких операций.
Fantástico!
Eu já vi cara inteligente inclusive eu mas você é incrível quanta capacidade de criação no torno é caro que também consigo mas só porque vejo os vídeos . E pego as ideias prontas muita coisa eu nem imaginava pensar . Mas vendo como se faz . Daí é pegar as ideias parabéns ainda não tinha visto tanta inspiração. Obrigado.
Semangat om
Maturnuwun pak bos 😁♥️
13:25 шарик на рукоять легко точится без этих мудрёных приблуд и делать его надо стальным, а не из бронзы.
Those who actually went to school might say, those were not TAUGHT where they went as well. Nope...and neither was English.
and you dont need everything anglisized to be a metalworking genius
👍👋
Buen trabajos , pero no es necesario marcar el plato , solo es dividir el paso por la cantidad de entradas del hilo y desplazar con el charriot , saludos desde chile
We in the UK dont do any of this at school and in 10 years there will be nobody to do the job , I have been after a machinist for 2-3 years now and cant get anyone who can do it so my workforce at the minute consists of 1 x 65 year old, 1 x 62 year old and me at 48 years old and a welder thats ready for retiring, nobody wants to get there hands dirty any more
... or learn to write correct English.
Brawo dzięki za film życzę dużo zdrowia
😍🤝🤝
what is the use of what was assembled at the end?
ESTE CARA É UM GENIO
Who wrote the title for this? Did they have an English class at his school?
👌👌👍👍
Franco 🤝
@@Yantoo merci bonne journée @+++
You are a master with the lathe without a doubt, thanks for letting us see a bit of what you can do my friend 🏆
Melodija is dream come true ☆☆
Thanks brother.. planet zooom ☝️🤝
Nice jnb from Pakistan
Assalamualaikum 🇮🇩❤️ Pakistan
Walikum slam
I would like to see you take a block and bore a 2 degrees MT3 internal taper into it and weld a 1" X 1/2" X 4" bar to it to fit the tool post ! Then you can fit anything with a taper into the tool post !
Semangat terus Pak Yanto.. jangan lupa rokok Samsu nya..
Terimakasih juga untuk martabaknya 😁😁
@@Yantoo di tinggal pulang pula 🤦🤦
дайк
Lanckerekkel marni!!!???
Vidio ini adalah kesimpulan akhir dari sekian vidionya Mas Yanto di Bengkel tempat kerjanya....
Alunan musik Back soundnya pas sma perpisan dngn temn2 di bengkel tempat kerja😁
Semoga usaha bengkl bubutnya lancar orderan... bengkel tempt kerja juga lancr jaya
Alamat Bengkl barunya??? Mas.
Benar mas.. 12 tahun saya bersama mereka..sedih tapi ini bukan perpisahan..
Saya buka bengkel di deda Banyuurip Purworejo mas..
Część super praca Jan P
🙂
Teached ?
But what does it do?
Emglich werent teeched neether two as well .
man's workmanship is very nice.. did you notice what he did?.
pcp trigger valve and tube..but really good job with a rough lathe..
it's called "mastery"
👍👍👍
Пожалуйста, не надо такому обучать . Для этого существует фрезерный станок и делительная головка . А все эти "лайфхаки" это нарушение нормальной технологии и ТБ.
"not TAUGHT at".
Все собирается на полу верстаков нет воопще
Ему пожалуй доступно будет выточить высокоточную ракету.
ฉันชอบดูงานกลึงของคุณมากมันชั่งน่าทึ่งมากคุณคือช่างกลึงมือโปรเยี่ยมไปเลย
♥️🤝🤝🤝
Ну и что тут необычного?
А теперь сделать 1000 шт. за норму 0.15...
может просто фрезер купить автору а не курить что попало ?
Torkarka to najbardziej uniwersalna maszyna
Możliwości zależą od osoby
The silly music hides anything we could learn from the machining sounds.
я не пойму, это звезда от мопеда? А как она режет?
Колхозно. Но у этого колхозника все норм.
Я тоже удивился))) А потом увидел - он к одному зубу пластинку приварил!
Откуда этот чудо-токарь?
I was TAUGHT not TEACHED
Taught not teached.
Alamat bengkel bubutnya pundi???
Kulo ponorogo, kapan kapan mau kesitu
Jasatec gamping
@@bkonjac7708 alamat lengkapnya??
Cari di maps saja, jasatec jogja
Apparently correct grammar not teached either.
что за приблуду в конце он собрал???
The music i horrible.
No - Tltle should read: "Five Lathe Techniques That Are Not TAUGHT At School P4RT9" ( Are any of the "Proof - Readers" competent these days ?)
индус колхозник какой то.
taught, not teached. Go back to school.
Another thing they don't 'teached' in school is how to be brutal and bend the chuck key with an extension tube or leave loose items lying on the bed ways when running the machine......there's a load of unsafe practices here they thankfully don't teach in any credible training school.
"TEACHED" IS NOT A WORD, PLUS IMPROPER PRONOUN AS USED, SO MAYBE ENGLISH NEEDS TO BE TAUGHT AND NOT MACHINE SHOP PRACTICES? ALSO NOTE P4RT9? WHAT THE HELL IS THIS?
I have to say I would never have thought of doing that