Thanks for sharing the video. That 7600 has had the dash assembly replaced. They were made a little bit different when they were made. That's like the later series had. We had one on the farm it was 85 horsepower the radiator was not quite big enough if were pulling it hard it would try to run hot on you. The 656 diesel I had would out pull it and a buddy of mine had one of each also and said that the 656 would out pull his too. It would make a good hay tractor. Take care.
Regular cab pickup with shift on the floor 4x4 it’s a true gentleman farmers equipment 😅 it looked like some more nice maintained equipment! Good luck on bringing something home!
Excellent video Gino :) I say New Holland tractor go up for $25.000 to $45.000 and one think $15.000 tops agree there ! Lots great conditions equipment!
You should make a video of where to buy an aftermarket 3 point hitch kit for a Farmall M that never came with 3 point. I see my brother installed an aftermarket 3 point hitch kit on his 756 IH tractor, but I have no idea where he bought it.
UPDATE: I just talked to my brother. He said he pulled it off of a different tractor, when he was buying a loader and the guy threw in the 3 point hitch, if my brother pulled it off.
Another great preview 👌 these 7600 over here are a much sought after tractor 💪 we had them an after warranty was up they got a tweak an were pushing 106 hp at the shaft 💪💪 the 5230 looked very similar to what we had over here but that range were badged as 5130 5140 5150 etc with Cummins engine in them 💪👌 Red Power 💥
The Pequea tedder probably came from Stiners in Mill Village. Someone will probably get a deal on that. When i bought mine several years ago it was almost $9k.
Ford 7600 is one of the toughest tractors for its time. It ranks right up there with the MF 399. The little Ford 4000 is right around 52hp at the PTO. I brought one at auction for $2800 about 7 years ago and its been good, just more horsepower than i need.
I didn't see a whole lot of stuff I would want other than the drill or planter . I'm not much of a Ford guy but I would have one if I got a steal on it . Thanks for sharing and have a great evening !
Lx665 New Holland was the first skid steer I learned to operate. Good times lol...then I got spoiled when we went to Case and the H pattern hand controls 😂
Never had an issue with New Holland equipment! Always enjoyed using it without issues! Like them Ford tractors had a 9600 and leased a TW-25 the Massey did the heavy work! Farmalls did wagon pulling and cultivating! Cool video boss
I know the reason green guys are jealous of red and blue because red and blue pull better than green, and they don't blow turbocharger like green does that is why green are jealous I'm big red and a blue fan
Lets clear up the "greenies" thing. Oliver guys are not the same as the greenies youre talkin about. Lol. I do enjoy your channel. We are an Oliver farm here in NC. The finest in farm machinery
Nice looking bunch of equipment. Looking forward to what it brings.
Its blue its blue💪🏼❤
Hello Gino looks like some good equipment there. Have a good day.
That 7600 looks really nice. I think you're right. It should bring a good price. Have a great weekend FF! See ya!
Thx for the footage FF, pretty good little lot of equipment. Just keep duckin and movin to dodge those green jabs that are thrown your way 🤣😂🤣BOOM💥🇺🇸💥
Thanks for sharing the video. That 7600 has had the dash assembly replaced. They were made a little bit different when they were made. That's like the later series had. We had one on the farm it was 85 horsepower the radiator was not quite big enough if were pulling it hard it would try to run hot on you. The 656 diesel I had would out pull it and a buddy of mine had one of each also and said that the 656 would out pull his too. It would make a good hay tractor. Take care.
Regular cab pickup with shift on the floor 4x4 it’s a true gentleman farmers equipment 😅 it looked like some more nice maintained equipment! Good luck on bringing something home!
Thanks for sharing! Looks like it was going to be a good auction my friend!
Love my Ford tractors. Ford Farming as the old N Series ads used to say.
Excellent video Gino :) I say New Holland tractor go up for $25.000 to $45.000 and one think $15.000 tops agree there ! Lots great conditions equipment!
Interesting preview. Nice Ram truck!
You should make a video of where to buy an aftermarket 3 point hitch kit for a Farmall M that never came with 3 point. I see my brother installed an aftermarket 3 point hitch kit on his 756 IH tractor, but I have no idea where he bought it.
UPDATE: I just talked to my brother. He said he pulled it off of a different tractor, when he was buying a loader and the guy threw in the 3 point hitch, if my brother pulled it off.
There is a site or a company that does sell them
Mint New Holland!!
Sharp 7600 Ford!!
Another great preview 👌 these 7600 over here are a much sought after tractor 💪 we had them an after warranty was up they got a tweak an were pushing 106 hp at the shaft 💪💪 the 5230 looked very similar to what we had over here but that range were badged as 5130 5140 5150 etc with Cummins engine in them 💪👌 Red Power 💥
That's a lot of ponies at the shaft
And it showed with the smoke from the exhausts 🙄 no smoke no poke 💪💪😁
If that hours gauge is correct on that 7600 that would be a very nice buy
A few oranges too. Although, I’m also running a 59, 560D Turbo.
I really like that7600, that's on the dream tractor list
Nice 5230 Case IH....
The Pequea tedder probably came from Stiners in Mill Village.
Someone will probably get a deal on that. When i bought mine several years ago it was almost $9k.
Wow
Full line of equipment....
Decent JD 350 Crawler ..
The 4000 ford is an SU model. They had a 3000 front end and everything else was 4000.
I was told the reason that tractor was created was people needed shorter 50hp tractors, and the ford 3000 wasn’t powerful enough at 40hp.
Decent 4000 Ford..
Bucket Kirby Puckett 😂 had me rolling one of my all time favorite Twins ! 🇺🇸
I was wondering how long it would take people to figure that one out lol
That series Ford were some tough tractors. Growing up we had a 7700 and and 4600, both were very good.
It was refreshing to hear your honest opinion on the Ford 7600. I own a 7710 and a 4000 similar to that one and I'd be lost without them.
7710 is legit
Ford 7600 is one of the toughest tractors for its time. It ranks right up there with the MF 399. The little Ford 4000 is right around 52hp at the PTO. I brought one at auction for $2800 about 7 years ago and its been good, just more horsepower than i need.
You looked good on the Ford 7600
If that Ford 7600 goes for 5000 would you buy evening if you didn't won't to use it you can flip it and double your money
I'll buy it if it goes for 6000.
If it's blue it's for me! Boom 💥
I didn't see a whole lot of stuff I would want other than the drill or planter . I'm not much of a Ford guy but I would have one if I got a steal on it . Thanks for sharing and have a great evening !
It's funny you and I are interested in the same thing
C'mon G you know you want a Ford. Go ahead and buy it try it out and when you don't need it anymore sell it Quit torturing yourself.
He would be the Ford Fanatic in no time.. lol
Hey I film with my phone too
Lx665 New Holland was the first skid steer I learned to operate. Good times lol...then I got spoiled when we went to Case and the H pattern hand controls 😂
Found
On
Reading
Dump
Lol
My opinion is if international would have built the 7000 planter it probably would not have sold very well
Oh yeah people pay for the name alone
@@FarmallFanatic lol it pays the better 🤣
Never had an issue with New Holland equipment! Always enjoyed using it without issues! Like them Ford tractors had a 9600 and leased a TW-25 the Massey did the heavy work! Farmalls did wagon pulling and cultivating! Cool video boss
Sharp lo mileage Ram Pickup!!
For that disc u need 110 hp tractor and u need middle hp is 165 hp we have that model of discs
I figure he pulled it with the new holland
Anybody know what it sold for? Is there a video forthcoming?
Tomorrow
@FarmallFanatic thank you!! I am working nights, had to miss this one.
That’s odd bortnicks used to be a Oliver dealer and now it’s a NH dealer
I need a ford 901 diesel
Ford power all the way
Yes
👍🏽
Damn, I don't have a 4000 or a 7600... spent many hours on my dad's 4000, never touched a 7600, but I'd like to!
I know the reason green guys are jealous of red and blue because red and blue pull better than green, and they don't blow turbocharger like green does that is why green are jealous I'm big red and a blue fan
Lets clear up the "greenies" thing. Oliver guys are not the same as the greenies youre talkin about. Lol. I do enjoy your channel. We are an Oliver farm here in NC. The finest in farm machinery
By greenies I hope you mean Oliver guys the only true greenie
No the Oliver guys aren't disrespectful
@@FarmallFanatic that’s what I mean we are the only true greenie
It's a Hey rover😊
It was $13k new in 1980, I'd say it's still worth that now.
Absolutely
The 7600 looks solid. I would say $9K low and $12K high.
I am right there with you on those prices
All of that equipment looked to be shed kept and taken care of. Very nice 7600
I've seen Ford Tractors do rather well at the pulls...
If I remember correctly Fords got 2nd place in both the Light and Heavy Hot Farm classes at the pull in Deruyter NY last month...
If they are rebuilt correctly they will win
What town is this auction? My tablet cuts the sound on your intro. Appreciate it. Bill
Guys Mills
thanks, Bill@@FarmallFanatic
Nice 7600 ford should be turbocharged
That’s the wrong tach for that tractor.
Lesgo Brandon Lesgo Brandon (let grow)
Is no joke Boak going to buy the 12' drill ?
Ahahahahahahaha 🤣 I don't know I doubt he'll be there
13500 for the 7600
.... nothing for the "punkin heads"....
No the pumpkin heads have to suffer this round
It’s cat 2 but not Hong Kong foo so it must not be that good 😂
Ahahahahahahaha 🤣