Видео

That’s where you’re wrong bud. I added hand loads because it’s another data point. I guarantee my hand loads are more consistently loaded than anything out of a factory. They have the exact same amount of powder, down to the tenth of a grain. They are sized, prepped, and seated to the same specifications. This is a comparison of barrel lengths to velocity numbers in the ar platform. How does having another data/comparison point not tell you anything?

I’ve not had that issue, I hate that happened to you. Have you checked the owners manual? Have you reached out to Pro Ears? That’s where I would start.

That’s awesome! I would love to see this cartridge make a revival in the market

I borrowed a d60 and the spring was coiled wrong inside of it, then my rifle didn’t feed the next round after I cleared the first stoppage

20 inch would be fine but you’ll lose a significant amount of velocity

Yes there is!

@@TNRay thanks very helpful

@@chrisb3873 you bet!

I don’t have enough time shooting mine to really provide good feedback. I think that’s the case for most people currently

I love that can, I certainly prefer it over the sandman S I had on the same rifle.

Still the best ear pro I’ve ever used! I use them all the time at the range, and I use them at the gym as headphones too. I prefer these over the stealth elite, which I reviewed as well.

Yeah probably, clean bore and cold bore could both be the culprit.

Great little lights for a great little pistol!

Thanks for the comment! B&T makes some fantastic options. I do agree, ambi controls is a plus. The main benefit the mpx has over the apc9 in my opinion is the operating system. Gas piston tames the recoil vs direct blowback, even with the hydraulic buffer.

My apologies, I must’ve misspoken. Or overlooked the 25+ models listed on their website 🤣

Awesome! Yeah I would love to see more options for different firearms

Yes, I recommend selecting the rubber spacer based off the offset you need with your specific holster. I used the safariland nuts because they have the three tabs that allow them to sit flush inside the qls plate.

@@TNRay Did you notice the 3 tabs scratching the metal surface of the plate ? Which side do you put the rubber spacers on ?

@nicholasclarence I put the spacers between the plate and the MHA

Thanks Louis! One of these days I hope to be as cool as you

Thank you!

.92”/Low

That’s a great deal

They’re great triggers at a great price point

It’s just 22LR

🙏🏼

@@TNRay dat slide is beautiful I keep saying it’s looks aggressive

@kingkiddwavy5668 yeah it does. The new carry comp is slick too

Awesome!

?

Did you have better or worse groups?

@@TNRay way worse, I posted a video

@Grumpyseabee22 sorry to hear that!

It was trying to, had some flyers every couple groups and the velocities weren’t great…

That’s a heck of a deal!

799?

The USP lineup certainly has some phenomenal pistols. Seems like you’re very familiar with them.

@@TNRay My USP45 Compact was on of the first 50 compacts to come into the USA in 1998 and I have been carrying on and off since then. I was issued a USP9 full size as my duty weapon by command while I served in a Security Squadron in the US Navy after Sept 11, 2001. The command purchased the pistol since we were a new command and basically needed everything and our CO was wanted us to have the Very Best Gear so he ordered Supply to contact the HK MIL/LEO Rep and we got brand new USP9 pistols I would have gone preferred 40sw or 45acp but those USP9 very nice.

The DWX is a better price point by almost a grand, and now that they offer it with an optic ready model… it’s all user preference for grip angle and the ability to customize the pistol.

Thanks Donny! I haven’t shot the Sig Legion in quite some time now, but I would say they’re probably fairly similar, with the walther taking a slight advantage. Especially with the trigger, and if you make the zr tactical upgrade, the walther probably squeaks it out a little. That said, Sig just released the SXG too, and I’m curious to see how it shoots.

@@TNRay would you expect one to be more reliable over the other?

@DonnyCorona-f7t some will automatically say the Sig is unreliable or unsafe. Never had issues with mine, but the Walther is 100% in my experience with it, of each model of the pdp I have fired with zero malfunctions.

@TNRay thanks for the info. The PDP seems to be getting a lot of good recognition lately. Sometimes its hard to tell if it's legitimate or not, with so many people being paid for "their" opinions online.

@DonnyCorona-f7t yeah I agree, it’s been getting a lot of positive attention. And there’s always gonna be some people playing everything up to look good for the companies… you won’t find that on this channel, it’s all honest

Solid reticle option!

Yeah no doubt! It hits above its weight class in performance

Yeah you’re not wrong

Thanks for the info!

That’s not a dumb question at all. I actually prefer hunting with either a brake or a suppressor, but I can’t speak for everyone else. I know some complain about how loud brakes are, and a majority of hunters don’t like to hunt with hearing protection. That is the only legitimate reason I have ever heard of hunters not wanting to use them.

That’s not a dumb question at all. I actually prefer hunting with either a brake or a suppressor, but I can’t speak for everyone else. I know some complain about how loud brakes are, and a majority of hunters don’t like to hunt with hearing protection. That is the only legitimate reason I have ever heard of hunters not wanting to use them.

See… that’s a problem in my mind

@@TNRay you are correct, I have 2 kimber classic stainless in 45. I have LOTS of rounds through them in IDPA matches with no issues ( unless I screwed up) but I can take those same guns to the range and use their mags and I will start seeing the same malfunctioning you experienced.

@williambarnette1049 nice! Just blows my mind that a company would ship out a gun that knowingly doesn’t function out of the box.

@@TNRay I know a gentleman who shoots for Kimber ( or shot) and he says that it’s all a trade off, higher end mag somewhere something is sacrificed.

@@williambarnette1049 oh no… I’d pay $50 more for a gun that comes with mags that run lol

Ahh man! Hopefully you get it worked out.

Yep, all good here! Just making a quick joke 😅

Haha 🤣 I’m glad you think so… bless his heart

I appreciate you watching!

Wonder why you would say that 🤣

They still run great! I have been using them much longer than a year though 😅 thanks for watching!

I… didn’t screw the riser into the butt stock… I drilled holes in it and used Allen key bolts and nuts

@@TNRay well….. I guess it’s just a piece of wood….. 😩

@josephjulian2503 that it is. Function over factory 😉

@@TNRay pardon me, tears are clouding my vision… I bought an MTR a few weeks ago. Scary accurate. No extra holes though.

@@josephjulian2503 they’re shooters, no doubt about that. You’d pass out if you saw what I did to attach the arca rail 😉 I can always find a factory stock to make it back original but I can’t have the functionality I need without the attachments 😉

Thanks!

If I remember right, it’s the magpul one

I appreciate you watching! Did you file as individual or trust?

I appreciate you watching! Did you file as individual or trust?

@@TNRay Decided to go the trust route.

@woodburyfarmskansas I don’t blame you at all. All of my recent purchases have been trust as well. Got 3 back between 3.5 and 5 months on a trust, hopefully you have the same luck!