Видео

Sometimes we have to get eBay parts or Amazon I got a part from eBay used lock tight

Thus is why so many people fail at this hobby. Misinformation is real and this is proof

was the 10a fuse blowing at all before?

why are you allergic to take the head off with the engine out?

L tutorial

Bad info, bad vid

How NOT to set your gains with an oscilloscope 😂

Stopper bolt on belt tensioner. Im sure you did it, but no mention in video. Kinda important for re-installation.

Bro a shop.left the bolt in my tensioner 😂😂

It’s a good video, but how do you set up the oscilloscope sign wave displayed to that size in the display so you can see it clipping? I have the same unit and it’s so small. I can’t see or increase the height of the wave like you have did because I can’t see it. So how did you adjust it to that?

Have the pistons been changed? How long do the original pistons hold?

Taramps does not show clean signwave

Can you do a video and show us how you set up your oscilloscope unit exactly step-by-step so that we can go along with you and do the same thing I cannot get my sine wave bigger for some reason it’s very small and I’m getting frustrated. I’ve watched many videos. I cannot find where to set it up to adjust the amp gamegraph is way too small

my 2015-2020 escalade goes up to volume 63- even at volume 40-45 the 40hz 5db test tone makes me extremely nervous. that shit is so loud i feel like i might blow or damage one of the 16 factory speakers (ive blown one in the past to 50 cent - im supposed to die tonight). so, trying to figure out how to use the damn oscilloscope while the VRRRRRRRRRRRRRRR sound is blaring makes me uncomfortable. i got the waves to fly at a million miles an hour but figured maybe id at least be able to catch where it clips, but i turned the gain all the way up and the waves just got hectic as fk and i never saw clipping so i must be using the shitty o scope wrong. either way i replugged in my speaker wire and figured fk it!!!!!!!!!!!!!!!!!!!!!!

Why was your bass knob set to half way and not max? was your sub level on the head unit set to max or 0?

Do the lower sports lights fit with that big single front mount...

This is INCORRECTLY performed. The power measurement value should be for AC. Amplifiers speaker output (+, -) is measured in AC. He's also got the V/DIV voltage value incorrectly set. It was set to 20v DC I believe. I implore all of you to please read more on this subject. Yes it is relatively easy to set your clipping point with a scope, once you understand how to. This guy clearly skipping his research and thought it would be self explanatory enough once he had a scope in hang. Take the time to read up on this subject, and not hinge all the money and time your spent on your car audio setups solely on this video. There's no guarantee this information is accurate, and if it ultimately leads to you blowing your amps, YOUR THE one that's going to be left, sinking more cash in to this. Your equipment will eventually fail, if it's done improperly. Be objective, and validate the information using multiple sources. Hope this helps.

how much doe this job cost out the door

I did everything you did except I used RUclips 40 htz because I use Bluetooth and it had me with on 10% gain no bass, what could I have done wrong?

Idiots making education videos

Tune gain amplifier under dummy load, do not look like without load, wrong dude

any idea where you can get cheap turbos for the z32 anymore? link doesnt work anymore

If you have your gain turned all the way down when you started, how do you turn it down some more to tobget the oscilloscope correct. That doesn't sound right

I got the same code change that hose and my boost pipe and still have that same code and car is riding rough. Any suggestions

Light popped on today. I’m going to check that line out 2 morrow along with cleaning the MAF Sensors. Jus got my 2016 50i back a few days ago and now a check engine light with the code reading the P0171.😤😤😤😤. Thanks

How do you turn the gain down if you have to start with it all the way down

Then lower it

U mean turn your gain all the way up

Then showed clipping and you said turn your gain down

I thought you had your gain all the way down in the beginning

Who turns the headunit all the way up 🤦🏻

Don't you want to keep the amps loaded while setting gains? Wont the load effect the clipping point? I see people doing it both ways, but under load seems like it could be a more accurate practice

so i just dove into the current sellers of the 120k kit on amazon. i only found 2, evergreen and mizumo. after googling both of their business i decided to not go with the amazon kits because both companies were rated terribly. both companies use GMB bearings which are made in china and claim to supply oe auto manufactures, supposedly high quality, none the less china parts. both companies use the same NPW water pump, they also claim to be oe suppliers for nissan/infiniti. the evergreen kit includes valve covers and grommets, they don't state the manufacture. if you're strapped for cash go with the evergreen kit 100%. if you can afford the better parts but don't want to pay z1/czp inflated bs prices then copy my parts list from below. i extensively researched each product and chose the best quality for buck for each item i linked below. mizumo customers complaining about belt breaking and destroying the engine, poor customer service. www.google.com/search?q=Mizumo+Auto&rlz=1C1CHBF_enUS1029US1029&sourceid=chrome&ie=UTF-8#lrd=0x80c2d0f41d285dc5:0x4aafda8350126f45,1,,,, evergreen doesn't have a google business setup (i wonder why) so i found their yelp page. people were complaining about timing belts being too big and breaking. the timing belt in the kit included on amazon is made by mitsuboshi, apparently the oe supplier for honda/subaru belts. www.yelp.com/biz/evergreen-engine-parts-el-monte i ordering everthing off of rockauto and z1. heres what i got thermostat- www.rockauto.com/en/moreinfo.php?pk=4483713&cc=1209776&pt=2200&jsn=19845 water pump- www.rockauto.com/en/moreinfo.php?pk=948854&cc=1209776&pt=2208&jsn=19847 crank seal- www.rockauto.com/en/moreinfo.php?pk=253639&cc=1209776&pt=5604&jsn=19849 tensioner assembly- www.rockauto.com/en/moreinfo.php?pk=416678&cc=1209776&pt=5721&jsn=19850 timing belt kit- www.rockauto.com/en/moreinfo.php?pk=1145563&cc=1209776&pt=5759&jsn=19851 spark plug tube seal- www.rockauto.com/en/moreinfo.php?pk=8141792&cc=1209776&pt=7220&jsn=19852 camshaft seal- www.rockauto.com/en/moreinfo.php?pk=10400792&cc=1209776&pt=10063&jsn=19854 plenum gasket- www.rockauto.com/en/moreinfo.php?pk=3466197&cc=1209776&pt=10394&jsn=19855 valve cover gasket- www.rockauto.com/en/moreinfo.php?pk=8201116&cc=1209776&pt=10710&jsn=19856 rear crankshaft sprocket washer- www.z1motorsports.com/piston-crankshaft-and-flywheel/nissan/oem-300zx-z32-vg30dett-crankshaft-sprocket-washer-rear-p-2804.html front crankshaft sprocket washer- www.z1motorsports.com/piston-crankshaft-and-flywheel/nissan/oem-300zx-z32-vg30dett-crankshaft-sprocket-washer-front-p-2805.html coolant bypass hoses- www.z1motorsports.com/z1-products/z1-motorsports/z1-silicone-300zx-z32-coolant-bypass-hoses-p-2971.html vtc cam spring- www.z1motorsports.com/camshaft-and-valve-mechanism/nissan/oem-300zx-z32-vtc-cam-tension-spring-p-558.html vtc cover plate oring- www.z1motorsports.com/camshaft-and-valve-mechanism/other-manufacturers/oem-300zx-z32-vtc-cover-plate-ring-p-495.html crank sprocket- www.z1motorsports.com/piston-crankshaft-and-flywheel/nissan/oem-300zx-z32-crankshaft-timing-sprocket-p-552.html dont forget to spray paint your valve covers the most ricer gold you can find while youve got them off

There's another little scope out now called DSO138 Pro.. and it's only $26. (virtually the same as this one in your video).

Open esta 👇

That is not how you set the gap,That bolt is purely for packaging.You should not be telling people the incorrect way.

Hello I had those Kind of issues let us know your settings that sounds to me like un balance engine I had a n/a vg with a bent rod Water 💦 leak on the ecu make misfire on cilíndre 5 wow a bent rod just for a bad ecu in my case take everything I found chips on the cilínder walls caused from the bender rod . Hope you can fix 😢check porosity on pistons they are made from aluminum the tend to crack when the are old and in cold 🥶 environment …condensation the corrosion 🙏🏾😃🇵🇷

I know im late af but if anybody sees this with a 4th gear grind. Changing the trans fluid fixed it for me. My case was leaking. Working on that this week.

Why would you get rid of the garret? Was it blown out or something?

I was going to buy the dd1 then I read that the oscope was more versatile as it can account for voltage drop and a few other things ...lol...then I remembered that 3 years ago when I had a mystery problem with my can bus I had bought an oscope but figured out the issue before it arrived and that scope was still new in the box deep in my closet ...lol...so the choice between the $200 dd1 and the already paid for scope was simple .

Big red flag 🚩🚩🚩 when he tested it on Dc and not Ac current

Hey looking for some insight to fix this exact issue on my z, how does messing with this bolt make the a/c blow cold?

Hey bros nice vid what is the ebay turbo link or model number?

what back tires are those?

On a factory head unit using a lc2i pro how do I find out what the max volume is on the head unit or better yet where do I hook up the oscilloscope to verify the max volume?

Where is your G8 turbo build videos? I can't seem to find them.

Will this work with a stock radio

Did you have to machine the heads surface before putting it together?

Whats the optimal afr for a na-tt on ethanol ??

Looks great. How long take you to finish all this ?