- Видео 204
- Просмотров 330 708
Luca Stere (Luca.Stere)
Румыния
Добавлен 29 июл 2011
Here you can see videos with and about old engines and motorcycles.
Forums where you can see my work: www.motorist.ro , www.russianiron.com.
Forums where you can see my work: www.motorist.ro , www.russianiron.com.
Electronic ignition (12V) for Dnepr/Ural with scooter parts.
In this video you can see an electronic ignition designed by me with ignition scooter parts. This electronic ignition was designed and tested six years ago and was working just fine on a Dnepr 650.
Просмотров: 642
Видео
Dnepr 650 - Play between alternator and camshaft gears
Просмотров 241Месяц назад
In this video you can see how to adjust the play between the alternator and camshaft gears.
Dnepr 650 engine valve rockers problems
Просмотров 2342 месяца назад
In this video you can see some of the valve rockers problems and how I solved the problems.
Assembling the cylinders on my Dnepr 650 engine
Просмотров 3652 месяца назад
In this video you can see the assembling of the cylinders and the heads on my Dnepr 650 engine.
Finishing the sidecar
Просмотров 3993 месяца назад
I have finished the sidecar, as I said in the previous video is not a restoration but just a quick repair in order to have the sidecar on the bike for the anualy sidecars gathering from Calarasi where were present more the 100 sidecars.
Painting and assembling the M72 sidecare frame
Просмотров 3013 месяца назад
In this video you can see the parts and assembling of the sidecar frame.
My Dnepr 650 engine tappets
Просмотров 945 месяцев назад
In this video you can see some problems about the engine tappets.
Working on my sidecare frame
Просмотров 5355 месяцев назад
In this video you can see some work done on my sidecar frame.
Finishing the head cylinders for Dnepr 650 engine
Просмотров 4486 месяцев назад
In this video you can see the work done for the Dnepr 650 head cylinders.
How to unlock the exhaust nuts on BMW R80
Просмотров 2697 месяцев назад
In this video you can see how to unlock the exhaust nuts on BMW airhead R series whotout damaging the threads on the head cylinders.
Manufacturing pushroad tubes for Dnepr/Ural 650 engines
Просмотров 2978 месяцев назад
In this video you can see how to build your own pushroad tubes. The advantage is that you can change the lenght and the outer diameter if needed.
Removing the valve guides - Dnepr 650
Просмотров 4938 месяцев назад
In this video I am showing the work for the valve guides removal on Dnepr 650 cylinder heads.
My 1988 Dnepr 650 engine
Просмотров 5638 месяцев назад
This video is about a 1988 Dnepr 650 engine that I have to complete in order to start a Dnepr 650 project bike that I have in my garage in pieces. The video was already rebuilt 5-6 years ago but at some point I had to take the cylinders and the headcylinders in order to complete another Dnepr 650 engine. More infos in this link where you can see more then 500 pictures with the work done: pro-bi...
The design of BMW R80 exhaust silencers
Просмотров 14710 месяцев назад
In this video we can see the interior design of a BMW R80 silencers. The silencers were cracked at the middle because of the rust and I have to throw them away.
BMW R35 (1938) - Part 55 End of story
Просмотров 3,6 тыс.Год назад
BMW R35 (1938) - Part 55 End of story
Adapting a modern 6V light bulb for the generator light
Просмотров 189Год назад
Adapting a modern 6V light bulb for the generator light
BMW R35 (1938) - Part 54 The carburetor
Просмотров 2 тыс.Год назад
BMW R35 (1938) - Part 54 The carburetor
Ural M72 / KMZ K750 - Ignition timing setup
Просмотров 6 тыс.Год назад
Ural M72 / KMZ K750 - Ignition timing setup
Ural M72 / KMZ K750 Checking camshaft timing gear accuracy
Просмотров 3,9 тыс.Год назад
Ural M72 / KMZ K750 Checking camshaft timing gear accuracy
BMW R35 (1938) - Part 53 The speedometer
Просмотров 1,2 тыс.Год назад
BMW R35 (1938) - Part 53 The speedometer
BMW R35 (1938) - Part 52 The 6V generator (dinamo)
Просмотров 1,3 тыс.Год назад
BMW R35 (1938) - Part 52 The 6V generator (dinamo)
BMW R35 (1938) - Part 51 Back to work
Просмотров 1,5 тыс.Год назад
BMW R35 (1938) - Part 51 Back to work
BMW R35 (1938) - Part 50 Assembling the rear drive
Просмотров 3,4 тыс.Год назад
BMW R35 (1938) - Part 50 Assembling the rear drive
BMW R35 (1938) - Part 49 Assembling the front fork and engine
Просмотров 1,9 тыс.2 года назад
BMW R35 (1938) - Part 49 Assembling the front fork and engine
Unde va găsesc? Mulțumesc.
Bună,am un Dnepr kmz 650 Cc din 1991. Ma puteți ajuta sa îl pun la punct ? Eu sunt din Târgu Mures
Buna ziua! Din pacate nu va pot ajuta, timpul meu este foarte limitat si nu traiesc din reparatii moto. Ca fapt divers, motorul de Dnepr din video este inca pe acelasi banc de lucru si este nepornit doar pt ca nu am avut timp sa-l pornesc.
@lznicu Bună,am înțeles.O zi buna.
I like the way you took the main shaft out, but I doubt that it is the real factory way. Too close
It is possible but I did not found any other way. Also I did not found any manual for BMW R35.
this is a easy to build and budget friendly solution, thank you for sharing all the details! Have you any informations how many degrees this Ignition advances timing with rising rpm?
It should be 28 degrees at 4000rpm according to the Kimco manual.
Interesting - I did not know that early ones used torsion bar springing. My M63 has later sidecar with conventional swing arm and shock absorber. This reminds me of Morris 1000 (common in UK when I was young) which uses same idea for front suspension. On that car you must not mix up L and R side once torsion bar have been used, or they can break if you wind them the wrong way. I think your idea of turning down the worn area and making bronze bushes is a good one. Perhaps you will be able to bore out the sleeve, or make a new one from a bit of pipe and weld to the flange.
Came here from Facebook UK Cossack Club - many thanks for your video, it is very helpful. My Ural is 6v so unless ignition uses small enough current that i can use 6-12v boost converter (which I use for LED headlamp) then I am stuffed. But I can see a use for this technique at the museum where I volunteer, with 1920s "National" gas engine which has a damaged magneto, and your pin-outs are very useful. Incidentally, youtube suggests you are in Romania? I toured N.Romania (route 18?) a few years ago on the way back to Poland from Ukraine, on my old Ural. A very lovely part of the world - I was surprised, as I had no expectations really before I found myself there. All the best from Manchester UK.
Yes, I am from Romania, near Bucharest. I did not tried with 6V.
Felicitări
Salutare, acest tip de aprindere merge si la M72? Mersi
Ar putea merge daca ai trecut pe 12V dar e mai greu de adaptat din cauza rotorului care vine pe axul cu came. In loc de rotor ar putea fi folosite camele de la platina dar nu am probat deocamdata. Daca ai instalatia pe 6V merge foarte bine cu Gotronic de 6V si bobina de Fiat ca cea prezentata in video, eu asa am pe M72-ul meu care e pe 6V.
I have photographed this Bike in Toronto twice ... once at Spadina subway station and once ay Kue Beach Toronto during the Toronto Jazz Festival on Lee Ave. 2024 ;)) love it
Hi Luca, what size shims are you using?
Buen trabajo,!! gracias por las explicaciones,👏👏👏🇪🇦
It's great Luca. Glad you are enjoying riding it now.
В каком городе вы находитесь?
Hi Luca, I am struggling with my clutch. How tighten do I need to pull the nut to the clutch spring? Would be a big help! Best
I don't remember but there is no measure in the manual. I have made the measurments at the time by leting the clutch rod to travel enough. If you tight to much the clutch will not disengage, if you let to loose the rod will not push the clutch cover. So you have to find little by little the correct tightening of the nut.
@@lznicu thanks!
Что за коммутатор? и как осуществляется опережение зажигания при наборе оборотов?
The ignition advance is electronic and is done by the CDI unit.
Интересно видеть как Человек из Румынии Ремонтирует нашу русскую технику
oh man how I wish to do this sometime here.. if only it snowed here like that
Where do you find that style of TDC indicator? Trying to set the timing on my R35 but the TDC indicator I have jams because of the spark plug angle to the piston
www.ebay.com/itm/155718773070?chn=ps&mkevt=1&mkcid=28
@@lznicu Thank you!
Hi, where did you get the replica gauge?
That is a really tidy solution, this is your own design?
Yes, I can say is my own my design in the way that I have designed two parts in order to be able to use some scooter parts (CDI and the sensor) in order to work on this engine. The plate on which I have assembled the sensor and the trigger of the sensor are made on my own design and they were executed by a turner.
great job you done removing this rusted parts!
Nice work
Hello, maybe you can help me. I assembled clutch but its not pressed like on your video 26:35. It's not working, had assembled by your video, any ideas?
Or you have made an error or the fork is worn out and it is not pulling enough.
@@lznicu I restored all this parts. And them is in good condition
@@Andrey_Tarariew Or you have made a mistake or you have a wrong part, maybe the disk clutch is too thick. This clutch is quit simple, you should see what is wrong. When you pull the clutch you feel the tension of the springs or is solid?
@@lznicu on pulling clutch is absolute solid. I checked that is placing correct and not replacing during assembling
@@Andrey_Tarariew That means something is wrong, if you have a solid feel for the clutch something is not ok. The bolts of the clutch with the springs are original?
I also have a R60 but mines a /6........I have a question for you,,, you mentioned at end when measuring the main front bearing difference you need a different thickness bearing??? if you did which did you replace if at all????? on RUclips also "Brookes Airhead garage " he also added oil / lube to the faces of the thrust washers and had a Wrong reading ...... please I would love to know as I'm at that stage now with my engine........ by the way totally loving watching your videos on this build.....hope you do more and more in-depth please......thank you soooooo much Luca. regards Phil
The bearings for axial play are available in different thickness according to your needs after measurment. First you have to measure the play and after that you establish the thicknes of the bearing that you need acording to the specs in the manual and your measurements. There are four bearings available: 08 Stop disk 2,483-2,53 2 11111256973 $35.31 08 Stop disk 2,53-2,578 2 11111256974 $35.31 08 Stop disk 2,578-2,626 2 11111256975 $35.31 08 Stop disk 2,626-2,673 2 11111256976 $35.31 Give me a link from Brookes Airhead to see about that wrong reading but I don't thing it was because of the oil because the oil film is too thin to influence the measurements.
@@lznicu hi Luca thank you for replying. here is extensive article on main engine Trust Washers.....I found his mistake and how he corrected it.........I'm following his and your ways ......I'm glad to see your vids again hope your well and keeping busy with your video of bike and especially engine building .....please more vids on this and more explanation on your process it is a great help so thank you.... I'm just clean the oil pan and bottom of the block as there's a little gap so I'm lapping those parts just got to check the crank shaft oil passages one final clean then back to gather. it's been a learning curve for me at 65 but loving it.......hope you keep in touch...stay safe chap..regards Phil
похоже в России такой не поставить..
Почему? В чем проблема?!
@@lznicu.. датчик не понятный, комментарии одни иностранцы пишут.. С коммутатором не понятно как подключён. И на раме под баком.. сверхновая установка, непонятного образца.. Даже предугадывать не стал, иностранцы додумались, наши нет.
@@kenteytonor7178 Я постараюсь найти время, чтобы объяснить эту систему зажигания и необходимые детали. Подпишитесь на мой канал RUclips, чтобы получать уведомления. Это простая и дешевая система зажигания.
A screwdriver? To separate alloy castings? Seriously?!!
As you have seen I did not use excesive force and I did not use the screwdriver between the surfaces. I have pushed with the screwdriver in the shoulders designed for opening the case.
Lækker mc husk nr-plade på forskærm er forbudt 👍🏁❤️🏁👍🇩🇰
aber lieber ohne Pumpe fahren
Mein Pumpe funktioniert auch
Habe selbe aber in Zivil Orginal lack
Salut. Cred ca cunosc istoricul acestei motociclete de inainte sa o restaurati dvs. Am remontat-o ptr ca era dezmembrata . Pe aceasta motocicleta inclusiv regele Mihai s-a plimbat.
Salut! Orice e posibil... ar fi interesant sa descrieti aici in cateva cuvinte istoria ei.
От чего стоит шторка?
sehr schönen Klang deie fischschwänze
Ladekontrolle geht bei Gasannahme nicht aus !!!!Regler ???
That red light is permanent for iginition on green red is for neutral. The charging system is a modern one whitout light control and the owner wanted to have the red light for ignition on.
@@lznicu alles gut Danke für Info
👍
Thanks Luca. Great video as usual. This is a job I will need to get around to myself in a few thousand kilometers on my 650 Dnepr.
I 'have a question concerning the fork.What kind of oil and quanty is needed by pipe ? Thanks a lot in advance. Regards from France.
100cc for each pipe. It is not a hidraulic fork so you can use any type of oil. I have used T90 transmission oil but like i said you can use any tipe of oil.
👍thank you very much !@@lznicu
Why you don't speak Russian? I think if you will make videos on russian you will have more subscribers and views
I am not russian.
@@lznicu yes I see you are Romanian
hi luca how to install carburator in the engine
Excelent tutorials. Congratulations. Very professional. We are restoring now an R35 and R4. Can you recommend sites to buy parts? Thanks in advance
www.motorradmeistermilz.de/ and oldtimergarage.eu/gb/ . There are others sites but this are the usual.
You're the boss man the best one
What is the high pitched "chirp" I hear when its running? I have same thing happening with mine.
I had a problem with the camshaft, described here: ruclips.net/video/QwU-Y_M7HQE/видео.html . After solving the problem the chirp sound dissapeard. In your case if the the camshaft is not the problem it could be the ignition timing.
There are several options to get rid of it: oil seals instead of original rubber seal (59 mm diameter) and into the axis gear. The second is oil vent in the body of drive to drop off overheated air and oil fog which increase pressure and squeeze oil out.
I know about this improvments but after this work the rear drive is working just fine. I have now near 1000km and no oil loss until know. On this rear drive which is actualy a Dnepr 650 rear drive with a M72 cover suspension I have the ventilated dipstick wich release the pressure built inside the rear drive.
Why you place engine from K750? And handelbar from K750, MT...
Just because it was available, it was rebuilt by me for a K750 project that is paused for the moment.
Hello what type of chain did you use on this engine? Or from which model it can be replaced?I can't find analogue.
We had a complete set for timing gears and chain: www.motorradmeistermilz.de/Antrieb-fuer-Steuerung-EMW-R35
Great video! In Russia we don't use Ural/Dnepr motorcycles as a solo ride, 99% are used with sidecar, so there's no good video instructions how to properly install side stand. As far as I'm building bije without sidecar, your information is really useful for me, thanks.
Thank you so much for this series. Invaluable R35 resource. You are very good and I enjoyed the calm style.
Sooo nice work, I´m just working with -50 R/35
Hello, great video and fantastic work. Where did you get your replica parts?
There are various shops on internet but mostly from here: www.motorradmeistermilz.de/