![Wolf Fur Programming](/img/default-banner.jpg)
- Видео 31
- Просмотров 96 989
Wolf Fur Programming
США
Добавлен 2 янв 2021
Programmer, rust enthusiast, Linux dweller.
Find all my links here: wolffurprogramming.com
Contact me on Mastodon: @wolffurprogramming@fosstodon.org
Find all my links here: wolffurprogramming.com
Contact me on Mastodon: @wolffurprogramming@fosstodon.org
Raspberry pi 5 nvme drive working
Argon NEO 5 M.2 NVME PCIE Case for Raspberry Pi 5 tested working with pcie gen 3 speeds.
SSD used: SAMSUNG 980 PRO SSD 1TB PCIe 4.0 NVMe SSD
Instructions I used for getting a nvme drive to work
www.jeffgeerling.com/blog/2023/nvme-ssd-boot-raspberry-pi-5
SSD used: SAMSUNG 980 PRO SSD 1TB PCIe 4.0 NVMe SSD
Instructions I used for getting a nvme drive to work
www.jeffgeerling.com/blog/2023/nvme-ssd-boot-raspberry-pi-5
Просмотров: 1 115
Видео
Geekworm X1003 Raspberry Pi 5 nvme ssd hat hat review
Просмотров 1,7 тыс.7 месяцев назад
Complete and total Trash. Does not work for me. Comes with no instructions. No indication of which way the ribbon cable is correct. Most SSD's don't seem to work at all with it. Avoid this at all cost. Wait for something better. Geekworm should do better. I would have done a longer review but didn't want to waste any more time on something that doesn't work at all.
Raspberry pi 5 Minecraft, Minetest, and Veloren
Просмотров 4,7 тыс.8 месяцев назад
Here I take a look at Minecraft Java edition, Minetest and Veloren running on the raspberry pi 5. 00:00 Intro 01:06 MineCraft Java Edition 03:07 Minetest 06:34 Veloren
Raspberry pi 5 review and gaming demo
Просмотров 9 тыс.8 месяцев назад
Here I take a look at the new Raspberry PI 5 performance with a emphasis on games natively compiled for arm. 00:00 Intro 02:28 Mario 64 pc Port 02:54 Ocarina Of Time PC Port 03:58 TuxKart 04:25 Doom 3 06:00 The Elder Scrolls III: Morrowind 07:56 Kodi and 4k video 12:09 Portable Laptop mode and conclusion
Reverse Engineered, decompiled games for you and your Linux experience
Просмотров 850Год назад
Reverse engineered, decompiled games for you and your steam deck! Zelda, Mario and more!
Lineage OS on the Nvidia Jetson Nano!
Просмотров 4,3 тыс.Год назад
Here I take a look at Lineage os on the Nvidia Jetson Nano. You can follow the instructions here wiki.lineageos.org/devices/porg/ Kodi can play just about any video you throw at it. I unfortunately was not able to make it work without google services. But it's great we can finally use this device to play movies.
A look at GrapheneOS on the Pixel 6a
Просмотров 4,8 тыс.Год назад
In this video I take a look at and talk about GrapheneOS on the pixel 6a. Which was recently on sale for 300$.
Steam Deck Docks. Watch this before buying a dock
Просмотров 803Год назад
Other people are buying the JSaux docks but their dual screen dock is always out of stock. Most USB c docks work fine and you might could get by just using steam link. This video shows various scenarios you might encounter trying to run the steam deck on a external display with a dock and with steam link.
Pinephone Pro Wake from Suspend Audio Working And Flutter works!
Просмотров 1,1 тыс.2 года назад
Audio is now working when waking from suspend! Also flutter apps work correctly now. In the past text input would come out backwards. Now it works perfect!. Try fluffy chat on pinephone. it works Great!
Pinephone Pro Camera working with megapixel
Просмотров 2,7 тыс.2 года назад
Pinephone Pro Camera working with megapixel
Lineage OS on the Odroid n2 plus as a media center
Просмотров 4,8 тыс.2 года назад
Lineage OS on the Odroid n2 plus as a media center
Pinephone Pro Camera's showing video
Просмотров 1,2 тыс.2 года назад
Pinephone Pro Camera's showing video
Toxicity in the FOSS community and recent drama in this channel
Просмотров 1962 года назад
Toxicity in the FOSS community and recent drama in this channel
Flutter running on the pine-phone pro (FluffyChat)
Просмотров 1,1 тыс.2 года назад
Flutter running on the pine-phone pro (FluffyChat)
Plasma Mobile Oneplus 6t postmarketos
Просмотров 3,4 тыс.3 года назад
Plasma Mobile Oneplus 6t postmarketos
Manage Packages In C++ like Rust and Golang
Просмотров 1,9 тыс.3 года назад
Manage Packages In C like Rust and Golang
Try openmw
Pretty sure that is openmw. It worked pretty well on the RPi4, except when the storms would spawn.
I would like to see the android compatibility layer please
can i install sdk tensorrt, cuda ,opencv on lineage os ?
Turn Vsync off and set the max framerate to unlimited, graphics to fast, clouds off, 8 or 5 chucks of render render distance and 5 of simulation distance
All I see him is clicking the screen 3 times to get a response, constantly.
Plan on doing this for use with my crt monitor. Can’t wait.
Thanks for the demo, are you running the 8g or 4g pie?
8gig
could you try using a gpu with the pi maybe then it would run a lot smoother because i feel like the pi suffers more because of graphics then actual cpu power
I don't have the tools for that. It's not easy to attach a gpu
@@wolffurprogramming yeah ive seen it myself now a dissappointment but what should one do still thanks
Question: how did you get audio out of the Odroid n2+ ? Thank you
Extremely laggy :(
Wolf Fur Programming is back!
i just flashed my OnePlus 6T with the mobian image, but it goes to a screen where it tells me to press enter to continue, and i have no way of doing so.
I'm the owner of Geekworm, and I'd like to thank you in advance for shining a light on the x1003 issue; The problems with the video and our improvements need to be pointed out: 1. The FPC is connected in the wrong direction in the video (clearly visible at 1:01 into the playback). The FPC is clearly labelled as TO PI5 and TO PIP. 2; 2. From the feedback we have received in the past few months, in the early stage, most of the problems can be solved by updating the eeprom of PI 5, and a small part of them may be the problem of the wiring. So we now provide an extra white FFC cable, so that X1003 will provide a total of two FFC cables just in case.
I did try the cable both ways. Your support is pretty awful too. I got no refund and no explanation of which ssd's work. I was really hoping for one or the other. It's still just trash on my desk. Least you could do is put some instructions in the box for which way the cable goes so I don't keep having to try each way and wonder whether it's the ssd , the cable or a faulty unit.
@@wolffurprogramming I've got 4 RPi5 with x1003's booting from PM991 512GB 1.6amp SSD's and haven't had any issues. Three of these are K3s master nodes. I am even forcing PCIe gen3 and haven't had any issues or warnings in dmesg. I have several of Geekworm's products and haven't had any issues. They make good stuff in my experience and have wiki's which are pretty helpful.
How did you use it as a file server when one SSD is not that good for data preservation?
I’m considering on buying it, but would like atleast 2 SSD slots
Can you test n64 controller on dolphin on mobile please? Does it work?
Thanks for the demo and info. Yeah, this did not work for me either. Dammit
such trash video... unusable
Same thing happened to me. you're still good. The latch pivots up and pivots down and slides back when locked. I carefully put mine back and it works. Geekworm m300 has the same kind of latch. It's troublesome to put it back but will till work.
still work
Maybe the instructions should be better? There is no logical circuitry on that HAT. Literally nothing but wires going to the SSD data pins and power delivery - that's it. There's nothing "between" the pi and the SSD but the ribbon cable and traces on the hat PCB. If you're having SSD compatibility issues it's a config/driver issue> And yea don't open ribbon cable connectors with your fingers. they are delicate. use something small and pointy so you have leverage to pry up the edges.
I was not expecting the end 😂
LMAO
Do you have access to Google/Play store?
You can add Google Play if you like but I like to stick to mostly FOSS systems where possible.
Hey I had a few questions on this.. Any updates on how it runs (like are there any updates on the drivers/hardware accel)? Are there also apps that are incompatible, or is it safe to assume the majority of apps will run? And finally, does it recognize your SIM card from within waydroid (I'll probably assume yes)? To explain my use case, there's 2 apps I'm kind of stuck with that are dependent on Android, it's a digital identification app and banking app, the former of which probably requires the SIM card to be recognized, as it's rather peculiar about it's authentication.
I was abble to run smoothly few games using Batocera OS without OC at all but on Raspberry OS it ran poorly.
If you use Optifine, you can essentially double your framrate. I was able to achieve a locked 30Hz on 1280x1024 with most settings scaled down, render distance 5 or 6. I expect that it'll run a light micro mod pack ~20 decently with a pi 7" screen in a cyberdeck config
Hey! Thanks for the video! An idea for a following video: controller compatibility with the Raspberry Pi 5 (Xbox 360, Xbox One, Xbox Series X/S, PS3, PS4, PS5, Nintendo Switch and others). I know you have the Series X/S, and maybe the Xbox 360, so if you could at least show them working flawlessly (or not) and how to configure them (if needed), maybe firmware updating idk, it'd be neat. And long live MineTest!
Xbox One/PS4 and newer have Linux drivers so they should just work. I'm not sure about the status of Joycons.
@@ebouwman034 yeah, but how do we update firmware on those? Are they included on the Linux Vendor Firmware Service? Or do we need some proprietary software to update them? I heard the Xbox Series X needs a firmware update in order to work properly on PC, if I'm not mistaken. I could be wrong tho
@@softwarelivre2389 I forgot about that. When I first got a series x/s controller I had update it on my Xbox to work with iOS and Linux but that was 2-3 years ago. If you have a windows computer you can update it on that but I don't know about Linux. I'll also add, on the steamdeck I noticed serious input lag with the Xbox controller until I edited some config files. I can't remember what I had to do though.
@@ebouwman034 I don't have any Windows/NT machines available, so if I ever purchase that controller, then I'm out of luck, it seems. I hope the firmware update comes enabled by default on new units or that LVFS works for the controller. And that's why we need a video on that.
I m not sure that the raspberry pi5 came with android 14 on it already. If it didn’t, I’d like to know who you put android 14 in the raspberry pi 5….please and thank you.
Look up kongstakang android 14 raspberry pi 5. He has the instructions and images.
As a matter of fact, I didn't. Pretty neat!
Cool!
for minecraft try fabric loader with the sodium mod it optimizes the game more. I believe when I tried minecraft on my raspberry pi 400 I was able to get around 15-20 fps
try version 1.8
Hi! Is the Ocarina Of Time PC Port native? Where can I find a binary for raspberry pi 4/5?
Yes it's native. It's called ship of harkinian. And you'll have to compile it yourself
@@wolffurprogramming did you directly follow the Linux build guide on Github or did you to deviate from their instructions?
@@nado_x Been a few weeks now. I believe I read the dockerfile for inspiration. I didn't have to change any source files but I may have installed a few different dependencies as a result of build errors
@@wolffurprogramming Thanks, I'll have a look at the docker file! :)
@@nado_x Afterwords, I also managed to compile myself successfully using just the guide in github
I've been able to get doom3 running very acceptably... There are a couple things that help... Running the desktop at 1080p rather than 2k or higher helps... Also switching to x11 helpa. From there you can play with the quality settings in the game... I think I'm currently running it with medium quality settings.
Have you tested any other old PC title on the pi5?
What about Minecraft java I've been searching and Im surprised nobody has done it
Ill try it
@@wolffurprogrammingMinetest too, the free and open source king of block games.
So there are several Minecraft Java edition launchers available on pi apps... I'm currently using gdlauncher successfully on a pi5
The "mesa-vulkan-drivers" package wasn't installed by default on Raspberry Pi OS 64-bit, when I tried it. Installing it made Vulkan try to work. But when I tried the Vulkan game, Veloren (it has a native arm64 port in flatpak), the GPU locked up once I entered the world.
Yeah I tried the same driver with dolphin and it didn't work. Veloren would be a fun game to test! How well did it run in opengl?
Very interesting about the H.264 encoding/decoding, I bought a rp5 to use as a media player on the tv's spare hdmi port, constantly playing through a shuffled list of music videos, however i've been having problems with all media players trying to get more than 10% of the videos to play at all. Maybe in a few months there will be software fixes so that VLC etc can play more variety of codecs better on the rp5 but for now I've shelved the idea.
Did you try running those videos on Firefox? Can you try and reply ?
VLC had pretty good compatibility for me. Maybe try the videos in kodi and see if it plays better. Or send me a sample to test.
@@wolffurprogramming I figured it out, I downloaded a playlist using 4k video Downloader program and for a lot of 4k videos it defaults to using av1 over H.264 for .mp4, so I tried downloading in mkv instead and also used obs to remux to .mp4 and put both on the pi 5, it ran both files absolutley fine I think the codec is VP9.
@@arcanethink Chromium runs RUclips videos much better than Firefox on the Raspberry Pi 5.
Many memories unlocked
Wait are you playing pc games on the Pi 5? Finally someone is!
new Wolf Fur Programming video = instant like. Glad to have you back, my friend
Much appreciated!
Pretty neat! Looking forward for the Fediverse video!
I would like to put together one about that and other decentralized media.
A year later, is the camera still green? Or now it's fixed and works as well as the OG Pinephone camera? Thanks man, hoping to see more videos from you soon.
My pinephone pro broke. Pine support was pretty awful about it so I'm not going to buy a new one.
@@wolffurprogramming that's so sad to hear :( seems Pine64 is just Purism but shipping devices then :(
@@softwarelivre2389 Yeah I recommend people just use a pixel with GrapheneOS right now. Pine64 has no idea what they are doing
how is possible go to recovery mode without using the 2 pins action? My board doest have those pins, only holes
The lack of a file manager is a bummer. I just finished installing Lineage OS ATV onto an Nvidia Shield Pro 2019 and I would actually recommend using the Shield over a Jetson for a couple of reasons. It is a purpose built ATV box but that is not one of them LOL. It also has no file manager so I don't think it is possible to install apk's from the OS. It is more powerful than the Jetson but more importantly there is a TWRP recovery image for it. TWRP has a built in file manager so when the Shield is in TWRP recovery mode, you copy your apk files from a usb drive directly into the apps folder on the Shield. So far, apps that I have installed this way have worked quite well.
I’m just curious if android would allow a Nano on the play store. Linux (Ubuntu) can do RUclips just fine, I’m just curious about the play store on it🤷🏻♂️
Thx for that sneak peak👍
I lost moment to install the gapps, now my Jetson only show Nvidia Games on AndroidTV. Is there some way to install Gapps from this point? I tried to enter Recovery Mode so I can execute adb sideload but none worked. Can I still get into Recovery Mode?
No sounds like you need to start over. Install gapps while you are installing lineage os.
Did you install any cooling fan for the jetson nano, as mine is slow as it overheats?
No I have not. Just the default heatsink
@@wolffurprogramming Is it possible for usb boot for this?
@@kennethgomez6655 I have not seen anyone do that in android.
mobian kernel 5.19/rockchip
Has anyone managed to get Chromecast-builtin to work on this; either via original image or by manually compiling?
any update for wifi card Intel 8265AC. how to update the wifi driver.
Nobody has gotten bluetooth or wifi to work.
Just add some more info, the dev for this Android build has a topic for this on the Nvidia forums. Look for a user name is Steel01. Skimming through all the posts as I understand it's not possible to get the wireless connectivity working due to some device tree limitation or something and the dev has no plans to add support for it or something like that.