- Видео 61
- Просмотров 136 278
TOGAtech
Великобритания
Добавлен 25 июл 2019
Hi and welcome to all. I started this channel a couple of years ago with the express purpose of sharing information with like minded people for FREE.
I had been frustrated by the number of channels offering help with your hobbies but for a price.
I enjoy a number of hobbies including Flight and Driving Simulators, electronics, 3D design and printing and I hope that I can help you to learn, share and enjoy these hobbies with me.
I had been frustrated by the number of channels offering help with your hobbies but for a price.
I enjoy a number of hobbies including Flight and Driving Simulators, electronics, 3D design and printing and I hope that I can help you to learn, share and enjoy these hobbies with me.
Binham Priory Norfolk
Hi just a quick video using my DJI Mavic Mini SE. I was visiting Wells-Next the Sea in Norfolk and came across Binham Priory.
Binham Priory is among the most complete and impressive monastic ruins in Norfolk. This Benedictine priory was founded in 1091 by Peter des Valoines, a nephew of William the Conqueror. Many of its priors were unscrupulous and the history of the priory is one of almost continuous scandal.
The nave of the priory church, with its splendid 13th century west front and fine tiers of Norman arches, is now the parish church, and displays the former rood screen with medieval saints overpainted with Protestant texts. The extensive ruins beyond emphasise the original size of th...
Binham Priory is among the most complete and impressive monastic ruins in Norfolk. This Benedictine priory was founded in 1091 by Peter des Valoines, a nephew of William the Conqueror. Many of its priors were unscrupulous and the history of the priory is one of almost continuous scandal.
The nave of the priory church, with its splendid 13th century west front and fine tiers of Norman arches, is now the parish church, and displays the former rood screen with medieval saints overpainted with Protestant texts. The extensive ruins beyond emphasise the original size of th...
Просмотров: 55
Видео
DIY Fully Articulated Ceiling Camera Mount Build
Просмотров 1007 месяцев назад
This is my version of Studio Wildlife's build of a fully articulated ceiling camera mount. I needed to make space in my small studio for filming and the use of camera tripods is impossible. I am starting some videos where I need to film myself painting and the best position for the camera is over my left shoulder. Using this type of camera mount makes it possible in a confined space. My thanks ...
DIY Grid Brows Build for iRacing
Просмотров 4328 месяцев назад
This is my DIY build of a set of Grid Brows for use with driving simulators including iRacing. These Brows are made from 3D Printed PLA and include two sets of nine LEDS WS2182B strips controlled by an Arduino Pro Micro. The software is provided free by Simhub available to download from www.simhubdash.com My 3D Printed files and wiring diagrams are available to download from Thingiverse www.thi...
EZY8121 Bumpy Landing Lanzarote
Просмотров 217Год назад
Live cam Lanzarote Airport watch this Easyjet flight take a sudden crosswind resulting in a bumpy landing
Airbus A320 Button Box for MSFS 2020
Просмотров 1,8 тыс.Год назад
A new button box for Microsoft Flight Sim 2020 based on the FBW A320 Overhead Panel. This button box uses buttons and switches linked to an Arduino Mega 2560 and Mobiflight. I wanted to increase the level of immersion in the simulator and remove the need to flick between views and use a mouse. Even though this is designed for the FBW A320 the principles can be modified to be used for any aircra...
Star Wars Style Blast Door Build
Просмотров 281Год назад
This is a Star Wars Style Blast Door build for my diorama photo set. It is based on a build by Frank Diorio of Diorama Workshop.com. All plans and decals are available for free from his website. Most of these builds are simple to do but are extremely effective. I encourage you to take a look at his website and youtube channel and make one for yourself. Thanks frank I really enjoyed building thi...
Flight Sim 2020 X -Touch Mini Part 3
Просмотров 2,8 тыс.Год назад
Continuation of the series of videos making a flight sim controller for Microsoft Flight Sim 2020 using the Behringer X- Touch Mini midi controller. To use this midi controller as a flight controller you need several software applications which are X-Touch Editor , Lorby's Axis & Ohs ; FBW A320 addon for flight sim 2020 and Delgato streamdeck FBW A320 profile. Downloads: Lorby's Axis & Ohs axis...
X- Touch Mini for use with Microsoft Flight Sim 2020
Просмотров 6 тыс.2 года назад
X Touch Mini for use with Microsoft Flight Sim 2020 Using X-Touch Editor to get it ready for your flight sim. In this video I will take you through the process of altering your x-touch from a midi controller to a button box. Once you have X-touch editor installed and opened replace each control from a "note" to "CC" Then assign a button number to each encoder and button. You can follow my layou...
X Touch Mini Intro and Unboxing
Просмотров 1,9 тыс.2 года назад
The unboxing and review of the Behringer X-Touch Mini Midi Controller. I was searching for a universal USB controller that I could use for Microsoft Flight Sim 2020 as well as other applications like Adobe Lightroom and Photoshop. The space on my gaming desk was becoming smaller and smaller so I needed a solution to integrating all of my interests and hobbies to use one controller. In this vide...
VR Sim Button Box
Просмотров 6032 года назад
This is my design for a virtual reality gaming button box. It has 24 buttons , 4 Rotary encoders and two axis controls. The whole design is built around an Arduino Leonardo. I have seen the rising cost of gaming simulator accessories and I wanted to produce a product that was useful for gaming in VR but was very inexpensive. The materials are simple just 20 x Cherry MX keyboard switches, 4 x KY...
DJI Mini SE Review & Test Flight
Просмотров 682 года назад
My unboxing and review of the DJi Mini SE Fly More Combo Pack. I was looking for a drone to use for RUclips filming as a platform as remote cameraman. This drone has exceeded all my expectations with its 2.7K video camera and 12Mega pixel still shots. I am sorry for the poor quality overhead footage but it appears my computer can not handle two cameras at once and the use of a green screen has ...
Oculus Quest 2 for FS2020 Unboxing & Review
Просмотров 1732 года назад
In this Video I will be reviewing the Oculus Quest 2 and my honest thoughts on it. I believe that the Oculus Quest 2 is one of the best gaming devices that you can get heading into 2022. However there are a couple things that I wish I could change with the Oculus Quest 2 but for the most part I LOVE IT. You do have to have a Facebook account in order to create and Oculus quest account in order ...
A10 Cockpit Sim Build Part 2 Main Instrument Panel
Просмотров 3542 года назад
A10 Warthog Cockpit Sim Build Part 2 Main Instrument Panel This is the second video in the series taking you through my journey of building an A10 Warthog Cockpit Simulator. In part one I showed you where to source FREE design files to base your build on. I will show you how to upscale diagrams using INKSCAPE and ADOBE ACROBAT PDF READER to full size to use as cutting templates. I showed you ho...
A10 Cockpit Sim Build Part 1
Просмотров 5662 года назад
A10 Warthog Cockpit Sim Build Part 1 This will be a series of videos taking you through my journey of building an A10 Warthog Cockpit Simulator. In part one I will show you where to source FREE design files to base your build on. I will show you how to upscale diagrams using INKSCAPE and ADOBE ACROBAT PDF READER to full size to use as cutting templates. I will show you how to cut, construct, pa...
Stormtrooper The Fallen a 3D Resin Build
Просмотров 542 года назад
This is a 3D Resin printed 1/6th scale Stormtrooper. I first saw this pose on a video by BoyleiHobbyTime on RUclips ruclips.net/user/BoyleiHobbyTime. I thought it was such a powerful piece that I just had to have one of my own. The STL is from Cults3D cults3d.com/en/3d-model/game/star-wars-stormtrooper-1-12-articulated-action-figure The print turned out perfect in resin but the articulating joi...
3D Printing Action figures A Beginners Guide
Просмотров 1432 года назад
3D Printing Action figures A Beginners Guide
ETS 2 & Logitech Heavy Equipment Bundle
Просмотров 16 тыс.3 года назад
ETS 2 & Logitech Heavy Equipment Bundle
Airbus A320 FCU Part 4 Managed and Selected Modes
Просмотров 4,1 тыс.3 года назад
Airbus A320 FCU Part 4 Managed and Selected Modes
Airbus A320 FCU Build for Flight Sim 2020 Part 3
Просмотров 7 тыс.3 года назад
Airbus A320 FCU Build for Flight Sim 2020 Part 3
MCP Autopilot Build for FS 2020 Part 2 Leobodner BU0836X and Rotary Encoders
Просмотров 4,4 тыс.3 года назад
MCP Autopilot Build for FS 2020 Part 2 Leobodner BU0836X and Rotary Encoders
Are you limited to 9 lights? Is there a reason other than space concerns that keep the length at 9 LEDs long? Curious if a build could be say 18 long?
Pls anyone. Im not interested in the "kill function" just power on/off. So can anyone just tell me, which pair of the 2-3-4-5-6-7 are the power on/off connections.
I think the alternate flaps and yaw damper are in the wrong spots, the yaw damper is on the bottom of the panel and the alternate flaps are around the center of the panel.
Thank you for sharing, but my X-touch device, jump layer buttons A and B cannot be used. Please provide a detailed introduction to the configuration of AAO buttons 17 and 26, as well as other related configuration parameters
hi, Please could you send me the mmc file.
What is the name of paper please you printed on for the button names?
It was self adhesive transfer paper . Thanks for watching
Thanks, I will have a hunt on amazon.
I am getting this delivered today, for my 6yr old grandson to play gt7 on my ps5... I didn't want it at all 😉 😉 that's what I told the wife but I managed to agree because after all he is our grandson.. it looks good basic value for money but some folk will never be satisfied... thanks for making this video 👍
Hello. I have the following problem with the Logitech G Side Panel. When working with the joystick, it goes infinitely to the left for the system, which is why the entire panel does not work stably. How to fix it? ruclips.net/video/dYOEoxh-cPg/видео.html
Very good, will be making a set, well done
anybody has the files for this? can't find them anywhere
Hi thanks for watching. I believe the files are on my cloud drive I will check but there should be a link in the description.
@@togatech1111 hi thanks for the reply, i checked the link in the description and it didn’t work, if you can find it that would be great. Thanks.
Thanks for creating and sharing!! 🙌
Thanks for watching
Been meaning to build something like this, thank you!
Go for it! Thanks for watching
So good. Don’t know how you know so much. I need these 😉
Glad you like them!
Compatible with X box X?
I am not sure I dont have an Xbox and I believe the event codes are different from the pc version but thanks for watching
I would like to know how to write some text like "hello" and sending it by pressing just a key. I really can't find a way to do this and I know it's not a question related to the video but I really don't know how to achieve this I'm really hoping it's not that hard, can someone help me? I'm using Hidmacros and a custom keyboard that I made with arduino. Thanks!
I am sure this is possible but I am not certain how to do it. You need to assign a text string to a key. There must be smarter people than me out there that can help. Try searching for text strings..... Thanks for watching
Does force feedback work in ETS2?
Sorry I can not answer that question as I do not have a force feedback wheel. Thanks for watching have a Merry Christmas and a Happy New year.
Can seat be adjusted for a 8 year old
I dont think you can from out of the box but you could fit an adjustment rail. Thanks for watching and Merry Christmas and a Happy New Year
Hi!! The conector is RJ45 8P8C or RJ12 6P6C?? Thanks and good job!
Let me check
Thank you for your time to put such a DETAILED step by step video! I have learnt so much and it is really appreciated.
thanks
how do you have a control signal for the transistor, if in the previous video there was 0.01 volt on the bed terminal
Hi thanks for watching. It has been a long time since I did this one the printer is still working. I can only assume the the trigger voltage comes from the controller. If the controller is not outputing you may need a new controller.
@@togatech1111 this would be true if you were taking a signal from the mosfet gate of the heating bed, but in the last video, there was no voltage at the terminal, as if the transistor was closed or not controlled at all
It can’t find my side panel do some one now Whats wrong cause i don’t can find
hi enjoyed you video wonder could I ask for some advise. Leo Bodnar BBI-32 board, testing one rotary encoder (same as you use). can see it working in the Leo Bodnar software, and the windows game controller(joy.cpl). i can configure it uin MsFS202 seems to validate and safe but does not work in the game. adjust altidude increase /decrease (MSL). any help slowing going mad/ Regards John
Hi thanks for watching. It could be a number of things. First ensure you have a rotary encoders with a debounce circuit this gives smoother control when turning. Using Fs2020 game controls are simple key presses and you cannot alter the rate of the turn you could do this using FSUIPC. I hope this helps for the simplest solution is to check you have good quality encoders
@@togatech1111 sorry should have said same rotary encoder as you have used in the video John
Thanks
Hello sir that’s very nice I wanted to ask you is there any possibilities for cutting and engraving a piece of acrylic please Am interested in making one of these for my personal use please Thanking you in advance
Dear I saw your 2019 video “VRInsight MCP Combo Panel Worth It or Not ?”, which is a bit old and probably was a test with FSX. I would like to know VRInsight MCP panel also works with FS2020.? Is it possible to reprogram the panel using Spad Next by configuring it for Cesna 172? Thank you for your time
Hi thanks for watching. I believe you can get some of the functions to work on FS2020 using VRbridge software and you can write your own LUA code. You may want to take a look at my video on the Beringer MIDI controller which you can program for multiple aircraft.
@@togatech1111 thanks I ll look for it
Great video mate! This video has finally convinced me to purchase the BU0836X for my Train Simulator controller project. Thanks indeed! Where did you purchase the single stranded telco wire?
Thanks for watching. It was left over from when I was a telecom engineer but you can find it on Ebay as cross connect or twisted pair telco cable.
@@togatech1111 thanks again mate. Your videos have helped me greatly.
Hi there. Can you tell me if the knobs are tight or nice snd loose to turn? I’m after the easy to turn loose knobs as have weak hands. Thank you.
Hi the beringer midi controller knobs are rotary encoders which have a very smooth resistance free turn. Thanks for watching the video 👍
Do you have to assign each axis for the Fenix A320 yourself? Or can you save yourself all this with existing scripts?
Hi thanks for watching. I have not used the Fenix A320 but a good source for templates is flightsim.to they may have one you could down load.
great job
Do you have any trouble with the PLA melting when you solder the wires to the switches? Thanks.
You have to be very careful if I can solder the switches first I do if not use a fine tip and the lowest heat you can. Thanks for watching 👍
@@togatech1111 Thanks. This is the kind of thing I'm wanting to do. I gather PLA is rather fragile. Would ABS be "safer" to solder with? I know the ABS off-gasses VOC's caution is required. My printer won't be here for a while, so I'm starting with a simple project. The Garmin GTN 750xi powered by the TDS unit. Very excited. Currently I know nothing. That's OK though, it will be fun learning!
It is a great hobby and 3D printers make it possible for us to design and build anything we can imagine . I have never used ABS I find if you make the PLA parts 5mm thick with at least 50 percentage infill they are strong enough for most things. Good luck with your builds post them if you can it would be great to see how you get on 👍
Amazing work! May I know where did you find the measurements and graphics?
Thanks for watching. I got a lot of my measurements from Markuspilot checkout this link www.markuspilot.com/B737DATA/B737_DATA.html
Nice work. Way above my head. 👍
Thanks
Hello, was looking at making my own Knobster but came across the X Touch Mini and then you video tutorial which now going in that direction. Great helpful video. Thanks
Thanks for watching I looked at the knobster and it works great but you need air manager which I found a bit of bind with improvements to the FBW A320
hi where can i find the wiring diagram ?
Hi thanks for watching I thought the wiring diagrams were on my Dropbox please let me know if you can’t find them and I will check it my end.
@@togatech1111 hi,thanks for ansering but where can i find your dropbox? :)
Hi I have a problem with my Dropbox but I found this link on the web drive.google.com/file/d/1C5RmyIIZU1heOJxz9rix7d8_B9uAOv3O/view?pli=1 I hope it helps
Hello TOGAtech, super series, thank you. One question so far, where would you suggest I get the C172 g1000 template and others from? Not up to a320 yet !
Hi sorry for the delay in replying but I have been ill. Most of the profiles can be found on flightsim.to I hope this helps and thanks for watching.
Thanks, same board I have and am thus far unable to get my dual rotary encoders for the GNS 430/530/GTN 650/750 setup. I'm sure I'm doing it wrong lol. I'm hoping this will be of help.
Hi thanks for watching I am not sure what the problem could be sorry
How do you change jour controls
Just use the settings control options in fs2020 or any software the games recognise the button presses. Thanks for watching
Hello i enter your discord but I can’t get permission.
my compliments for a very clear explication and thank you for speaking a very good english slowly.I appreciate 👍🤝
Glad it was helpful!
Now that ETS2 allows you to control soo much more of the truck that side panel would come in handy
Out of curiosity was your switches and buttons done using a matrix?
from what i see only the panel worth all the other parts have quality and specs in plastic garbage category (quality on panel is garbage 2 but you can use in many games not only farm
Hi, great work with the tutorials! A quick question. Is it possible to edit your assigned buttons for the x-touch in A&OH without having to have MSFS running? Basically, in offline mode.
Yes you can setup your profile offline and then assign it to an air craft later
Can this board light up a switch when it’s in the on position🤔
Not the way it’s setup as it uses the Lrobodner board if you were to replace this with an arduino you could assign outputs to leds. Thanks for watching take a look at bits and droids channel I think he can help 👍
Hi there. May I ask why the Fader in A has to start at number 9? Why not simply assign it as zero or one?
I think you can assign them to what ever you want it was just because I wasn’t using the fader I didn’t change it. Thanks for watching and if you manage to change it to zero or one please let me know thanks again 👍
Thank you for this video! My AnyCubic Mega Stopped in the middle of a print...and say bed temp was 24C. Worried that the bed heater plate was the issue, I cannot find a replacement 220x240. Digging further I located your troubleshooting vid. It's not the bedheat plate but as you point out its the Mosfet ! Simple fix!!!!!! Thank you again for the time and knowledge you provided. Great voice you have for instruction. Regards, Mike USA
Thanks for watching Happy New Year more videos in 2023
i have a problem when i turn an encoder rapidly it starts spinning the other way
Hi thanks for watching there is a problem with encoders called bounce. If you were using your own circuit there are things you can do to reduce this bounce effect but unfortunately with the xtouch there is nothing you can do. You can change between the function of hundreds and thousands of feet in the altitude to increase the rate. U hope this helps and thanks for watching and supporting the channel 👍
One Question, what ever I do the AAO does not recognize when I turn, crank or push any buttons. I watched your Videos over and over but I did not miss anything. Do you have any Idea????
Are you using a usb 3 plus I’m not sure if it works with windows 11
@@togatech1111 Yes, I am using USB-3 but windows10. For 3 day's I am trying with no luck. I an going crazy😜😜.
Does the device show up in windows under midi devices
@@togatech1111 where wold I find that, in Controls?
Sorry, I am running a German System and we call it different names. I checked in the System Manager and it is under audio/Video and Gamecontroller as X-Touch Mini.
hi. thanks for the tutorial. do i need to set all the channels to the same number?
The channel number stays the default which are all the same 11. The only thing you need to change are the Type from note to cc and assign a unique number to the No. from cc0 to as many as you need. I hope this helps