Solo Lap
Solo Lap
  • Видео 190
  • Просмотров 440 374
INSTALLING A CARBON BONNET ON THE GTI-R
As the title says, finally got round to installing some of the carbon on the Pulsar! This time, it's the carbon bonnet from Knightracer in the UK :)
Просмотров: 242

Видео

Fitting Custom Braid Wheels Onto The GTiR 👌
Просмотров 3997 месяцев назад
It's that time again when I go buy custom wheels because the perfect fitment (without spacers), just doesn't exist... This time, I went with the Spanish motorsport wheel manufacturer, Braid. Braid are known for extremely tough wheels and they also offer a bespoke service. Many emails, photos and months and here we are.
HOW EASY IS IT TO REPAIR DAMAGED CARBON FIBRE?
Просмотров 7408 месяцев назад
I bought a carbon boot lid recently for the Nissan and sadly (as is often the case) it arrived with some edge damage. So I thought it would be a good opportunity to see just how easy it is to actually repair damaged carbon. Let's find out!
FRONT RUNNER FOOT REST FITTING IN THE GTIR
Просмотров 798 месяцев назад
Short one this week! I stumbled across a company in Aus called Front Runner Motorsport, they make several parts for the GTiR including Nismo replica items such as this footrest. I got talking to them and they made me one in black powder coat (normally they're bare aluminium), and it arrived today :)
HOW TO INSTALL A NEW DIPSTICK HANDLE ON YOUR EVO
Просмотров 3819 месяцев назад
Nice and short video for once! I picked up one of the awesome titanium dipstick handles from JDC in the US and today it arrived, so here's the install :) Music from #InAudio: inaudio.org/ Grey Clouds
HOW TO SETUP YOUR CAMBER USING CAMBER BOLTS AND YOUR PHONE!
Просмотров 1,8 тыс.9 месяцев назад
I've been measuring and measuring for new wheels recently and just as I thought I was all set with width and offset, I noticed the camber on the Nissan, especially at the rear was...shall we say 'poor' looking. So I decided before I pull the trigger on the new wheels that I'd do something about the camber by using camber bolts AND set them up via my phone... Music track: Coastline by shandr Sou...
PROJECT EKP HONDA MIRRORS ON A NISSAN!
Просмотров 1189 месяцев назад
The oem mirrors on my Pulsar were not great...Not sure why, but they weren't manual, and they weren't electric, so you could only adjust them by pressing on the glass and they moved constantly! After much searching, I came across some Nissan Motorsport/Garage Defend style mirrors from a company called Project EKP. I took some rough measurements, and ordered a set, thinking (after doing this sor...
UNBOXING CARBON GOODIES FOR THE PULSAR GTIR!
Просмотров 30810 месяцев назад
I needed a bit of a pick me up with the cars, as of late the various jobs I've been doing have just seemed never ending for one reason or another... So when I realised that RallyTech in the UK also offer their awesome carbon door cards for the Pulsar, I ordered a set hoping they'd be just the pick up I needed...but things don't always go to plan!
FITTING THE 242g REVERIE CARBON STEERING WHEEL IN THE GTIR
Просмотров 11710 месяцев назад
I've ALWAYS wanted to buy a carbon steering wheel...just have to get that out there, but for some reason, I just never have, until now that is!
HOW TO CONVERT ORANGE LENSES TO CLEAR WITHOUT USING AN OVEN!
Просмотров 32711 месяцев назад
When I got the Pulsar it had lovely clear side lenses but one was cracked so I replaced them with new lenses and sadly, they had orange covers inside and it bugged me... So fast forward several months and I decided to fix it, mainly as I wanted to see if it would be possible to do without the usual separating/baking/oven technique. I imagine this can apply to a lot of lenses, you'll just have t...
FITTING A PRO ALLOY EXPANSION TANK ON THE EVO V
Просмотров 17711 месяцев назад
I started making this video once (with a tank from STM Tuned) but the tank didn't fit because my car has poly engine mounts! So let's try again, this time with the all singing and dancing tank from the guys at Pro Alloy in the UK.
USING HELPER SPRINGS TO LOWER YOUR RIDE HEIGHT
Просмотров 78711 месяцев назад
In a recent video I fitted some fantastic Meister R coilovers to the Pulsar BUT although the fronts had plenty of room to go low, the rears just weren't quite what I was after because my car is lighter.... So after some discussion with Meister, we decided that installing some helper springs on the rear might help and give me the ride height I was looking for! It's worth saying that this approac...
FITTING REVERIE MULSANNE C CARBON SEATS IN THE GTiR!
Просмотров 20011 месяцев назад
Following on from the test fit video I made recently with the Pulsar, the seats arrived from Reverie, so let's see what they're like and get them in the car!
TAKING THE TOUR AT KAISER CLASSIC IN STOCKHOLM!
Просмотров 207Год назад
A while ago I spotted a rather nice 190E with Evo 2 bodykit for sale here in Sweden at a company called Kaiser Classic. I got talking to the salesman there, Greg and we realised quite quickly that we were both from the UK! The 190E didn't pan out at the time, but I kept in touch with Greg and when my player 2 and I found ourselves in Stockholm, I asked Greg if he was around for a visit and he w...
THE GTiR GETS SOME BUCKET SEATS (SORT OF)...
Просмотров 120Год назад
This isn't so much of a how to video, but more of a 'how I intend to' video :P I decided that while I was waiting for the new seats to arrive, I'd test fit the Planted subframes and one of the Sparco seats from the Evo in the Pulsar as I figure out how I want to do things.
INSTALLING MEISTER R GT1 COILOVERS ON THE GTiR (PART 2 of 2)
Просмотров 300Год назад
INSTALLING MEISTER R GT1 COILOVERS ON THE GTiR (PART 2 of 2)
INSTALLING MEISTER R GT1 COILOVERS ON THE GTiR (PART 1 of 2)
Просмотров 320Год назад
INSTALLING MEISTER R GT1 COILOVERS ON THE GTiR (PART 1 of 2)
HOW TO MAKE YOUR OWN CARBON SLAM PANEL (PART 3 of 3)
Просмотров 141Год назад
HOW TO MAKE YOUR OWN CARBON SLAM PANEL (PART 3 of 3)
HOW TO MAKE YOUR OWN CARBON SLAM PANEL (PART 2 of 3)
Просмотров 327Год назад
HOW TO MAKE YOUR OWN CARBON SLAM PANEL (PART 2 of 3)
HOW TO MAKE YOUR OWN CARBON SLAM PANEL (PART 1 of 3)
Просмотров 362Год назад
HOW TO MAKE YOUR OWN CARBON SLAM PANEL (PART 1 of 3)
BLITZ VS K&N VS AFE...AIR FILTER SOUND OFF!
Просмотров 3,2 тыс.Год назад
BLITZ VS K&N VS AFE...AIR FILTER SOUND OFF!
MAKING AND FITTING A CUSTOM SUN STRIP ON YOUR OWN
Просмотров 253Год назад
MAKING AND FITTING A CUSTOM SUN STRIP ON YOUR OWN
GTiR AFTERMARKET EXPANSION TANK INSTALL
Просмотров 211Год назад
GTiR AFTERMARKET EXPANSION TANK INSTALL
FITTING A 3D PRINTED HEADLAMP DUCT TO THE GTIR
Просмотров 354Год назад
FITTING A 3D PRINTED HEADLAMP DUCT TO THE GTIR
INSTALLING A CATCHCAN ON THE GTIR
Просмотров 293Год назад
INSTALLING A CATCHCAN ON THE GTIR
MAKING YOUR OWN RACE CAR SWITCH PANEL
Просмотров 3,5 тыс.Год назад
MAKING YOUR OWN RACE CAR SWITCH PANEL
RELOCATING THE BATTERY TO THE TRUNK ON A PULSAR GTIR
Просмотров 277Год назад
RELOCATING THE BATTERY TO THE TRUNK ON A PULSAR GTIR
SO FAST IT GAVE ME GOOSEBUMPS!
Просмотров 792Год назад
SO FAST IT GAVE ME GOOSEBUMPS!
WAS THIS THE GREATEST EVER ESCORT COSWORTH BUILD?
Просмотров 54 тыс.Год назад
WAS THIS THE GREATEST EVER ESCORT COSWORTH BUILD?
WHAT CAUSES A SPONGY CLUTCH PEDAL ON THE PULSAR GTIR (AND HOW TO FIX IT)
Просмотров 1,5 тыс.Год назад
WHAT CAUSES A SPONGY CLUTCH PEDAL ON THE PULSAR GTIR (AND HOW TO FIX IT)

Комментарии

  • @gaatjegeenrukaangek6
    @gaatjegeenrukaangek6 День назад

    question, is the ventilation on the rear bumper actually functional? or simply to save weight?

    • @SoloLap
      @SoloLap День назад

      @gaatjegeenrukaangek6 I mean, it wasn't tested in a windtunnel 😂 but a bit of both. Air definitely came out of all the vents on the rear, you could tell when it was dirty.

    • @gaatjegeenrukaangek6
      @gaatjegeenrukaangek6 День назад

      @ hmm, maybe the air from under the car, a flat bottom might have helped then? Sick build though, thinking of buying the gt for home to work transport.

  • @ys987yy8
    @ys987yy8 3 дня назад

    Blitz is better when tuned right.

  • @jetforce880
    @jetforce880 3 дня назад

    You did a very great job! Thank you for this video to see how much work it is 😮

  • @djduffa
    @djduffa 6 дней назад

    Rekon it will stick down well on exposed carbon (under a carbon hood)

    • @SoloLap
      @SoloLap 6 дней назад

      @@djduffa 100%

    • @djduffa
      @djduffa 4 дня назад

      Sweet, yeah it’s not really got any resin over it under the bonnet, just a rough texture

  • @dosullivan5213
    @dosullivan5213 15 дней назад

    Hi, would you know if there’s a harness for a Honda Integra DC5, I cannot find one online and I’d rather not have to cut into the existing wiring.

    • @SoloLap
      @SoloLap 14 дней назад

      @dosullivan5213 if you've searched for dc5 turbo timer harness and nothing shows, I don't think so. Maybe because people only believe timers are for turbos.

    • @dosullivan5213
      @dosullivan5213 14 дней назад

      @ thanks for that, I have my dc5 fitted with a turbo, I just hoped that there was something available. I guess not though.

  • @radioactivepotato2068
    @radioactivepotato2068 15 дней назад

    I can't say I expected so much go after that much show. Humbled.

    • @SoloLap
      @SoloLap 15 дней назад

      @radioactivepotato2068 Stian is a bit of a legend in the Nordics, he holds several lap records on various tracks here.

  • @jackauslondon
    @jackauslondon 19 дней назад

    Hey - Are U good? Greetz.. :)

  • @doug774
    @doug774 Месяц назад

    Anyone know if r32 seats fix in gtir?

  • @matteovrizzi
    @matteovrizzi Месяц назад

    holy Mother of God, how much did you spend?

    • @SoloLap
      @SoloLap Месяц назад

      @@matteovrizzi I don't think it was actually so much? Not compared to my other builds 😂

  • @justin6581
    @justin6581 Месяц назад

    What a downgrade, instead of 120W, you get 10W? And you cannot plug in anything from a mini fridge, to a tire pump? IMO you should have kept both the 12V outlet and USB port.

  • @vannaspb
    @vannaspb Месяц назад

    Боже. Какой колхоз. Как жалко эту машину 😢

  • @InNfinity-s3w
    @InNfinity-s3w Месяц назад

    Where are you based please and how much would you charge please

    • @SoloLap
      @SoloLap Месяц назад

      @@InNfinity-s3w I'm based in Munkedal, Sweden.

  • @ChrisWhite.fishing
    @ChrisWhite.fishing Месяц назад

    Better explained than on the nightmare bureaucracy website Swedes have.

  • @pakdaus_19
    @pakdaus_19 Месяц назад

    Kakimoto also made the universal version right? Can I get the exact specs of your exhaust like tail diameter, pipe diameter, etc?

    • @SoloLap
      @SoloLap Месяц назад

      @@pakdaus_19 I believe so. I haven't been round the cars for ages now, not really been feeling it of late.

    • @pakdaus_19
      @pakdaus_19 Месяц назад

      @@SoloLap Ah, I see

  • @witek1981
    @witek1981 Месяц назад

    Hi, where can I buy this panels?

    • @SoloLap
      @SoloLap Месяц назад

      @@witek1981 rallytech in the UK!

  • @viktorvucic3239
    @viktorvucic3239 2 месяца назад

    I just searched a while and didnt find it for the Evo 5,6 just CT9A 7,8,9 where can i find

  • @MattEdwardsRallying
    @MattEdwardsRallying 2 месяца назад

    Hi. Where do you buy this?

    • @SoloLap
      @SoloLap 2 месяца назад

      @@MattEdwardsRallying I made it Matt. It's a Lenovo 8" tablet running the Maxxecu software

    • @MattEdwardsRallying
      @MattEdwardsRallying 2 месяца назад

      ​@@SoloLapthat is awesome. I love it.

  • @NBC_NCO
    @NBC_NCO 2 месяца назад

    Front engine rear drive or AWD. That's the only way to build a proper car.

  • @MarcovdWesthuizenSADrummer
    @MarcovdWesthuizenSADrummer 2 месяца назад

    Hey dude I'm replacing my front bumper on my Nissan Sentra Sti160 n14 sedan but have never removed the front bumper so could you help with where all the mounting spots are ? I would really appreciate it!

    • @SoloLap
      @SoloLap 2 месяца назад

      @MarcovdWesthuizenSADrummer is it the same as the gtir? If so it's one central behind the grill, 1 each side under the indicators lens, 1 each corner of the bumper in the arch and possibly a few underneath. My car is modified so different layout.

    • @MarcovdWesthuizenSADrummer
      @MarcovdWesthuizenSADrummer 2 месяца назад

      @@SoloLapyes exactly the gtir front end ..thanks!!

    • @MarcovdWesthuizenSADrummer
      @MarcovdWesthuizenSADrummer 2 месяца назад

      ​@@SoloLap whats your email adress can i send you a few pics op my car ?! 😃

  • @Dominicsara
    @Dominicsara 2 месяца назад

    Hi If I am buying a used car from Germany do we need to pay any kind of taxes or what would be additional cost over car payment.

    • @SoloLap
      @SoloLap 2 месяца назад

      @Dominicsara as you're buying from the eu and it's an eu car, there won't be import costs and registering should be easier.

  • @danieljohnlevy
    @danieljohnlevy 2 месяца назад

    I cannot find the quick release for the boss kit

    • @SoloLap
      @SoloLap 2 месяца назад

      Ah, the quick release from B+G

  • @lindonandlisa8114
    @lindonandlisa8114 2 месяца назад

    I hope to get one love them

  • @recreepy
    @recreepy 2 месяца назад

    I'm genuinely impressed-bravo!

    • @SoloLap
      @SoloLap 2 месяца назад

      @@recreepy thankyou, lots happened since this.

  • @Honeyy0707
    @Honeyy0707 2 месяца назад

    Which hub you used ?

    • @SoloLap
      @SoloLap 2 месяца назад

      @@Honeyy0707 it should say in the video?

  • @jigglerish
    @jigglerish 2 месяца назад

    The casual "that's what she said" killed me hahahaha

    • @SoloLap
      @SoloLap 2 месяца назад

      @@jigglerish 😂

  • @ivan73197
    @ivan73197 3 месяца назад

    Did you just change the connectors or add something else? Then the high beam stayed on at the same time?

    • @SoloLap
      @SoloLap 2 месяца назад

      @ivan73197 I didn't use a relay so the main beam and dipped would stay on together. That is what you'd have to use if you wanted that setup 😇

  • @Bendoverz34
    @Bendoverz34 3 месяца назад

    why do u need water if its already sticky

  • @lukejenkins9341
    @lukejenkins9341 3 месяца назад

    Just one problem i say it should be the original cossie style

    • @SoloLap
      @SoloLap 3 месяца назад

      @lukejenkins9341 each to their own I guess? I only like the cossie in original rally trim and we can let Stian off as this car was a wrc car from the start 🤓

    • @lukejenkins9341
      @lukejenkins9341 3 месяца назад

      @@SoloLap definitely

  • @richardhenrique678
    @richardhenrique678 3 месяца назад

    Awesome 👏🏼

  • @sonofableep13
    @sonofableep13 3 месяца назад

    Where did you source this exhaust man I can’t find anything about the gt1.0z for cp9a I’m thinking this is partially custom, I want the exact same thing can you help point me in the right direction?

    • @SoloLap
      @SoloLap 3 месяца назад

      @sonofableep13 I found it on the German Ebay. I was just super lucky. They don't make them anymore and didn't make so many. I love the thing and it's currently flowing fine at 662whp.

    • @SoloLap
      @SoloLap 3 месяца назад

      @sonofableep13 it's a proper unicorn item. They are normally titanium, sadly this one is just stainless but still!

  • @fortuna_7777
    @fortuna_7777 3 месяца назад

    This is true airplane!! I usually call such cars airplanes!!☝️😊✈️🇯🇵🏁☀️☘️

  • @Iluuu5
    @Iluuu5 3 месяца назад

    Please tell me where can I get the right manifold for my clio 2 from 2003 1.2 16v Benzin.

    • @SoloLap
      @SoloLap 3 месяца назад

      @@Iluuu5 not sure, sorry.

  • @rentandracepl
    @rentandracepl 4 месяца назад

    Send me your e-mail please, just want to share some other thoughts and ask you some questions. thanks!

  • @tomiradziowski7934
    @tomiradziowski7934 4 месяца назад

    Piękna

  • @dntbadk
    @dntbadk 4 месяца назад

    Finally an install that solves my problem. I have some wiggle room in the bonnet when I close it so I wasn't sure how I'd line up the top hole with the pin. But your vid answers it. Hold the bonnet down where you want it, drill the pilot hole through the hood first, and then you also have your pin hole in the right location. Absolutely Brilliant! Three years later and still helping people out with this. Thanks Mark.

    • @SoloLap
      @SoloLap 4 месяца назад

      @dntbadk glad it helped you! I've fitted so many pins over the years and this never fails to work. Especially using the clear box to make a template with for the catch itself.

  • @izlk
    @izlk 4 месяца назад

    Beautiful car, may i know what was the spring rate for the helper springs ?

    • @SoloLap
      @SoloLap 4 месяца назад

      @@izlk you'd have to ask Miester R, I can't remember now 🙈

  • @Jay-oj4tm
    @Jay-oj4tm 4 месяца назад

    Do you have any information for importing cars from Canada or America? I'm interested in importing pickup trucks to Sweden.

    • @SoloLap
      @SoloLap 4 месяца назад

      @Jay-oj4tm same process I imagine. You'll have to pay import duty and moms on the vehicle, then you just need to get it ready for the test. If it's a known vehicle, getting the c.o.c should be easy enough.

  • @ZZZWorks
    @ZZZWorks 4 месяца назад

    Much More power could be helpful... Nice car.

    • @SoloLap
      @SoloLap 4 месяца назад

      @ZZZWorks it would change the character too much I think 🤔

    • @ZZZWorks
      @ZZZWorks 4 месяца назад

      @@SoloLap I like the spider as it is. Big smile. Street or Cup. A nice racecar, but only in his own class. In common with other racers the classic A110 will always win. That depends on weight and power.

    • @SoloLap
      @SoloLap 4 месяца назад

      @@ZZZWorks and driver 😉

  • @mauriciogarcia-mm1br
    @mauriciogarcia-mm1br 4 месяца назад

    congratulations! a very nice project, a question, how works the aluminium indlet? do you have a real change in performance?

    • @SoloLap
      @SoloLap 4 месяца назад

      The aluminium one was garbage, it was poorly designed and made for a turbo conversion. The JMS carbon one was a lot better.

  • @ianhoyle8459
    @ianhoyle8459 5 месяцев назад

    Really nice project you captured on film.

    • @SoloLap
      @SoloLap 5 месяцев назад

      Thankyou!

  • @myCarModsBestPrice
    @myCarModsBestPrice 5 месяцев назад

    I have this very Gatebil DVD. Long story behind how i got it over here in the uk back in 2006. Its very much the all time ultimate escos build. Stunning. There is a tribute car in england and its frightening how similar it is. Its basically a rhd clone. Gorgeous.

    • @SoloLap
      @SoloLap 5 месяцев назад

      Sounds like my story getting the dvd maybe!

  • @myCarModsBestPrice
    @myCarModsBestPrice 5 месяцев назад

    Thanks bro appreciate it... looking for more videos on starlet

  • @arne6787
    @arne6787 5 месяцев назад

    Mapp gas is useful because it burns hotter and you can hold the can in any position too. The screwdriver seems to help spreading the braze metal around when you can't get quite enough heat in there.

    • @SoloLap
      @SoloLap 5 месяцев назад

      It's still holding up today!

  • @Am-ld7gp
    @Am-ld7gp 5 месяцев назад

    Did you switch to 17s in the end ? Do they fit over 356mm brakes with the std calliper ?

    • @SoloLap
      @SoloLap 5 месяцев назад

      No, I kept the 18s on the car iirc. Yes they fit over the larger discs!

  • @svenngunnarrustgard1228
    @svenngunnarrustgard1228 5 месяцев назад

    Hafsengen is a beast to drift 4wd

    • @SoloLap
      @SoloLap 5 месяцев назад

      He's a beast, period. 😇

  • @amacca2085
    @amacca2085 5 месяцев назад

    Remember that in fast for didn’t henning solberg help build it

  • @talibancat393
    @talibancat393 5 месяцев назад

    Any advice for someone looking to getting into track racing on a low budget?

    • @SoloLap
      @SoloLap 5 месяцев назад

      Do you have a car already?

    • @talibancat393
      @talibancat393 5 месяцев назад

      @@SoloLap no not yet

    • @SoloLap
      @SoloLap 5 месяцев назад

      @talibancat393 ok, well if you just want to improve your driving and have fun, just buy something cheap, like a Clio RS, invest in some good rubber, better pads and fluid, seats and harnesses and then strip out excess weight. The less extreme you go, the cheaper and more reliable you are. Once you reach a decent level, upgrading suspension is a good idea. The fastest people I know on track, who have the most fun, are the ones with the simplest cars.

    • @talibancat393
      @talibancat393 5 месяцев назад

      @@SoloLap Thanks so much for the detailed response! I'd have a look round for something to get my foot in the door with, cheers.

  • @piskopow
    @piskopow 5 месяцев назад

    it was. yes.

    • @SoloLap
      @SoloLap 5 месяцев назад

      Agreed.

  • @mhateys
    @mhateys 5 месяцев назад

    This guy has now a crazy crazy fiesta

    • @SoloLap
      @SoloLap 5 месяцев назад

      Yep, around 1,000hp if I remember right. It's so great that he continues to compete in events and do well

  • @secarianu
    @secarianu 5 месяцев назад

    Gorgeous craft! I will try my best to make some pieces for my Renault, fingers crossed! :D

    • @SoloLap
      @SoloLap 2 месяца назад

      good luck!