Видео

Change playback speed to 1.25x. You're welcome.

Thanks for showing this install. This was very helpful when I needed to change not only blinkers but the caps to black on my CT4 V. The mirrors are the same as the ats on the ct4s. There's really no one posting om how to do mods for the ct4 so gotta find content like this to help me diy.

36.4 Ohm? Wooow. That's a pretty low quality resistor! Is that supposed to be 33 or 39 Ohm? I mean, it is within tolerance, and it doesn't really matter...

19Ohm? That's a weird value?? Anyway, you can measure before removing it from circuit to avoid being unable to measure it due to mechanical damage (or if you desolder it, bridging solder). It's not like a capacitor that way. It doesn't even have to be very accurate. You're just gonna use a higher value resistor anyway. Also, you have the soldering iron, so why risk damage to the soldering pads with brute force?

Thanks. A question, this does not use transformer, only the tube? Also, it does not have the output in the preamp section, how can the gain be attenuated after the input is driven harder to get some saturation, does the EQ get overloaded?

For small heat reduction (and bright) you can add classic diodes in series

It is not a teardown but removing the cover. I did the same and planning the teardown, troubleshooting and repair soon if the owner is willing to pay.

Great video. Im mostly worried about passing speed and it looks like Toyota RAV4' got it.

I've got overheating after on and several minutes working by this model - router gone to freeze, and then reboot needed. That circling continuously... And stops after cooling fan set under router ,and then working correctly without freezes

They use low-efficacy diodes in the first place. And yes they drive them hot :) Bought LM301B boards and an 80% efficient Mean Well driver resulting in 160lm/w efficient light :) Instead of 100lm/w of the cheap LEDs or 210lm of the most efficient filament LEDs from Philips, Osram, and Ledvance.

Isn't it a better idea to use led strips insted of light bulbs ? because leds in led strips are more spread so won't overheat.

Another way to extend the life of the bulb is to connect a 5 uf capacitor in series with the bulb. BigClive did something similar on his channel to turn regular bulbs into "Dubai" bulbs that only use 3 watts without taking the bulb apart.

Was that a 5 watt resistor?

I love messing around with these everyday items and modifying them in any way possible. However it's just too obvious what the higher resistor value will do. My personal approach wouldn't ever include making the bulb decrease in intensity. I want to double or triple the output. I want that led squad to burning blindingly, smoking bright, like a tactical weapon! I know, I don't havre to get a step ladder out and fuxc around every time one dies. Lasting interminably is soooo dull and boooring. Let's get some dynamics. Some over the top heat sinks loaded with computer fan motors strapped tightly to our small array, potentially blinding, hopefully dangerously intense. Like an arc welder. If you get a half dozen or so powered up correctly, I mean a half dozen of the small groups, which I call a squad, all lined out, parallel circuited to the nearest 15 Amp breaker, you can have a wild and unnatural, untamed bright party, bordering on the neighbors might call whichever emergency unit they see fit, if they can even find there little black phone after FOOLISHLY staring out their kitchen window,mouths agape, burning a temporary blind spot in their vision apparatus(not really, wrong wavelength, but reasonably causing any pupil in the area to pin out, thus being vision inhibited for a spell, a witness to a veritable luminary volcanoes of sorts, strangely quiet but for the fan motors silent, alarming in its own right and fascinating we can create such a ridiculous spetical with a few power cords, a troop of xfmrs, and some various and sundry collected for the price of manual extraction led lights, never designed for the task they face, yet aurprisingly resilient and much much more powerful during their limited lifespan than any one would imagine. I understand you can, at times, view a bright spot coming from an anonymous source, while peering down at earth from an orbiting craft. Now THATS going to be hard to top, but I'm thinking about it. Nearly harmless fun For an old guy like myself, kind of a hobby, superhacking things, where I can. Keeps me out of trouble mostly. There's plenty of fun to be had, all sorts of mischief , always harmless, hopefully alarming, activities like the homemade hydrogen balloons that lent their accumulated lift to carry aloft one or two oxy-acetylene balloons and a long thin fuse. Ah but that's ,a story for a different time. Have fun- AND DONT BURN THE HOUSE DOWN!!!!😁,,-- ,

You get what you pay for. 💯

Would putting a small potentiometer in series with the new resistor work to make it variable?

Hi Michael! I need Help i got Focusrite Scarlett 2i4 Interaface, I use this in FL studio but the problem is, i cant use the EQ and something, dont work what can i do ? I test the Art Voice Channel and use it with USB direct it works but i dont here direct sound from my record and music u know ?

i really like how the backside is also designed nicely. don't find that often. i have the same monitor since 2019 and it really lokks good with my silver surface design keyboard and mouse. very very sleek and clean desktop setup. love it. the colors are good enough for my professional work, because it has 99%sRGB. The only downside is that there is an uneven screen uniformity with lots of backlight bleed around the corners and edges, most notably with dark colors. it served me good for the last years, maybe next year i will upgrade to a flat ultrawide or a two screen setup with 4k and professional color calibration.

I don't understand why you wouldn't go directly to the back of the Art Channel? It has more than enough juice to power that mic.

buy a ceramic socket base to hold the bulb

Man, I put eagerly the like for the work you published. Glad to see such explanatory video. I wanted to make such myself, but since it's present already there is no need to be for yet another one. This is very good investment in case of nature - longer life less trash on dumpsters. Longer life means you don't need to use scaffolding or very complicated ladder in highly reachable places, also it means less electricity consumption. Of course, quality of light is affected a little bit, but this is totally ok when we speak about some rarely used places. Consider drilling holes in plastic cap and base for the heat outflow. If lamp is in the closed or semi-closed fixture, holes are invisible and will decrease temperature.

Good information, thanks 🙏😃

It would have been so much easier to install a sliding dimmer switch and put a piece of duct tape across the top quarter of the slot.

Thank you for this can’t find any repair videos on this car

Title is wrong and confusing with missing units. There are 2 tests. 40-100 km/h in 4.25 sec 0-100 km/h in 5.5 sec That roughly checks out with other measured tests, where 0-100 is in 5.7ses with full tank.

Does unit have input transformer? Does output board in rear make the rear mic input sound better than front? I upgraded the tube to a 12ay7 genalex gold lion gold pin tube. Do I think it is a good idea?

td-w9970 dump file v2

Why did you order though hole resistor instead of an SMT?

Can not view clearly video poorly lit

My personnal solution to decrease heat : drill holes in the shell midway top/base avoiding touching the wires inside. The worst enemy of electronics is HEAT.

This is UNINTENTIONAL ASMR.

Scooter

This is the first lamp that I see (and I've seen dozens of them) that has a resistor easily changeable in the top plate. BTW, most of LED lamps have a current regulator inside; changing a resistor in series with the LED chain will make the regulator change the output voltage in order to keep the same current; I can't see how this could extende the lamp's lifetime.

If we talk about reduction of heat; the emission of heat has been taken over by resistance from LEDs. But heat will remain in bulb; in this case too. Hence no heat reduction and no life extension of LEDs as well. Please correct me.

can you make the same video while showing the road? i have a feeling you're going downhill considering that everyone else with a prime / across is getting mid 6 seconds to 100km/h

KM NOT MPH. But yeah they are fast! I absolutely love mine

I'd like to know how you got zero wheel spin? My Prime roasts the tires and kicks in traction control multiple times when doing full throttle starts from even 20 mph.

Awesome.

What type of adhesive is recommended for sealing the bulbs back on? I think I heard you say thermal paste, but I'm not sure.

WoW 😯 like a sport cars! electric power

זו אכן עצה טובה, אבל כיון שמה שלרוב נכשל אלו רכיבים שלא עומדים בחום הרב, אזי הדרך העדיפה היא: 1) להשתמש בספק כוח חיצוני (כמובן עם נורות תואמות). 2) לא לרכז כ"כ הרבה לדים בשטח קטן; כלומר, לפרוש בדומה לנורה פלואורסצנטית (וזה גם פחות יסנוור). והדרך העדיפה עליי, היא לבנות הכל מאפס, ולהשתמש ביותר לדים ובזרם נמוך יותר ועדיין לקבל עוצמת אור טובה מאוד! ביג קלייב עשה על כך סרטונים לאחרונה, עם נורות פיליפס שזמינות רק בדובאי... תוכל לראות כאן: ruclips.net/video/klaJqofCsu4/видео.html וגם כאן: ruclips.net/video/H09SI5qLmtY/видео.html מה שנמכר בארץ מהיצרן לדרסון (אצל מחסני תאורה), גם לא מחזיק מעמד (גם לא של ה-5 וואט), כי הם שינוי לחלוטין את המבנה הפנימי, שבהתחלה היה בנוי יחסית טוב מההיבט של פיזור חום/הרחקת הרכיבים. אני שמח לראות סרטונים כמו שלך ולדעת שהם נעשים על ידי שכן יקר! ברוך תהיה!

Hi Micheal, Thanks for the video.How long does it take to initialize the unit on power on? Thanks, Subbu

דרך אגב, כדאי שתקליט במצב מונו (או תגדיר ערוץ שמע יחיד בעורך הוידאו), כדי לפתור את הבעיה ששומעים אותך רק בצד שמאל...

יפה. כל הכבוד! לפחות הפעם לא ניתן להאשים את TP-LINK, כי מן הסתם המתג הוא מוצר מדף מיצרן אחר... חח

You should put the unit of measurement in the title

Alo evrery baty?

omfg, dislike because of no sound test here.

Can i measure dust in the air and Sulfur in the air with this?

What is the resistance ohm?

You going into the usb interface wrong you have to go into the interface via TRS 1/4 to bypass the mic pre on the interface