Видео

How you bypass from 4H to 2WD I also have code 33 and it only works in 4hlc and 4llc and when I go from 4HLc to 4H start blinking only orang light and is stuck in 4H

Hello. I have a 2002 year pajero. I have a problem with the drive. Namely, after 15, 20 kilometers, the central orange light starts flashing. If I then switch to 4x4, it doesn't work. When I turn the car off and on again, it works normally. Thanks for the answer, greetings from Slovenia :)

Excellent video! I recently bought a 2016 Montero Limited V6 4x4 in Mexico. Shortly after taking ownership the blinking differential orange light started popping on at higher speeds after 20 KM of driving. I was too late finding your video and I replaced the freewheel clutch solenoid (next to the battery) and this did not fix the problem. We have not used the 4WD in quite a while. When we tested it the other day, we got the 2 front wheels blinking indicator in every mode. Basically, the 4WD is not functioning. Is the detailed information in your video applicable to my 2016 model?

Thank you so much for this great video. One of the best videos out there regarding this problem. I have a 2008 Pajero 35" , which I can now diagnose better from your help. Thanks man! Kind regards from Iceland.

Very helpful video thanks for taking the time

Thank you so much.

I have code 33. I just changed all the sensors and it still isn't working. It started to function but now it's stuff in 4wd and I can't get it out of there and into 2wd. It also won't shift into 5th gear. Any ideas?

Tons of knowledge here! Thanks for making this video.

Thanks Mate

Dude thx! In addition to giving me much info on my 4wd system u saved me from stress in the last minute of your video. I recently tried shifting in 4wdl and the car started beeping. I tried everything to get it to stop and if I had not watched your whole video I would not have known about the need to be in neutral when shifting into 4wdl. So..I started the car, shifted into neutral and boom! All good. Much thx

Please I would like your help. There is the gear lever of my mitsubishi pajero manual gearbox which shakes a lot on takeoff. It also shakes when I slow down to stop for example. Often also It goes out while I am driving normally 80km/h. The mechanic checked the oil in the gearbox, it was missing, we added oil but the problem persists. He also checked the fuel injector pump but still the problem. Finally he told me that I have to change the clutch disc. Need your opinions please

Hi David I am from Zambia in Africa and must say I found your presentation quiet helpful, may I have more of your videos on such topics please.

from when i can get those codes sheets for my car? Mitsubishi Pajero 2016 NX V87 3 doors 3.8 petrol

I got 33 and 35. On actuator i try moving its not stuck. With change vacum line its disengate byt not engage. Also only on one line i have vacum. No mather if its 2h or 4h. How vacum work.

I got 23, the front propeller speed sensor system. I have no idea where or what that is. If you could that would be great

Thank you so much for this video. Do you have the full file for the fault codes? Mine currently have codes, 31, 38, 42, 52, 64 and 83. Any help please?

Thanks. Now I understand how this system works. I've got a 2003 Montero Limited, 3.8L, 217,000 miles. I've also got the infamous Differential Lock orange blinking light that would come and go for months and eventually stayed, and DTC 33 when I read the codes by jumping pins 1 & 4 on the OBD2 plug and counting the blinks. I also had codes 34 and 35 but after swapping the Freewheel Clutch Solenoid and disconnecting the battery for 5 minutes, the 34/35 codes went away and only 33 remains...the center orange light blinking and no control of the system remain also. The ground cable on the transfer case is good. All device plugs, vacuum hoses and wires are connected, clean and tight. Voltage reads 10.8-volts from each of the switches' harnesses with the ignition key On. I'm trying to figure out which Transfer Position Switch(s) (1 thru 5) is actually bad, before dropping the t-case to swap all 5 of them out. I want to be sure something else is not the issue making it look as of the switches are bad, as I hate swapping parts and doing unnecessary labor. I'm suspicious because I know the clutch solenoids were bad because I tested them, but I doubt they went bad, plus a t-case switch also...as in simultaneously. Maybe so, maybe not. I have a test light probe and a digital voltmeter/ohmmeter. Is there a test procedure to test each switch before dropping the t-case and removing them to be sure it is a switch (or maybe two) and not another issue? Thanks!

I have no blinking lights at all when started. Before start up all lights flash but after I start no lights. When I engage gears no lights what so ever

Hi my actuator on the transfer case isn't working the gears don't light up when I select it, any idea?

Great video. I have a transmission issue in 2003 Montero ltd. wheels lock middle of the road 2WD mode.

From Australia thanks man

Hi David just wondering if you know how to fix indicator light and hazard I try nearly everything Pajero 2006 NP diesel thank you

I have code 75 in my traction control i replace all sensor switches on my transfer case but still blinking center diferential and traction control

Do you have email I can ask questions and send a picture to? Need some help with replacing the actuator. Thanks

Such a helpful video. Thanks I have the same codes as you on mine. 33 and 41 would 41 pretty well be the actuator as well?

I have the centre diff light flashing when driving for a distance. I have a new vacuum solenoid and at the freewheel actuator there is suction in one pipe when in 2H and in the other when in 4H. However, actuator does not move in or out. It does move by hand so not seized. So I am guessing the actuator needs replacement?

mine continues to blink.... does that mean no codes

Legend - Thanks from Adelaide, South Australia

This video has given me so much information, appreciate you taking the time to record this

I got code 35 it apparently has to do with the solenoids

David I'm getting 2wheel high light but only the left rear tire light is on ?

Gonna try your advice. Thanks for making this video, David. Question: If the actuator is corroded, how can it be cleaned?

Thanks for the video very informative....will the 4wd and center diff engage although the lights are blinking?

Also do you know how to remove the plug? I been trying but no progress it was covered in carbon

Mine is blinking but only after driving for a while... i plan on checking the codes and then fixing it

what kind of bumper is that? is it custom?

Front wheel lights blinking green, no code 34 or 35 just code 27 for transmission range switch.

This video is very informative.My experience was to try all these things and when it came time to purchase transfer case switches I went for one of the cheap aftermarket sets (-$50).These actually made things worse as the vehicle would no longer shift from 4th to 5th and still had flashing lights.I rolled the dice and bought OEM Mitsubishi switches for $330 and like magic everything was working properly!

OMG, if you knew how this video saves my time, energy and patience ^^ Thank you so much. But hey i've got an other problem. I have to change the switches of the transfert box. But every time i buy one, or a pack of five, they are all of normaly closed type... Do you know where i can buy the right one ? The normaly open ? Thanks ;)

I am new to 4×4 and I got error 35 what can I do.

will this work on a 2011 montero sport? im afraid to cause a short?

Thanks for this great advice David, guys like you are what makes youtube so helpful!

Hi mate got a code 75 do you know where to start with a fix ?

thank you for posting

Hi, I have same problem with my Mitsubishi Pajero 2009 when I drive in highways with 90km/h speed and higher, the scan tool shows a code U1120 with super select 4WD. Do you know what the problem is? And could you please help me with this issue?

What is the behavior of the bad actuator?

Very informative video. Thank you. You seem to be very knowledgeable. I have a related issue with my 2004 that Mitsubishi can’t seem to figure out If you are willing to help I can send you a detailed description and video of the clunking rattling sound Thanks

Why no more videos ..this one was very helpful 👍

Does this work for a 2000 mitsubishi Delica L400

Hey david. I do have a code 33 on Montero, I replaced all 5 sensors, check the actuator and it is working, but the orange light still blinking and dosen't let the transfer lock on any position, Do you have some ideas or tips cause I try also the shifter and nothing works. . Thank you. Also if can show how you did the bypass.. thanks again..